Radwag H315.4.600/1500.H9 Stainless Steel Platform Scale

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-21726 NTC auto Cylinder change over unit ITEM-21717 Hi Lo 300 bar InletITEM-21719 Freshford 300 bar Inet ITEM-21730 ALA Scientific Valve Commander ITEM-28014 Chemical Spill Kit ITEM-28015 Chemical Spill kit ITEM-28013 Box of Polythene heavy duty bags 150 x 200mmITEM-30114 1,000 ml volumetric flasks ITEM-30115 1,000 ml volumetric flasks ITEM-30112 Box of miScript miRNA PCR arrays ITEM-25739 Imperial Saucepan ITEM-25696 2x Ribbon Cables (parcel) ITEM-25692 Huntingdon Animal Blood Pressure Monitor ITEM-25700 2x Denley Aluminium vial stands ITEM-28026 Jencons Heated Stirrer ITEM-25695 Mini Centrifuge Rotor Lid ITEM-28007 Adjustable microscope stage centre ITEM-25743 CamLab UV Lamp CAMAGITEM-25712 Olympus Highlight 3100ITEM-27671 Carl Zeiss Mixed Parts ITEM-28025 Greiner Bio one box 9pks of 10. 384 well microplates small VolITEM-25701 HPLC Blockheater w/ manual ITEM-25690 Watson A.C. Volt Gauge ITEM-25747 Box of 3 prong retort clampsITEM-25706 Waste containerITEM-27660 Laboratory StandITEM-28021 Spillage Absorption kitITEM-28020 Spillage Absorption kit ITEM-28019 Spillage absorption kit ITEM-28018 Spillage absorption granulesITEM-28022 STEM Corp Block HeaterITEM-28024 Jencons Light boxITEM-27666 Heat Resistant Stove Glass & accessories ITEM-25717 Olympus Light sourceITEM-25713 Olympus Highlight 3100 ITEM-27662 Mixed Glass & accessories ITEM-25738 Helena Electrophoresis GEL Tank ITEM-27379 3 bits of GlasswareITEM-25697 Box of HPLC Misc bitsITEM-25709 Kinetrol 1/4 turn ActuatorITEM-25736 Red Desk LampITEM-25684 4x Beckman Coulter Centrifuge bucket lids ITEM-25704 5x Beckman Coulter plastic compartments ITEM-27673 Bio Rad Econo RecorderITEM-28027 Spill Kit ITEM-27380 Box of small glasswareITEM-30090 Image Transfer FoilingITEM-30104 Bosch Interferenz 5 ITEM-30106 T8 240V/20W UV blacklight ITEM-30096 Toshiba DVD player ITEM-30102 EMS Combination 850ITEM-30098 Bio Rad Variable Speed PumpITEM-30077 ScotLab Electrophoresis Power Supply SL-3656 ITEM-30101 Bio Rad Model 200/2.0 Power Supply ITEM-30093 EMS Suction Unit ITEM-30085 Life Tech vertical electrophoresis apparatusITEM-30087 Charles Austen DA7C PumpITEM-30078 Koch-Light LTD electrophoresis tankITEM-30105 Samsung 32" monitor ITEM-30100 Huntleigh Flowtron Plus ITEM-30095 EMS HI-Q applicator & wires ITEM-30091 IKA MS2 Minishaker ITEM-30099 Bio Rad Variable Speed Pump ITEM-30103 MIE transducer controller ITEM-30097 Unknown metal components ITEM-30094 Biofeedback EMG100 ITEM-30086 Bio Rad Gel Dryer 583 ITEM-30092 Bowens mosaic limelite ITEM-30088 Edwards thermocouple 507 ITEM-27907 Vickers Instruments Microscope ITEM-27913 Vickers Instruments Microscope ITEM-27912 Vickers Instruments Microscope ITEM-27911 Vickers Instruments Microscope ITEM-27910 Vickers Instruments Microscope ITEM-27909 Vickers Instruments Microscope ITEM-27908 Vickers Instruments Microscope ITEM-30040 Unbranded Microscope ITEM-30144 Glass vials ITEM-30039 Leybold Didactic Microscope ITEM-30035 Leybold Didactic Microscope ITEM-30038 Leybold Didactic MicroscopeITEM-30037 Leybold Didactic Microscope ITEM-30042 Unbranded Microscope ITEM-26095 Techne MCS-104S ITEM-30081 Whatman thin layer chromatography plates