Radwag CY10.300.C3.K.M3 Multifunctional Scale

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error. With the Palm RoboSoftware V4 we can control the following microscope features: - Stage Y Axis movement - Stage X Axis movement - Objective Motor (able to select objective) - Increase/Decrease Light - Change Light Source - Raise/Lower Objective It is in excellent cosmetic condition with minor marks. Included are the following; Carl Zeiss Axiovert 200MModel: Axiovert 200MSerial#: 3820005950Objectives fitted:Zeiss Fluar 5x/0.25Zeiss Fluar 10x/0.50Zeiss LD Plan-Neoflaur 20x/0.40 CorrZeiss LD Plan-Neoflaur 40x/0.60 CorrZeiss EC Plan-Neoflaur 63x/1.25 Oil M27Zeiss EC Plan-Neoflaur 100x/1,30 Oil Eyepieces:W-PL 10x/23 (Qty.2) P.A.L.M Microlaser Technologies Model: PALM CombiSystemSerial#: CSC-01010Date: 2007 Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, MouseModel: Celsius R630Serial#: YKFU009307 Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.PC has the following software installed:Palm RoboSoftware V4 Hitachi HV-D30 CameraModel: HV-D30PSerial#: 0675280 Laser Quantum LD3000 power supplyModel: ForteSerial#: 02165p                                                   Zeiss CryLaS FTSS 355-50Serial#: B594C279 Item powers on and is in full working order.Communicates with control panel and microscope. EXFO X-Cite Series 120Model: XE120-XLSerial#: 0570 Item is in good cosmetic condition.Item powers on with light source in full working order. All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.Measurements and weight of Melles Griot Optical Table are as follows:Dx120Wx90Hx77cmWeight: Additional Parts & Accessories: Zeiss AdhesiveCap 500 ClearPALM MembraneSlidesPALM CombiSystem C User ManualsPALM DishHolder 50 CPALM MultiCap Insert 8cPALM MultiCap Collector D 8C (Qty.2)PALM CollectorSet SingleTube II 500PALM CombiSystem User manual (Qty.2)PALM RoboSoftware Software Guide (Qty.2)Laser Quantum Forte Operating ManualPALM MicroBeam Technical InformationZeiss Axiovert 200 Operating ManualZeiss DuplexDish 50 Sterile Packed (Qty.6)LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)Zeiss MembraneSlide 1.0 PenX-Cite In Control Series 120 User's GuideZeiss PALM RoboSoftware CDPALM MicroLaser System RoboSoftware 4.0 CDFujitsu Siemens Product Recovery CDCarl Zeiss 29 Software Release 4.6Zeiss Axiovert 200 M/Mat Floppy Disc3-CCD Color Camera Model HV-D30 Operating ManualFujitsu Siemens Celsius Drivers & Utilities CDScenview B17-2 CI / B19-2 CI

Yamato GLD-137CC, 115V Rotary Vane Pump with Rubber Hose Kit, 115V Ultimate Pressure 6.7 x 10-3 mb (more)ar Actual Pumping Speed 135 L/min (50Hz) 162 L/min (60Hz) Weight 27 kg Features - Voltage: 115V - Actual pumping speed (CFM): 5.72 - High performance, low vibration, and noise - Oil-back-flow prevention mechanism - Large-sized oil level gauge - Equips multi-voltage motor and corresponds to international standard Introducing the GLD Series Rotary Vane Pump, a high-performance and low-noise vacuum pump designed to excel in various applications. This pump boasts an array of impressive features, including a gas ballast valve, oil-back-flow prevention mechanism, and a generously sized oil level gauge. With its multi-voltage motor and adherence to international standards, it ensures versatility and compatibility across different setups. Perfectly suited for applications in the fields of chemistry, scientific experimentation, analyzers, and laser systems, this pump also excels as a backing pump for electronic microscopes, semiconductor equipment, sputtering and vacuum evaporation equipment, as well as vacuum and freeze dryers. Plus, with a noise level of just 57 db(A) or less, it ensures a quiet and efficient operation. Experience superior performance and reliability with the GLD Series Rotary Vane Pump, your ideal choice for vacuum solutions.INCLUDED: The Yamato GLD-137CC, 115V Rotary Vane Pump with Rubber Hose Kit, 115V includes: - Hose Clamp - Rubber Hose ID: 16mm/1500mm - Hose Port Type Suction Pipe OD: 18mm x M20 - 50mm Square Adapter for Suction Port - Oil Mist Trap - Power Cord - One Year Manufacturer's Warranty