Metrohm 20ml Titrator dosing unit

This Mettler Toledo Titrator  Model - DL21 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on. It's supplied with a serial cable.

Metrohm 870 KF Titrino Plus with 703 Ti Stand 1.703.0010 Titration System This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in very good cosmetic condition with minor marks from use. Included are; 1x Metrohm KF Titrino plusModel 870Prog version: 5.870.0025 The unit powers on and is in good cosmetic condition. The digital display is working, however, there are some signs of screen burn, thus making it a little difficult to read the screen. It is completely readable though. 1x Metrohm 703 Ti StandType: 1.703.0010The unit is in good cosmetic condition but we were not supplied with the PSU, so have been unable to power it up for testing.

10ml dosing set for Metrohm titrator. Available in clear and tinted glass.

The Schott titration device type T80-20 is ideal for carrying out manual titrations and dosing using (more) the simple push-button operation. This device can be used, among other things, for equivalence point determinations. Burette capacity: 20mL Dimensions (WxDxH): 130 x 200 x 290 mm

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

S+B Plinth cabinet DT Ice blue 900