Radwag HX7.4.1500.H7/Z Multifunctional Stainless Steel Platform Scale, pit version

Four sensors platform scale No matter where you place the load on the platform, the result will alwa (more)ys be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. Conveniently, without ramps You can use the scale as a pit – this allows the load to pass freely through the platform without application of ramps. If you need a dual-range scale, we can make one for you at an extra cost.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V Capacity 20 L Speed Range 50 rpm to 1,800 rpm  (more)Plate Size 7 in x 7 in (18 cm x 18 cm) Features - Stirs up to 20 L with powerful, stable performance - Speed range adjustable from 50 to 1,800 rpm for various applications - Ceramic 7 x 7 inch plate for consistent mixing support - Clear LCD display with high contrast for easy monitoring - Ethernet, USB, and RS232 connectivity options available - Certified safe with CE and TUV certifications - Maintains speed stability within +/-2% - Programmable timer up to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V, delivers reliable and precise stirring for lab applications that require stable performance and versatility. Capable of handling up to 20 liters, it offers a wide speed range from 50 to 1,800 rpm, making it suitable for a variety of mixing tasks. Its 7 x 7-inch ceramic plate ensures even, consistent support for efficient stirring. Designed with user convenience in mind, this model features a bright, high-contrast LCD display for clear status monitoring and offers Ethernet, USB, and RS232 connectivity for easy data logging. Certified for safety with CE and TUV approvals, the Guardian 5000 e-G52ST07C includes a programmable timer that runs up to 99 hours and 59 minutes, providing a dependable, flexible solution for any lab setting. INCLUDED: The Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V includes: - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Ohaus STX2202 Scout STX Electronic BalanceIdeal for laboratory & industrial applications, the OH (more)AUS Scout features an easy to navigate color touchscreen display & a slim design which allows stackable storage. Geared for superior performance with fast stabilization time and high resolution weighing results, these portable balances set a new standard for a broad range of weighing applications. Features also include superior overload protection and expanded connectivity options. Large, resilient color touchscreen allows for effortless operation of the Scout through its informative icon driven menu structure, guiding the user through every step of the weighing application. Stabilization time as fast as 1 sec means increased productivity in your facility. Equipped with advanced weighing technology, the Scout also ensures repeatable and reliable weighing results. Integrated superior overload protection system rated at 10 times the capacity protects the balance in rugged and demanding environments. The space-saving, slim design allows for stackable storage. With expanded connectivity options including RS232, USB Host, USB Device, Ethernet and Bluetooth®, the Scout provides added versatility to your data collection and transfer needs. Click Here to View Product Video INCLUDED: The Ohaus STX2202 Scout STX Electronic Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA DB 1.4 VWR/Eppendorf Microtube Dry Block (2.0 ml)

Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-RotorFeatures - Designed to be compact, quiet, and p (more)owerful - Features high speeds up to 15,000 RPM and 21,631 x g - Program storage for up to 99 programs - 10 acceleration and 10 deceleration rates - Timer function up to 99 hours, 59 minutes or continuous operation - Imbalance identification system with automatic shut-off - Maintenance free induction drive - Motor driven safety-lid lock - "K" models feature a powerful CFC-free refrigeration system with a temperature range of -20°C to 40°C - "K" models also feature a pre-cooling function and reaches 4°C from room temperature in less than 10 minutes Features an easy to use control panel with the ability to display RPM/RCF, adjust acceleration/deceleration rates, change alarm tones, and much more The Z216 Series benefits directly from the versatility of 11 available rotor options for tube sizes between 0.2ml and 5ml Despite a remarkably small footprint in the lab, the Z216 series can nearly double the capacity of traditional microcentrifuges Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty