Refracto 30PX portable refractometer METTLER TOLEDO

BELLINGHAM + STANLEY Automatic Refractometer RFM840 Model: RFM 840 - 26-840 - benchtop refractometer (more) Series: RFM 800 RI scales: 1.32 - 1.58 Sugar (°Brix): 0-100 RI Resolution: 0.00001 Resolution °Brix: 0.01 Presser type: Polyacetyl Other scales: Zeiss, Oechsle (CH) & (D), Babo (KMW), Baumé, Probable Alcohol (A.P.), Sodium Chloride (NaCl), HFCS (42, 55 & 90%), Butyro among others from the instrument library Measuring temperature range: Lower limit: 0°C or 10°C below ambient temperature, whichever is higher Upper limit: approximately 100°C Temperature sensor accuracy ±0.03°C Temperature stability ± 0.05 °C Delivered without standard solution

ATAGO SUR-NE Clinical Refractometer Never Used Equipment SUR-NE is designed for clinical application (more)s: "Serum Protein", "Urine Specific Gravity" and "Refractive Index". Specifications: Range: Urine Specific Gravity: 1000 to 1060 Whey Protein: 0.0 to 12.0g/100ml Refractive Index: nD 1.3330 to 1.3660 Minimum Range: Urine Specific Gravity: 0.001 Whey Protein: 0.2g/100ml Refractive Index: nD 0.0005 Size and Weight: 4x4x18cm, 170g

Differential refractometer WATERS 410 HPLC The 410 is a differential refractive index detector desig (more)ned for high performance liquid chromatography applications. It can operate as stand-alone unit with an integrator or chart recorder, or with a system controller or data system. The 410 functions with solvents with refractive indices between 1.00 and 1.75. The measurement range of the instrument is 5×10(-8) to 5×10(-3) refractive index units (RIU) full scale. Flow rate: 0.3…10 ml/min. Housing (D)x(H)x(W): 49 x 23 x 28,6 cm. Unit powers up as shown in pictures. Equipment not tested

As-is

This Waters 410 Differential Refractometer was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

Leica DMLB Fluorescence Microscope + Glass Refractive Index Measurement System with Software This sy (more)stem was removed from a university lab where it was surplus to requirements. The units powered on successfully, both individually and as a system. The microscope is producing a clear image, and all moving parts are functional. The camera is also displaying a live image on the Hitachi monitor. Included Components:- Leica DMLB Microscope (Model: 020-519.011 DMLB) - 1 x Leica C Plan 10x/0.22 PH1 (506078) - HP Vectra PC - Monitor - Foster + Freeman Grim 2 (S/N: NL11322027) - Keyboard - Hitachi VM920K Monitor (S/N: 0059133) - Mettler Toledo FP82HT Hot Stage (Note: unable to heat) - Instruction manual

The uScopeMXII digital microscope produces high-quality images while allowing you to scan a region o (more)f interest. This digital workhorse offers unprecedented capability in a form factor ideal for desktop PC users. A little larger than an external hard drive, the uScopeMXII delivers high-resolution digital images from standard glass slides. Illumination: LED (White) Camera Resolution: 960×540 Field Image Format: JPEG, PNG (lossless) Scanned Image Capture: Single Field, Tiled Fields, Overlapped Fields, Underlapped Fields Viewing Formats: Single Field, Tiled Fields, Deep Zoom Image Export Formats: JPG, BMP, PNG, TIFF

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

KNF IP65 FEM 1.02 ST.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards T-Station 300D Dry Turbo Station ISO100, 100-120V Ultimate Pressure 6×10⁻⁸ mbar Inlet Connec (more)tion DN 100 ISO-K Leak Tightness <1x106 mbar l/s Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer - Simple user-friendly plug and pump solution with no systemization and no additional air cooling required Edwards T-Station 300 turbomolecular pumping station buildson the existing popular T-Station 85 platform by replacing the nEXT85Hturbomolecular pump with the nEXT300 turbomolecular pump we have extended ourportfolio and are providing a solution for customers and applications that requirea higher pumping speed up to 300 ls-1. Click Here to View Product Video INCLUDED: The Edwards T-Station 300D Dry Turbo Station ISO100, 100-120V includes: - T-Station Pumping Station Base - XDD1 Diaphragm Pump - nEXT300D Turbomolecular Pump with ISO100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty