Applied Biosystems ABI Prism 7900HT Sequence Detection System Lab Spares/Repairs

This system was removed from a lab as it was no longer required. It was in full working order prior  (more)to removal from the lab. An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber. Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again. Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II. The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k. We have not removed any parts from the system whatsoever.

Pacific Biosciences Sequel DNA Sequencing System This was removed from a university lab where it was (more) surplus to requirements. The unit powers up. The PSU is included. The system boots up but shows errors in relation to a smrt link server. There was no smrt link server on the client's network which is what caused this issue. It is in very good cosmetic condition but has a dent on one of the panels. Comes with:-(Boxed) Solid State Cooling SystemsModel - UC180PN - 10-180-G1-P20-RSN - 8008262No power supply to test. 1 x 30amp twist lock to 32amp 240volt cable Consumables:-1 x Sealed Pack of TX1009 AlphaWipe Polyester Wipers 9" x 9" (75 Wipes)1 x Sealed Pack of TX404 Absorbond Polyester Wipers 4" x 4" (300 Wipes)2 x Bottles of Sequel Coolant - Dynalene PG 30% - Both expired 2018/1921 x Pacific Biosciences 96 well Verification Plates6 x Bio-Rad Hard Shell 96-Well Sample Plates1 x Pacbio Sequel Pipet Tips v2 (sealed)1 x Pacbio Sequel Pipet Tips (31 tips left)2 x Boxes Sequel SMRT Cell Oil (5 left in one/6 left in other)1 x Tecan Conductive 200ul 96pcs rack (no tips)4 x Packs SMRT Cell Mechanical (1 sealed/3 opened)4 x Packs Pacbio Tube Septa (10 per pack)1 x Pack of 11 Pacbio 0.5ml Empty NFC Verification Tubes1 x Thermal Block1 x Pack TX759B CleanTips Swabs (100 Swabs, Sealed)1 x Uline Kapton Tape1 x Red Ethernet Cable2 x Pacbio Sequel Sample Plate Adhesive Foil

This system is being sold on behalf of one of our university customers. The system is in full workin (more)g order, complete with software, and was purchased in October 2015 for £90,000+VAT. If you are interested in the system and have any questions or want to make an offer please just get in touch.

This item has just arrived in our stock. Please enquire for further details.

DNA Sequencer, automatically analyzes DNA molecules labeled with multiple fluorescent dyes. After sa (more)mples are loaded onto the system’s vertical gel, they undergo electrophoresis, laser detection, and computer analysis. Electrophoretic separation can be viewed on-screen in real-time, and final data can be output in a variety of formats. The 377 system accepts gel plates in four different lengths for flexibility in sample analysis. Computer and software not included. Performance / Throughput: Performance 900 bases with 98.5% accuracy Production-scale Throughput (lanes per day) 24-96 samples Physical Specifications Width 74 cm (29 in) Height 81 cm (32 in) Depth 52 cm (21 in) Weight 103.5 kg (230 lbs)

The MiSeq System offers the first DNA-to-data sequencing platform integrating cluster generation, am (more)plification, sequencing, and data analysis into a single instrument. Its small footprint—approximately two square feet—fits easily into virtually any laboratory environment. The MiSeq System leverages Illumina sequencing by synthesis (SBS) chemistry, a proven next-generation sequencing (NGS) technology responsible for generating more than 90% of the world’s sequencing data.1 With the power of NGS delivered in a compact footprint, the MiSeq System is the ideal platform for rapid and cost-effective genetic analysis. Extensive suite of applications Explore an ever increasing range of sequencing applications. With faster turnaround time and simplified workflows, the MiSeq System offers a cost-effective alternative to sequencing by capillary electrophoresis and qPCR for applications such as targeted resequencing, clone checking, amplicon sequencing, and RNA expression. Local Run Manager Software and BaseSpace Sequence Hub offer optimized analysis workflows for small genome sequencing, 16S metagenomics, RNA sequencing, targeted resequencing, and preimplantation genetic screening (PGS), as well as highly multiplexed applications such as amplicon sequencing with AmpliSeq™ for Illumina panels. Adjustable read lengths, flow cell options, and choice of single or paired-end reads allow flexibility for matching data output to a broad range of experimental needs.

This Dwyer Series 641-6 Air Velocity Transmitter was removed from a university lab where it was surp (more)lus to requirements. The unit is new and unused, but the box has been opened. The operating instructions are included. Dwyer Series 641-6 Air Velocity TransmitterModel: 641-6Serial#: IP60265-E44AC

MARSHALL Select MS-RO70 Tube Rotator Mixer, 10-70 RPM Speed Range 10 to 70 RPM Timing Range 1 to 1,1 (more)19 Minutes Motor Type DC Motor Features - Offers precise control with speeds from 10 to 70 RPM - Provides clear readouts of speed and time for easy monitoring - Adjustable from 0 to 90° to accommodate different sample types and mixing needs - Features a stainless steel plate with an oxidation coating for enhanced durability and corrosion resistance - Available in plastic or stainless steel for secure attachment of various sample tubes - Compatible with a variety of accessories to extend functionality - Provides consistent and reliable performance for various laboratory applications The MARSHALL Select MS-RO70 Tube Rotator Mixer is a versatile and efficient tool designed for precise and thorough mixing in laboratory environments. This mixer features an adjustable speed range from 10 to 70 RPM, allowing for controlled and consistent sample agitation. The LCD display provides clear readouts of speed and time settings, ensuring easy monitoring and adjustment. With an adjustable mixing angle from 0 to 90°, the MS-RO70 accommodates various mixing needs and sample types, enhancing its functionality and versatility. The robust construction includes a stainless steel plate with an oxidation coating, ensuring durability and resistance to corrosion, making it a reliable choice for long-term use. The MS-RO70 is equipped with high-quality clips made of either plastic or stainless steel, providing secure attachment for different sample tubes. The wide variety of available accessories further extends its adaptability, making it suitable for a broad range of laboratory applications. Operating within a temperature range of 5 to 40°C and featuring a timer range from 1 to 1199 minutes, this tube rotator mixer offers precise control over experimental conditions. Compact and lightweight, with overall dimensions of 10"L x 8"W x 10"H and a weight of 10 lbs, the MS-RO70 is designed to optimize lab space while delivering powerful performance. Compatible with electrical supplies of 100-220V, 50/60Hz, it is an essential tool for any modern laboratory. INCLUDED: The MARSHALL Select MS-RO70 Tube Rotator Mixer, 10-70 RPM includes: - 8 x 50ml Centrifuge Tube Plate - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Recessed construction of painted steel with welded corners on 4 sides mounted on a monoblock frame.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW