Radwag HY10.3/6.H2.PGC Multifunctional Scale

This Sacher Lasertechnik Lasertex Laser System was removed from a university lab where it was surplu (more)s to requirements. The control unit does not power on so we were unable to test the laser. There is no key with it.  We think this is how it is activated and likely why it won't power up. It comes with a control unit to laser cable and 2 cables for computer connection. There is also a box labelled 'Security Check Box' with 2 pieces inside. Both units are in good, used cosmetic condition. Control UnitModel - MLD1000 LaserModel - TEC500

Automatic rotational scales is designed for operation in technological lines of cylindrical packaged (more) goods, like aerosols, sprays, glass and plastic bottles, etc. Control unit is based on Windows Embedded software and SQL database server. Industrial computer is designed to operate in hard industrial conditions. Its cooperation with specially prepared Windows platform makes the system stable and allows for holding set parameters. Graphic and touch screen communication panel makes operation very easy and intuitive which has already been appreciated by users. Rotational device is not equipped with its own conveyor belt, it is mounted over an existing one, which significantly shortens and simplifies its installation. The scale is pneumatically powered. This provides high durability and reliability. Application: Rotational scales is intended to control cylindrically shaped single packages, like aerosol, with diameter 35- 66mm*. System operates in accordance with regulation on Control of Prepacked Goods. Main application: · Chemical industry, · Pharmaceutical industry, · Distilling industry, · Food processing industry. * it is possible to weigh containters with other diameter Functions Rotational scales provide 100 % control of goods transported on the processing line. Goods that do not meet set thresholds are discriminated from the line. Control of goods in accordance with regulation on Control of Packaged Goods, Acquiring data on controlled goods, Definable access levels for scale users, Discrimination of defective goods by weight, Extended statistics conducted in real time, Built-in line performance meter, Reports generated automatically in accordance with the weighing mode, Export of reports to PDF files, Cooperation with other devices in a processing line, Remote start and stop function, Detection of line congestion, Detection of empty line, Cooperation with computer software. Basic technical data Industrial Windows Embedded system, Industrial computer designed for operation in hard conditions, Graphic touch screen, Databases applying SQL servers, Interfaces and ports: RS232, USB and Profibus, Ethernet, Controlling - informative outputs control, IP55 or IP65 Cooperation with peripheral devices Rotational scale is prepared to cooperate with peripheral devices, and devices form a processing line. I/O set provides broad configuration possibilities and full integration of the scale with an existing processing line. Cooperation with dosing device with feedback, Cooperation with barcode scanner, Printouts on receipt printers, Remote control , Keeping records from weighing on a computer. Implementation options: Separate discriminating set for "too light" and "too heavy" goods, Sounder and/or Warning tower lights, Cooperation with printers and label printers, Two USB ports, Profibus and Modbus interface support, Weighing record application.

DWM H2 checkweigher assures the highest quality and accuracy of weighing. It is intended for integra (more)tion with multi-track packaging machines transporting products to the line using several parallel tracks. It is possible to integrate the DWM H2 checkweigher in systems which due to the required throughput demand use of multiple checkweighers. The scale is equipped with multiple tracks integrated into one construction, the tracks are operated via one operation panel. Each of the weighing tracks is an independent measuring system equipped with a weighing module and rejecters. The weighing tracks are placed next to each other. With this, products can be picked up directly from the packaging machine. Multi-track scale throughput: tracks quantity x single track throughput of 500 pcs Integrated electronics speed up determination of settings, facilitate operation and enable generating single report for a production batch. The device features user-friendly and intuitive interface, integrated functions facilitating operation and statistics record. The scale enables precise control of pre-packaged goods in accordance with the PGC Regulation. The complex communication modules ensure full integration of the scale with production line allowing for unattended operation of the device. Connecting the scale to an IT system enables online preview of the production process, record of weighings, and generating reports providing information on weighing statistics, quantity statistics, shutdown and line malfunction. DWM H2 scale is intended for control of a single load of mass up to 7500 g (depending on the model). Scale's software enables products control to be carried out either in accordance with user requirements or the Pre-Packaged Goods Control Regulation. A 'flexible limits' module is especially intended for pharmaceutical plants. The devices feature PZH food approval certificate. Area of use: Pre-packaged goods control accordant with the regulation; Comprehensive automatic control of the production process; Supervision over dosing equipment; Verification of product packaging correctness; Weighing drugs, blisters, syrups, etc. Features: Static weighing; Checkweighing; Database of operators with various permissions; Products database; Weighings database; Reports database; +/- control; Pre-packaged goods control mode according to the regulation; Pre-packaged goods control mode according to user requirements; Autodiagnostics; Automatic correction of packaging mass; Verification of rejecter operation; Pressure control of the power supply installation; Bin overload sensor; Integration with feeders; Compatibility with PLCs; Reports; Reports export to PDF files; Control of products transport; Product dimensions control; Smooth regulation of conveyors speed;. Software The scale is equipped with industry computer and Windows Embedded operating system. With such a solution, interaction of the operator and the device is intuitive and uncomplicated. The database module is based on Microsoft SQL Server, which guarantees stable and secure record of data generated by the scale and easy connection of the database with customer's IT system. Protection of data and weighing records is carried out by means of simultaneous record on two separate storage media. All driver elements of the scale, such as drives, rejecters, emergency buttons, signalling devices are supervised by the real-time computing (RTC) guaranteeing fault-free operation and immediate reaction to incoming control system signals. Checkweigher enables data exchange via Ethernet network. Implemented communication protocol facilitates automatic sending of weighing records, databases update, determining weighing settings and visualization of the checkweigher online operation. Models: Separate rejecters for 'too light' and 'too heavy' products, Rejecter in a form of a swing conveyor, Optical and acoustic signalling device, Feeder operation in the feedback system, Printers and labeller operation, Two USB ports, Profibus operation, Program for weighings archiving. For more information, please contact us: phone +48 48 38 66 234 or e-mail: [email protected]

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Unused demo product in original packaging. Great condition. 12 months warranty. For: - Hei-Tec - Hei (more)-Connect - Hei-End - Hei-PLATE Mix 'n' Heat Core

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 500 g), plastic box Number o (more)f pieces in the set: 12

Frame intended for 4-load-cell powder-coated scales C7, that are to be embedded in the ground.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).