Radwag AKM-2.50.5Y Automatic Mass Comparators

This listing is for a NNP 50+100g Weight. The unit is in full working condition and is ready for im (more)mediate release.

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.

RS 232 cable for connecting a balance/scale (PUE C/31 terminal) to an Epson printer. Standard cable  (more)length: 1,7m. Compatible with: - Scales operated by means of PUE C31 terminal - Scales operated by means of PUE 7.1 terminal - PUE C31 terminal - PUE 7.1 terminal

INTENDED USE THB-R PC software is designed to monitor and register indoor ambient conditions, wherei (more)n the said monitoring is based on data collected by measuring devices of Radwag production. Two THB software versions are offered: THB-R-Single – intended for integration with THB-3/2 ambient conditions module, THB-R-Multi – intended for integration with THB-R ambient conditions recorder. Overview THB-R PC software is responsible for establishing communication with measuring devices. It operates as a user interface intended for collected data presentation, archiving, reporting and for carrying out measuring devices setup. The software carries out constant readout of air temperature, relative air humidity, atmospheric pressure and vibrations. Additionally it calculates air density. Current metrological parameters values are demonstrated in a form of a time diagram, wherein the last 5 minutes are presented. The measurements may also be archived in a local database, MS Access format. The record takes place in a specified time interval. Database files are formed using one of four user-defined methods: daily, weekly, monthly, combination of all. THB-R-Multi version of the PC software enables record of measurements collected by THB-R Ambient Conditions Recorder. The stored data may be previewed and printed in a form of reports and diagrams. THB-R installation package comprises THB-Network Viewer allowing local network users to preview current indications of measuring units. Cooperation with measuring devices The software cooperates with measuring devices such as ambient conditions modules of RADWAG production. The modules are intended for operation with THB-R-Single or THB-R-Multi software version. Depending on the used device, communication between the software and the device may be established via RS 232 or USB interface. The latest software versions: THB-R-Single: v. 4.0.2 THB-R-Multi: v. 5.2.0.3

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 10 μg for loads ranging from 2 g to 50 kg.

EVA 180B LBX Rotary Evaporator New equipment (never used) Laboratory rotavapor with vertical glasswa (more)re Manual lift Certifications: DIN EN 60529 Max. Temperature (metric): ambient to 180°C Speed ​​20 to 200 rpm Bath volume: 5L (for Oil and water) Electrical requirements: 230 V/50/60 Hz Dimensions (L x W x H): 440 x 320 x 450 mm Weight (Metric): 10kg LED display

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Ccell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 180 x 405 x 94 mm Gel tray sizes (OD) (WxL): 100 x 150 mm, 150 x 150 mm ReadyAgarose gels accommodated: No Sample throughput: 1 – 120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~30 mm/hr (at 75 V) This electrophoresis power supply is recommended for basic applications such as submerged horizontal and mini vertical gel electrophoresis. It offers timer control and constant-voltage or constant-current output. Output range (programmable): 10 – 300 V, fully adjustable in 1 V steps 4 – 400 mA, fully adjustable in 1 mA steps 75 W (maximum) Type of output: Constant voltage or constant current with automatic crossover Output terminals: 4 pair recessed banana jacks in parallel Timer: 1 min – 99 hr 59 min, fully adjustable Pause/resume function: Yes Safety features: No-load detection, sudden load change detection, overload/short-circuit detection, overvoltage protection Input protection: Fuse on both hot and neutral Dimensions (WxLxH): 210 x 245 x 65 mm Weight: 1.1 kg

Dimensions (W x D x H): 260 × 390 × 100 mm

BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000 This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz