Radwag TMX19C.300.C3.K Multifunctional Scale

Hermle 4 x 250ml High Capacity swing out rotor The Hermle 4 x 250ml High Capacity swing out rotor is (more) a centrifuge rotor designed to be used with Hermle Z366 series centrifuges. This rotor is capable of handling a capacity of up to 4 x 250ml at a maximum speed of 4,500 RPM, with a maximum RCF of 3,735 x g. It is a reliable and durable accessory for laboratory centrifugation that can accommodate large-volume biological samples such as blood and cell cultures. The swing-out design of the rotor makes loading and unloading samples straightforward and efficient, while ensuring effective separation of particles into distinct layers. This rotor is an essential laboratory tool for those who require high-capacity centrifugation for routine or complex applications, and its compatibility with a wide range of laboratory applications makes it a versatile option for any laboratory setting. INCLUDED: The Hermle 4 x 250ml High Capacity swing out rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson Extension 1/2 in dia. With replaceable tip 101 148 013 Half wave disruptor horn extension, 5 (more)″ long, 1/2″ diameter, used to extend length of Branson 1/2″ diameter disruptor hornINCLUDED: The Branson Extension 1/2 in dia. With replaceable tip 101 148 013 includes: - Manufacturer's Documentation Request a Formal Quote

Modes DOS: Dosing with the ability to calculate a result from dosed volume DIS R: Repetitive dispens (more)ing DIS C: Cumulative dispensing PIP: Pipetting DIL: Diluting CNT D: Preparation of solutions with preselected content Volume of buret cylinder: 10 ml Resolution: 10 000 steps per buret cylinder Dispensing time for 100% burette volume: Analogue – 20 s to 17 min, Digital – 20 s to 17 h Dimensions (WxHxD): 240 x 450 x 275 mm Weight: 5.2 kg

A hardness tester according to the principle of “Brinell”, type Pessimetro S2, in combination with a (more) large surface table. The hardness of materials with a thickness of max. 10 mm. can be tested by means of 5 different (in size) pressure bodies with a fine adjustment of 100 gr – 20 kg. force can be applied. The size of the impression is measured digitally using a Mitutoyo 543-250B (in 0.001 mm.). The hardness of the material is then calculated in (kgf) and the area of the indentation. Compression bodies: 1.5 mm. / 11 mm. / 30 mm. Dimensions table (WxHxD): 40 x 8 x 55 cm. Weight: 40 kg.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Motic SM7-7TR-T Trinocular Stereo Microscope Objectives 0.8X~5.6X (10-step) Optical System Galilean (more) infinity optical design. Common Main Objective (CMO) Illumination LED 3W with intensity control Features - The SM7 features an optical performance with true color reproduction, high resolution and low distortion. - Ultra-flat stand bases for a relaxed positioning of hands and forearms facilitate lengthy preparation work. - A variety of objectives and eyepieces allow tailoring a personal SM7. - The Galilean Optics of the SM7 show a 7:1 Zoom system, resulting in a standard magnification range of 8X-56X. - For the best possible image results, a 1X Plan-Apochromatic objective with a Working Distance of 81mm is available. - Besides minimized chromatic and spherical aberrations, it is the resolution of the 1X Apochromatic objective which makes the SM7 especially interesting for technical applications. Motic's SM7 Plan Apochromat is meant specifically for opaque samples, as it comes with a plain stand, although external light sources can be implemented. The SM7 Series features an optical performance with true color reproduction, high resolution and low distortion. Motic's new Galilean stereomicroscopes are our new highlight in terms of color reproduction, resolution and spatial information for users from biology, medicine and incustrial QC. INCLUDED: The Motic SM7-7TR-T Trinocular Stereo Microscope includes: - 10X/22 eyepiece - Standard Stand LED Reflected/Transmitted - Glass Plate (Ø160mm) - PLAPO apochromat objective 1X, W.D.81mm - Trinocular tube - 7:1 zoom microscope body - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports Flow thru horn. 1/2″ diameter wit (more)h two 1/8″ npt ports, use with Branson SFX250, SFX550, S250A, S450A sonifiers, designed for the pharmaceutical industry, used for mixing, emulsification, dispersion, formation of mists and fogs.INCLUDED: The Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports includes: - Manufacturer's Warranty