Olympus SIS Soft Imagine System Camera Control Panel & Accessories

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit This system was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp. Due to the faults listed above, this system is listed as Spares/Repair. The system comprises the following:- Leitz Vario Orthomat Controller - Leitz Power Supply for Lamp - Leitz Vario Orthomat 2 Camera - Leitz Wetzlar 100W Lamp (Type: 307-143.003) 5 x Objectives:- NPL Fluotar 6.3/0.20 - NPL Fluotar 16/0.45 - NPL Fluotar 40/0.70 - Leitz EF 63/0.85 - Leitz PL 2.5/0.08 2 x Leitz Eyepieces Periplan GW 10x MModel: Dialux 22-

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic Moticam X5 Plus Microscope Camera Highest Live Display Mode 1920x1080 Pixels Capture Resolutio (more)n 4MP Maximum Frames per Second (FPS) 30 FPS Features - 4MP (2560x1440 pixels) capture resolution - 1280x720, 1920x1080 pixels (Full HD) live display - Data transfer: Wi-Fi (2.4 & 5 GHz), Ethernet (RJ-45) - 30 Frames per second (depending on Wi-Fi strength) - CMOS sensor type (1/3-inch); C-mount lens mount The Motic Moticam X5 Plus is a 4 MP digital microscope camera with Wi-Fi and ethernet data transfer. The Moticam X5 Plus turns your microscope into a Wi-Fi station, allowing you to share your images with up to six devices at the same time by logging into MotiConnect from your tablet or smartphone. The Moticam X5 Plus follows our All-In-One-Box methodology. This means that with the included focusable lenses, eyepiece adapters, and glass calibration slide, you can convert almost any conventional microscope into a digital microscope. View, edit, capture and store your images in the blink of an eye, view live images on multiple wireless devices, and share your work with anyone in just a few clicks. The MotiConnect App makes data sharing possible in a collaborative environment, encouraging teamwork and collective learning experiences. Connect your Moticam to your computer if you wish to work with our well-known software Motic Images Plus 3.1, which comes included in the package as a download Click Here to View Product Video INCLUDED: The Motic Moticam X5 Plus Microscope Camera includes: - CS ring adapter - 12mm Focusable lens - Eyepiece adapters - Motic 4-dot calibration slide - Motic Images Plus for Windows/OSX/Linux (download) - MotiConnect (free app download) - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Perkin Elmer Clarus 500 GC-MS Gas Chromatograph Mass Spectrometer System Lab This system was removed (more) from a university lab where it was surplus to requirements. The system has been professionally serviced and is in good working order. It is in excellent cosmetic condition with minor marks. The full-service report is available on request.

Yamato WG-301UVUFR Auto Pure Remote Dispense Type 1 Water Purification System with UV and UF, 120V C (more)onfiguration Remote Dispense Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, remote dispense configuration water purification system in 120V with UV oxidation lamp and ultrafiltration. It produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, ultraviolet light for bacteria sterilization and TOC reduction, and ultrafiltration for pyrogen removal and nuclease free water. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WG-301UVUFR Auto Pure Remote Dispense Type 1 Water Purification System with UV and UF, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.