730 Sample Changer Titration

SCHOTT TITRONIC Universal Titrator 50ml Included: TM96 Stirrer Remote control Display: 8-line backli (more)t display Volume reading: 00.00–999.9 mL Display resolution: 0.01 mL Cylinder: 50 mL UV-protected DURAN® cylinder Dosing volume: 00.00–999.9 mL Dosing flow rate: 0.1–100 mL/minute (50 mL head) Filling time: 30–999 seconds (adjustable) Time range: 0.1 to 999.9 seconds Power consumption: 230 V%; 50/60 Hz Dimensions: 134x310x205 mm Weight: approx. 2.1 kg In good working order Traces on the display screen (see photos) Slight engine noise (piston) but fully functional

SCHOTT 10ml TZ 1210 syringe for titrator Reference: 312

The Schott titration device type T80-20 is ideal for carrying out manual titrations and dosing using (more) the simple push-button operation. This device can be used, among other things, for equivalence point determinations. Burette capacity: 20mL Dimensions (WxDxH): 130 x 200 x 290 mm

Mettler Toledo DO308 Karl Fischer Titration Drying Oven This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Metrohm 870 KF Titrino Plus with 703 Ti Stand 1.703.0010 Titration System This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in very good cosmetic condition with minor marks from use. Included are; 1x Metrohm KF Titrino plusModel 870Prog version: 5.870.0025 The unit powers on and is in good cosmetic condition. The digital display is working, however, there are some signs of screen burn, thus making it a little difficult to read the screen. It is completely readable though. 1x Metrohm 703 Ti StandType: 1.703.0010The unit is in good cosmetic condition but we were not supplied with the PSU, so have been unable to power it up for testing.

Hirayama HICLAVE HV-85II Floor-Standing Touchscreen Autoclave, 85L, 208/220/240V Chamber Volume 85L (more) Sterilization Temperature Range 105°C to 135°C Chamber Dimensions (Dia. x H) 16.5 x 24 in (42 x 61.5 cm) Features - Space-saving design with upward lid opening - Five operation modes with up to 8 memory settings per mode - Color touch panel for intuitive operation - Electro-mechanical lid lock system with one-touch lever - Dual interlock mechanism for enhanced lid safety - Programmable auto-start function, up to 1 week in advance - Digital and analog displays for temperature and pressure monitoring - Air removal system with dual detection for consistent sterilization - 11 alarms, including low water heating and over-temperature, with alarm history display - Memory backup system retains settings during power failures The Hirayama HICLAVE HV-85II Floor-Standing Touchscreen Autoclave, 85L, 208/220/240V, delivers advanced sterilization capabilities with its spacious chamber and versatile functionality. Designed for efficiency, it offers five operation modes—LIQUID, SOLID, WASTE, AGAR, and DISSOLUTION—each with up to 8 programmable memory settings. Its intuitive color touch panel ensures straightforward operation, while the space-saving upward lid opening and one-touch electro-mechanical lid lock enhance ease of use. The dual interlock mechanism adds an extra layer of safety, securing the lid based on both chamber pressure and temperature during operation. Equipped with programmable auto-start functionality, the HV-85II allows cycles to be scheduled up to a week in advance. It features digital and analog displays for precise monitoring of temperature and pressure, along with an advanced dual air removal system that detects and eliminates residual air during both gravity displacement and pressure exhaust phases to ensure optimal sterilization conditions. Safety and reliability are bolstered by 11 alarms and a memory backup system that retains settings in case of power interruptions. Built with a durable stainless steel (SUS304) chamber, the HV-85II is a dependable choice for laboratories requiring high-capacity, reliable sterilization performance.INCLUDED: The Hirayama HICLAVE HV-85II Floor-Standing Touchscreen Autoclave, 85L, 208/220/240V includes: - Bottom Plate - Drainage Hose - Exhaust Hose - Exhaust Bottle - Drain Bottle - 2 x Caster Stopper - 2 x Round Wire Mesh Basket - Power Cord - Operator's Guide - Manufacturer's Documentaiton - 1 Year Manufacturer's Warranty

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

Dimensions (HxWxD): 620 x 900 x 500 mm Internal dimensions (HxWxD): 580 x 860 x 475 mm

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-2 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), Ethernet, Analog output 4-20mA/0-10V.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.