Radwag HX5.EX-1.4.6000.H9/Z 4 Load Cell Platform Scale, Pit Version

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump The Scilogex STORM5000 and STORM5000C di (more)aphragm vacuum pumpsare durable and chemical resistant. All contact surfaces are PTFE coated.STORM5000.STORM5000C vacuum pumps come with a liquid inlet trap and vacuumregulator making it a perfect choice for vacuum filtration, desiccation, andother mid-range vacuum applications. They are also bleach resistant, allowingthem to be used with cell culture decontamination protocols. INCLUDED: The Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus EX223 Explorer Toploading BalanceThe OHAUSEX223 Explorer Precision Balance with 220 gram weigh (more)t capacity, has newlyoptimized linearity and repeatability specifications and enhanced vibrationfiltering for better balance stability. All Explorer models also come standardwith AutoCal automatic internal calibration. These combined enhancementsimprove accuracy, efficiency, and throughput.A large colortouch-screen display, icon-driven application software that features 14 uniqueapplication modes, and an adjustable angle display make the OHAUS Explorerseries the easiest to use, most advanced balance in its class today.The base andterminal of the Explorer EX223 separate for maximum flexibility in any workarea. It also has four user-programmable touch free sensors to minimize crosscontamination and button wear. The EX223 meet or exceed the Class I and IIaccuracy requirements in accordance with the National Institute of Standardsand Technology (NIST) Handbook. 220g Capacity 0.001g Readability Platform: 130mm Large 5.7" full-color touchscreen display with intuitive set-up and application software AutoCal automatic internal calibration for optimized weighing performance 14 application modes, 11 weighing units and 5 display languages for a wide variety of applications 4 programmable touchless sensors for hands-free operation Modular display can be separated from the weighing base Frameless draftshield with anti-static glass, flip-top and large side entry doors on top-mounted bearings Click Here to View Product Video INCLUDED: The Ohaus EX223 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Vortex 2 Vortexer Type of Movement Orbital Speed Range 500 to 2,500 RPM Shaking Stroke 4 mm Fea (more)tures - Touch function - Suitable for continuous operation (low heat due to ventilation of motor) - Stable operation at high speeds due to silicon base feet - Infinitely adjustable speed range - Various applications possible because of 3 interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtiter plates, Erlenmeyer flasks 250 ml etc.), these need to be ordered separately - Attachments securely click onto appliance in any position - Special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks - Sturdy metal die cast housing The IKA Vortex 2 is a versatile vortex shaker suitable for both touch operation and continuous operation. It features an infinitely adjustable speed range, making it ideal for various applications with three interchangeable attachments and seven inserts, including tubes, microtiter plates, and 250 ml Erlenmeyer flasks. The sturdy metal die-cast housing and silicon base feet ensure stable operation at high speeds. Attachments securely click onto the appliance in any position, and a special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks. The shaker operates with an orbital movement and a shaking stroke of 4 mm, supporting a permissible shaking weight of 0.4 kg. It offers a speed range of 500 - 2500 rpm and features a touch function for convenience. The IKA Vortex 2 has dimensions of 120 x 140 x 138 mm and weighs 3.9 kg, with a motor rating input of 42 W and an output of 11 W.

Boekel 14458 Round Water Bath The Boekel 14458 Round Water Bath is manufactured from brushed stainle (more)ss steel for corrosion resistance. This bath is to be used with a heater. The Boekel 14458 Round Water Bath is supplied with 7 concentric rings for configurability and has a diameter of 20 cm (8"), and depth of 7 cm (2-3/4"). INCLUDED: The Boekel 14458 Round Water Bath includes: - 7 Concentric Rings - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty