Radwag WPY 6/15.F1.K.PGC Scale

Remarkable Throughput, Versatility of Applications Food industry? Pharmaceutical industry? Cosmetic  (more)industry? Three questions and one answer only: DWM checkweighers. These multifunctional devices have MID certificate, proving conformity with regulations on measures and weighing instruments used in all the aforementioned branches of industry. A Walking Ideal Checkweighers are based on an electromagnetic mass converter which is a guarantee for speed and accuracy of the measurement. High resistance to overload means failure free operation, and your peaceful mind. Do Not Set the Expectation Bar Low – This Device Will Adapt to Your Requirements Checkweighers, due to their modular design, meet the requirements of any production line. A complete set of shields, rejecters, sensors, signalling and monitoring modules will come up to expectations of every single customer, and a vast range of transport solutions will allow one to adapt the device to the requirements of a particular product. Convenience of Operation Touch screen terminal, HIM, with multi-language menu, is more than just fast and easy access to all control and static functions of the device. It is also pure pleasure. Take up the Challenges of the Future ICommunication interfaces like Ethernet, Ethernet IP, Profinet, Profibus and access to the database system are the response to the requirements of Industry 4.0 concept. We have equipped our scales with a special package of dedicated functions, like an extended access control module, and complete archiving of all scale states in the Audit Trail module. Thanks to this, all pharmaceutical processes you carry out are safe and accordant with GMP, and FDA 21 Part 11 requirements. Complete Validation: IO, OQ and PQ In order to be able to install any measuring device in the pharmaceutical industry you need validation. A special equipment qualification package will guarantee a complete, documented validation for your checkweigher: Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ) – we provide all these. Proved Effectiveness With the special OEE module in E2R software, you can control the utilization rate of your machines and equipment.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The RMC 2.5Y.FC filter robot is a professional-class measuring device ensuring full automation of fi (more)lter mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and readability of d= 1 µg. The device enables weighing up to 156 filters. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status, record and report of data. Advantages: Compliance with EN 12341:2014 standard Less time consuming when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter Increased pressure in the chamber prevents contamination The RMC 2.5Y.FC filter robot comprises: a six-position reference magazine for storing mass standards and reference filters; a robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; a microbalance with a draft shield; an ionizing system; an air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; ambient conditions monitoring (temperature, humidity, pressure); a weighing indicator for managing of the device operation; an integrated QR code reader; a QR code printer; a PC with the RMCS Filter software for managing the device operation; a control and adjustment systems; an external air conditioning unit.

With the Topitec Automatic, you have the option of carrying out and storing various mixing processes (more). There are 99 memory locations available for this purpose. With low-air processing through the adapted mixing height in formulation production and an optional connection to your pharmacy PC, this all-rounder closes the gap between formulation and QMS.