Radwag TMX15C.6.F1.K Multifunctional Scale

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum temperature: 370°C Dimensions (LxWxH): 442 x 592 x 230 mm Bath dimensions (LxWxH): 590 x 440 (more) x 50 mm Weight: approximately 27 kg

19′ inch

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-41675 Triple red Duo water purification systemITEM-41499 pharmacia gradifracITEM-41500 gallenkamp magnetic stirrerITEM-41501 Gilson fraction collectorITEM-41502 Pharmacia Biotech FRAC-100ITEM-41503 Gilson 802C ManometricITEM-41504 MJ Research PTC-200 Thermal CyclerITEM-41505 ortholoc 9502 amplifierITEM-41506 Dell Optiplex GX110ITEM-41507 Jumo eTRON TITEM-41508 Gilson Dynamic Mixer 811CITEM-41509 Gilson 811C Dynamic MixerITEM-41510 Rodwell monostirITEM-41683 techne Hybridiser HB-1DITEM-41684 Hoefer Scientific Instruments PS500XITEM-41685 Consort E443 power supplyITEM-44386 pfeiffer balzer uno 016 b pumpITEM-41686 Pharmacia Biotech EPS 3500 power supplyITEM-41687 Ohaus precision Advanced unitITEM-41688 GRI LightboxITEM-41691 Biometra Standard Power Pack P25ITEM-41700 Harvard Compact Infusion Pump-Model 975ITEM-41701 Verderflex M500ITEM-41704 Pneuchange Automatic Gas Cylinder Change Over UnitITEM-41705 CareFusion Micro 1 SpriometerITEM-41706 VWR VV 3 VortexITEM-41707 Aria Pressure-Volume Conductance SystemITEM-41708 GeneAmp PCR System 9700ITEM-41709 Bibby HC502ITEM-41710 Techne Dri-Block DB.2AITEM-44464 Wallac 1295-012 Heat SealerITEM-44466 Techne Dri-Block DB.2DITEM-44467 Techne Dri-Block DB.2PITEM-44468 FisherBrand VortexITEM-44469 Eppendorf Heat Sealer Model 5390ITEM-44470 Hemocue Glucose 201+ MachineITEM-44471 VWR Mini VortexerITEM-44472 D2012 Mini CentrifugeITEM-44473 SLS Select BV1000 Vortex MixerITEM-44474 Branson 200 UltraSonic CleanerITEM-44476 Rotamixer DeluxeITEM-44478 Bio-Rad Semi Dry Transfer CellITEM-44479 Denver Instrument APX-402ITEM-44481 ES Overhead StirrerITEM-44480 VWR Kurogel Midi Plus Electrophoresis HorizontalITEM-44482 Engel VSTG 35/230/110ITEM-44483 LPS-220B Lamp Power SupplyITEM-44485 Motor Asincrono 90/60ITEM-44489 Millar Transducer Control UnitITEM-44490 7x Various Automatic Pipette Fillers And ChamberITEM-44491 Thermal PrinterITEM-44492 3x Xcell Surelock

Julabo DYNEO DD-300F Refrigerated Circulator with Analog Output, 115V/60Hz Refrigerant R134a Workin (more)g Temperature Range -25°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port. Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-300F Refrigerated Circulator with Analog Output, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The EM series mantle is made with extreme care and is hand sewn to assure its reliability, quality a (more)nd safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. Designed with flexibility and ease of use in mind, the EM series heating mantle is a reliable workhorse for your heating applications in the laboratory. All EM Electromantles have a built-in energy regulator with indicator lamps for power and heater operation. All mantles have support rod clamps as an integral feature and incorporate a grounded earth screen and double fuses for added safety. Flask capacity: 500 ml Material: Polypropylene outer case Max element temperature: 450°C Dimensions (DxWxH): 310 x 238 x 145 mm Weight: 1.25 kg

Getinge 46-series washer-disinfectors combine hygienic and ergonomic solutions with well-proven tech (more)nology for maximum user safety. Getinge 46-series Washer-Disinfectors offer a large chamber size with a minimal external footprint. Thanks to the built-in heat exchanger, the 46-series dries items effectively on both the inside and outside. Drying time and temperature can be preset for each program via the control panel. The display uses plain language to explain what’s happening in every stage of the washing and disinfecting processes. Simply select one of the six preset programs and press the start button. Wash levels (up to): 4 pcs Chamber volume: 201 L Internal dimensions (WxDxH): 550 x 620 x 590 mm Dimensions (WxDxH): 650 x 690 x 1860 mm

Shaker microplate MX100-4A. Ideal for agitation of plates in ELISA. Agitation for 4 microplates. Va (more)riable speed from 200 to 1500 rpm. Timer from 1 min to 99h59min. Resolution: increments of 10 rpm. Brushless Motor. Orbit 3 mm optional Rack for 20 tubes of 1.5 or 0.5 mL.

Memmert ICH750 Stability Climate Chamber 749L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750 Stability Climate Chamber 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH750 Stability Climate Chamber 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz  (more)2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Three-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with high vacuum requirements. Typical applications are parallel and rotary evaporators, concentrators, drying ovens and many other laboratory applications. The MD 4C NT has an outstanding performance for pumping large amounts of vapor, e.g., out of drying ovens and gel dryers. This powerful pump is at the heart of a complete family of well-proven and reliable vacuum systems and pumping units for larger lab applications.INCLUDED: The VACUUBRAND MD 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty