Radwag TMX19C.60.C2.K Multifunctional Scale

Accuris SmartBlue Blue Light Transilluminator Safer for samples, safer for you: The SmartBlue Transi (more)lluminator is the perfect partner for the most common safe DNA stains. It emits blue light at a wavelength of 465nm, perfect for excitation of most green fluorophors, including Accuris’ SmartGlow, SYBR Green, SYBR Safe, SYBR Gold, GelStar, GelGreen, to name a few. The SmartBlue also works for excitation of EtBr. Exposing DNA to this wavelength does not cause molecular damage, and results in a much higher downstream cloning efficiency as compared to even short UV light exposures. In addition, the visible blue light is not damaging to the user’s skin and is less harmful to the eyes. Two position filter cover: The SmartBlue transilluminator requires no special shielding, however, the light does need to be filtered for visualization of the dyes. The amber cover, which rests above the viewing surface and gel, filters out the blue light, allowing the bands to be seen clearly. The cover can be placed at a 60º angle to provide easy access to the gel for band excision. For documentation, the filter cover is easily removed completely. Optional amber viewing glasses: The E4000-VG Viewing Glasses offer efficient blocking of the blue light wavelength from the SmartBlue illuminator, allowing clear visualization of the fluorescing DNA bands without the filter cover in place. These convenient glasses are recommended for users that are frequently excising DNA bands from gels. UI technology, bright and clear images: Engineered diffusers and filters provide an extremely evenly lit viewing surface. Even in ambient light, bands of DNA can clearly be seen in gels. Images obtained using the SmartBlue Transilluminator are brighter and more balanced than those obtained using epi-illuminators which light from the sides. Reliable, durable and long lasting: An array of super bright LEDs with a long, 30,000 hour service life provide the light source for the SmartBlue Transilluminator. Unlike those in a UV transilluminator, the filters in the SmartBlue will not solarize and degrade in performance over time. Gel bands can be excised directly on the scratch resistant, glass viewing surface. To save energy, the power switch includes an automatic 5 minute shutoff. INCLUDED: The Accuris SmartBlue Blue Light Transilluminator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327  (more)are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 8 x 7-18ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 20mm x 126mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor

Operation: Push button operation Number of programs: 8 programs Cleaning temperatures: 35°C, 40°C, 5 (more)0°C, 60°C, 65°C, 70°C Programs: Pre-rinse Quick program 30 min. 35°C Eco program: 50°C GlassCare: 40°C AquaFlex: Quick and clean: 60°C Automatic program 40°C-65°C Maximum cleaning temperature: 70°C Dimensions (HxWxD): 850 x 598 x 600 mm Weight: 46.8 kg

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Mettler Toledo IND690/PUA579 Checkweigher Lab Platform Scales PUA579-CS300 These were removed from a (more) working lab where they were surplus to requirements. The system powers up and is in good working order. it is in good cosmetic condition with marks from use. It comes supplied with 19 rolls of thermal receipt paper. ControlType - IND690 DeskSN - 3107324/2009 Type - PUA579-CS300SN - 3107323Dimensions - 120 x 105cm Printer type - GA46SN - 3107325

IKA RV 3 Rotary Evaporator w/ Dry Ice Condenser Features - Locking mechanism: red indicator shows un (more)locked position of vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The RV 3 Rotary Evaporator is the manual basic model in thefamily of IKA Rotation Evaporators. It finds a multitude of uses in thechemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Digital displays for speed and heating bath temperatureenable optimum control of all distillation processes.

Julabo FT402 Immersion Cooler, 115V/60Hz Working Temperature Range -40°C to 30°C Refrigerant R449A  (more)Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution - Integrated temperature control and display - With external Pt100 sensor (200 x 6 mm dia., stainless steel) JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT402 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic Panthera E2 Binocular Compound Microscope Manufactured to Withstand the Time With the new micr (more)oscope Series Panthera E2, your decision is distinct. This microscope series allows to experience Life Sciences in a new way, with the best possible learning effect. From now on, you achieve your teaching goals in the easiest way, with the highest precision and accuracy that meet all your intentions in mind. Even in a small lab with a small budget, these new technologies from Motic will convince you.Panthera E2 microscopes combine high-quality materials and precise engineering to a persistent and resilient construction. The smooth operation of the mechanics is self-evident for fast and reliable results, responsible for shifting your daily work in the classroom and lab to a higher level of quality. User-friendly design, robust for tough environments, and unique features grant the best performance. Models of this series convince positively in smooth operation and haptic.Robust Functionality for Demanding Environments Panthera E2 was developed by listening to your objectives in mind. Features like a reversed 4-fold nosepiece, a rackless X/Y-stage with a standard slide holder and an upper limit stop fulfill users' demands. The standard eyepiece tubes can be adjusted to accommodate different physiques. In addition, all tubes are rotatable. Together with a small footprint and compact design worries about small working places or storage problems are obsolete.Strong Optical Performance with Ultra Contrast Optics The Panthera E2 series is equipped with new Ultra Contrast (UC) Plan Achromatic objectives in a range from 4X to 100X magnification. These objectives together with neutral eyepieces guarantee the best performance in terms of color fidelity and contrast. A fully corrected intermediate image for digital access is granted. The optional 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure is considered too difficult and complicated.Efficiency and Energy Saving LED Illumination Setup The low consumption LED light source in a Fixed Koehler setup stands for a "cool" illumination with a long lifetime. An unbeatable key feature for outdoor activities: A USB port in the stand grants the functionality of the microscope independent from the mains by a power bank.Close to your Individual Applications Panthera E2 microscopes can be upgraded for different contrast methods: Phase contrast for unstained samples from botany, zoology, and medicine is a classic, Darkfield for impressive images from protozoa is on the verge of extinction, POL contrast for birefringent structures is an underrated method for biology and medicine. For plastics and foils from the industrial lab, this method is standard.Click Here to View Product Video INCLUDED: The Motic Panthera E2 Binocular Compound Microscope includes: - 4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm) Objectives< - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - 5 Year Manufacturer's Warranty

Dimensions (HxWxD): 780 x 900 x 600 mm

F2 Mass Standard - knob weights. Nominal value - 20 kg.