Radwag WPY 3/6.F1.K.PGC Scale

This Sacher Lasertechnik Lasertex Laser System was removed from a university lab where it was surplu (more)s to requirements. The control unit does not power on so we were unable to test the laser. There is no key with it.  We think this is how it is activated and likely why it won't power up. It comes with a control unit to laser cable and 2 cables for computer connection. There is also a box labelled 'Security Check Box' with 2 pieces inside. Both units are in good, used cosmetic condition. Control UnitModel - MLD1000 LaserModel - TEC500

The unit was removed from a university lab. It has not been tested at our facility. This job lot of  (more)items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; Enraf Nonius Goniometer Control UnitType 0590.821Serial No. 042 Enraf Nonius main processing unitType 1546.801Serial No. 19-19 Jobin Yvon Horiba PC without HDD Bruker Nonius X-Ray ControlType 1590.830Serial 24-04 Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head Enraf Nonius Pocket TerminalSerial No. 69786R 2 x Huber mechanical adjusting blocksPart Nos. D83253 D8219 4 x Software disks Cad4- PC Software V1.5c 3.5 Connecting cables and data leads

Mechanical Design Compliant with HACCP DWM HPX checkweigher is designed in accordance with ‚hy (more)gienic design’ requirements. Adoped solutions minimize potential spots where contamination can accumulate, and facilitate maintenance. Among these solutions there are: round-profile construction, no places accumulating contamination, fast disassembly of conveyors and belts requiring no tools, less flat horizontal surfaces on which contamination may accumulate, stainless steel mechanical design (AISI 304 or 316). Specially-designed gaskets, seal wires and shields guarantee IP69K ingress protection. Intended Use This series of checkweighers is intended for food industry, it is especially useful on fish and meat processing production halls. The applied solutions and materials are compliant with strict hygiene standards required for food production. Reinforced, hermetic construction allows to clean the device with pressure washer. Measurement Speed and Precision Mass measurement using DWM HPX checkweigher is carried out with up to 0.5 g readability, on an electromagnetic weighing module housed in a hermetic housing of IP69K ingress protection. Clear Information Layout The 12” display with a touch panel enables easy access to the main functions and clear presentation of the most important information during operation, e.g. current mass value, current statistics, production line throughput and function buttons. Databases The DWM checkweigher features an SQL database. The database stores lists of products, operators and measurement reports. Connectivity with Central Database System E2R software enables synchronization of local databases of particular weighing instruments with a central database. With this, it is possible to preview and manage data from the weighing system administrator’s computer. Compliance with Global Standards DWM HPX checkweighers have type approval certification compliant with the MID directive, and have passed tests carried out in accordance with OIML R51. The checkweigher software enables creation of different permission levels for operators, and registers operations carried out on the scale along with possible operator errors. Compliance with 21 CFR Part 11. The following functions are available to ensure compliance with the regulation: 10 permission levels for operators to be defined by the administrator, requirements for each operator's passwords (determined by the administrator: minimum length, upper-case letters and digits quantity, special signs quantity), the requirement to enter new password at first logging (the first password is entered by the administrator creating the account), determination of password validity period in days automatic logout after a specified time of inactivity operator lockout after 3 incorrect login operations; lockout time specified, unlimited account lockout after 6 incorrect login operations; the account can be unlocked by the administrator saving changes to Audit Trail file; detailed reports on all modifications carried out on the checkweigher (information on parameters modifications including previous and new values), adding information about modification reason. This applies to all operational parameters of the checkweigher, e.g. conveyors speed, enabling/disabling ejector, ejector settings modification, checkweigher start/stop, logging and data contained in all products, operators, weighings and reports databases. All login, start, stop operations and report generating are recorded.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

This listing is for a Hanna HI 93728 Nitrate-Nitrogen Photometer.The unit is in full working conditi (more)on and is ready for immediate release.Overview of Nitrates and Measurement ImportanceNitrates are naturally occurring compounds produced from the decomposition of organic matter or from fertilizers. However, they can be converted to nitrites, which pose health risks.Guidelines for Nitrate Levels:Global Maximum: 45 mg/L for nitrates in water.Europe: 50 mg/L for potable water.USA (EPA): 10 mg/L for nitrate nitrogen (NO₃-N), which equates to 45 mg/L of nitrates.HANNA® HI 93728 and HI 93828 MetersThese handheld meters are designed for field measurements of nitrate levels with ease and accuracy.Key Features:HI 93728 Meter:Measures nitrogen nitrate from 0 to 30 mg/L (NO₃-N).To convert to nitrate concentration, multiply the reading by 4.43, allowing a maximum reading of up to 133 mg/L of nitrate (NO₃).Measurement Range:0.0 to 30.0 mg/L (NO₃-N)Resolution:0.1 mg/LAccuracy:±0.5 mg/L ±10% of readingLight Source:LED at 555 nmLight Detection:Silicon PhotocellBattery Type/Life:1 x 9V with approximately 40 hours of continuous use.Operating Environment:0 to 50°C (32 to 122°F); RH max 95% non-condensingDimensions:180 x 83 x 46 mm (7.1 x 3.3 x 1.8 inches)Weight:290 g (10 oz.)Method:Adaptation of the cadmium reaction method, producing an amber tint in the sample upon reaction with nitrate-nitrogen.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Polyscience AD06S150-A11B 6L Stainless Steel Open Bath, Advanced Digital (Ambient +10 to 150C), 120V (more), 60HzThe Polyscience AD06S150-A11B 6L Stainless Steel Open Bath is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD06S150-A11B 6L Stainless Steel Open Bath, Advanced Digital (Ambient +10 to 150C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty