Radwag WPY 1,5/3.D2.PGC Scale

Mechanical Design Compliant with HACCP DWM HPX checkweigher is designed in accordance with ‚hy (more)gienic design’ requirements. Adoped solutions minimize potential spots where contamination can accumulate, and facilitate maintenance. Among these solutions there are: round-profile construction, no places accumulating contamination, fast disassembly of conveyors and belts requiring no tools, less flat horizontal surfaces on which contamination may accumulate, stainless steel mechanical design (AISI 304 or 316). Specially-designed gaskets, seal wires and shields guarantee IP69K ingress protection. Intended Use This series of checkweighers is intended for food industry, it is especially useful on fish and meat processing production halls. The applied solutions and materials are compliant with strict hygiene standards required for food production. Reinforced, hermetic construction allows to clean the device with pressure washer. Measurement Speed and Precision Mass measurement using DWM HPX checkweigher is carried out with up to 0.5 g readability, on an electromagnetic weighing module housed in a hermetic housing of IP69K ingress protection. Clear Information Layout The 12” display with a touch panel enables easy access to the main functions and clear presentation of the most important information during operation, e.g. current mass value, current statistics, production line throughput and function buttons. Databases The DWM checkweigher features an SQL database. The database stores lists of products, operators and measurement reports. Connectivity with Central Database System E2R software enables synchronization of local databases of particular weighing instruments with a central database. With this, it is possible to preview and manage data from the weighing system administrator’s computer. Compliance with Global Standards DWM HPX checkweighers have type approval certification compliant with the MID directive, and have passed tests carried out in accordance with OIML R51. The checkweigher software enables creation of different permission levels for operators, and registers operations carried out on the scale along with possible operator errors. Compliance with 21 CFR Part 11. The following functions are available to ensure compliance with the regulation: 10 permission levels for operators to be defined by the administrator, requirements for each operator's passwords (determined by the administrator: minimum length, upper-case letters and digits quantity, special signs quantity), the requirement to enter new password at first logging (the first password is entered by the administrator creating the account), determination of password validity period in days automatic logout after a specified time of inactivity operator lockout after 3 incorrect login operations; lockout time specified, unlimited account lockout after 6 incorrect login operations; the account can be unlocked by the administrator saving changes to Audit Trail file; detailed reports on all modifications carried out on the checkweigher (information on parameters modifications including previous and new values), adding information about modification reason. This applies to all operational parameters of the checkweigher, e.g. conveyors speed, enabling/disabling ejector, ejector settings modification, checkweigher start/stop, logging and data contained in all products, operators, weighings and reports databases. All login, start, stop operations and report generating are recorded.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C.) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

Wheaton 6-Tier Roller Apparatus Cat No 348970CE This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver. It is in good cosmetic condition with minor marks

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Witec WCB-11 digital precision bath. Capacity 11 L. Temperature range from ambient +5°C to 100°C. Ac (more)curacy ± 0.1 °C. Digital controls. Timer up to 99 h 59 min. Pumping 5 L/min. Stainless theft. Top. Bathtub effective space: 170*240*150 mm. Exterior dimensions: 335*275*385 mm. User manual. El baño de precisión digital Witec WCB-11 is Ideal for biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical,  industrial applications and connection with evaporators and viscometers.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW