Radwag UMA 5.5Y Automatic Mass Comparator

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

An additional anti-draft chamber dedicated for mass comparator APP.64.5Y.KO. It is intended for inst (more)ruments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.

The new RMC.10000.5Y robotic mass comparator guarantees the utmost repeatability within 1 kg - 10 kg (more) range with the readability of 0,01 mg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 10000.5Y mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The new RMC 10000.5Y mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 10 positions. The RMC 10000.5Y enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 10000.5Y mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Ejectable mass standards magazine For the user's convenience, the magazine slides out of the robot's footprint at the time of arming and allows weights to be applied very easily, then positions itself automatically when retracted. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Microscope trinocular Delphi-X Observer DX.1153-PLi eyepieces SWF 10x / 25 mm Ø 30 mm lenses with a  (more)correction to infinite (IOS) plane achromatic PLi 4/10/20 / S40 / S100x oil immersion, 60 mm parafocal, plate 190 x 152 mm with mechanical stage built-in x 78 x 32 mm and 3 W of lighting NeoLED ™ SPECIFICATIONS EYE • Super wide field SWF10x/25 mm for the porta-eye Ø 30 mm HEAD Trinocular design Siedentopf tube inclined at 30°. Distance inter-pupillary adjustable between 47 and 78 mm head trinocular standard has a selector of the optical path of three positions (100:0 / 80:20 / 0:100). Correction ± 5 diopters in both eyepieces. REVOLVER HOLDER OBJECTIVES Revolver holder objectives sextuple oriented towards the interior and are mounted on ball bearings of high precision. With screw thread for objectives of 25 mm diameter OBJECTIVES PLANE ACHROMATIC The Delphi-X Observer ™ comes standard with the objectives of the EIS corrected infinity Plane achromatic 4x / 0.10, 10x / 0.25, 20x / 0.40, S40x / 0.65 and S100x / 1.25 oil-immersion APPROACH Approach macro and micrometric coaxial, 100 graduations, accuracy of 1 μm, 100 μm by the rotation, the range of total displacement of about 35 mm Is supplied with a top elevation of the plate adjustable to prevent damage to the sample and the objectives. The focus system coarse has tension adjustment. The focus knobs micrométricos can be changed from left to right (for a magnetic system) in accordance with the preferences of the user STAGE Plate 190 x 152 mm with mechanical stage mechanical integrated right 78 x 32 mm With coating glass-Gorilla resistant to scratches. Stage mechanical for left-handed available upon request (Reference request: Add -L to the product number) CAPACITOR Abbe condenser with tiltable lens A. N. 0.90/1.25 with identification marks of the numerical aperture. Adjustable in height. Iris diaphragm HIGHLIGHTS DIASCÓPICAS • Type-Köhler-intensity adjustable by NeoLED™ 3W with internal power supply 100-240 V NeoLED™ The innovative design NeoLED™ is a combination of LED and custom lens thin specially designed with a short focal length to obtain three main benefits: • You can capture more oblique light from the LED light source, which significantly increases the light output • It requires less energy to reach this level of intensity of light • The greater opening of NeoLED™ allows the optical systems of the microscope to produce images with higher resolutions, very close to the diffraction limit of theoretical optics SENSOR ICARE This sensor allows to avoid the loss of unnecessary energy. The illumination of the microscope automatically switches off shortly after the user stops in front of the microscope CARRY HANDLE The carry handle on the back of the microscope guarantees a safe transportation of the microscope and the tool and the porta-tools integrated to ensure that the right tool is always available PACKAGING Supplied with power cable, protective cover, replacement fuse, user manual and small bottle of immersion oil 5 ml. Case of polystyrene

Ohaus SHRK04DG Rocking ShakerThe OhausSHRK04DG Digital Rocking Shaker is ideal for cell culture work (more) and is designedto be used in a variety of environmental conditions.The SHRK04DGis designed for use in a range of lab applications in a variety ofenvironmental conditions. Rocking Shakers provide a seesaw-like motion. Themicroprocessor-controlled digital models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows for electronic tilt angle adjustment in 1° increments for tiltand 1 rpm for speed.Digitalmodels are equipped with LED displays and touchpad controls for speed, tiltangle and time. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHRK04DG Rocking Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner The Crest Ultrasonics Perforated Ba (more)sket for P1800 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner is 19" in length x 10.75" in width x 5" in depth and is for use with the P1800 Ultrasonic Cleaners. The Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.