Radwag TMX15C.300.H5.K Multifunctional Scale

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Nikon BioStation Controller BS-ERG 810240 Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and goof mechanical order, we are unable to test it further at our facility.

This Thermo Scientific ARKTIK Thermal Cycler Type 5020 96 Well was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good working order. The only issue is the screen is very dark it is however still readable. It is in good cosmetic condition with marks from use. It is fitted with 96 Well Block.

Multiparameter photometer Hanna C99 with COD. It operates in three ranges: 0-150 mg / mL; 0-1500 mg  (more)/ mL and 0-15000 mg / mL. Specific ion analyzer programmed to analyze up to 39 parameters including COD. It has 4 tungsten lamps with narrow band interference filter 420/525/575/610 nm. Power supply with 2 9V batteries or 12V adapter (not supplied). Auto power off after 10 minutes of inactivity. RS232 port. User manual.

Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP2200ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP2200ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP2200ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200ecoplus Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 10 kg), wooden box Number of pi (more)eces in the set: 17 Weights 1 g i 2 g – solid masses without adjusting chamber

Labconco CentriVap 28 mm Acid-Resistant Rotor Easilyinterchangeable PTFE-coated aluminum rotors with (more) PTFE hubs hold tubes at anangle to maximize surface areas INCLUDED: The Labconco 7455201 CentriVap 28 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty