pHmetro SevenGo Duo pH/Cond SG23-EL-Kit METTLER TOLEDO

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immidate realese. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

Double measurements everywhere. Designed so that the single press of a button triggers a calibration (more), measurement or review of the stored data. Intelligent Sensor Management (ISM®) ISM® leaves nothing to chance! Calibration data and history are stored in the sensor and automatically transferred upon connection to the instrument. ISM® meter and sensors - a great match The electrode kit contains the instrument and two ISM® sensors. You can benefit from its free features immediately! Specifications - SevenGo Duo pH / Cond meter SG23-EL-Kit Parameter: pH; Conductivity; ORP Channel: Double channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM; InLab 738-ISM PH measuring range: 0 - 14 PH resolution: 0.01 Accuracy pH (±): 0.01 Measurement range (2): 0.1µS / cm - 500mS / cm Conductivity resolution: 0.01 ... 1 Conductivity accuracy (±): 0.5% Measurement range mV 0 Resolution mV: 1 Accuracy mV (±) 1 Temperature range (2): -5 ° C...105°C Temperature resolution: 0.1°C Temperature accuracy (±) pH: ± 0.5 / Cond: ± 0.2 Portable: Yes Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 99 measurements Degree of protection: Watertight and dustproof (IP67) Languages  English Memory size  99 measurements Meter Type  Portable Dual-Channel mV measuring range  -1999..1999 mV

Conductivity measuring range: 0.01 μS/cm to 500 mS/cm Conductivity resolution: 0.01 – 1 Conductivity (more) accuracy: ±0.5 % Temperature Range: -5°C to 105°C Temperature resolution: 0.1°C Temperature accuracy: ±0.3°C Memory size: 200 measurements Data Transfer: PC, Printer Compatible with Intelligent sensor management (ISM): No Connectors: USB B, RS232, Mini-DIN Dimensions: 227 x 147 x 70 mm Weight: 0.63 kg

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Mettler Toledo FiveEasy F30 Conductivity Meter Lab This item was removed from a university where it  (more)was surplus to requirement. The Mettler Toledo FiveEasy F30 is brand new in its original packaging, with one additional part being opened as stated below. Included are: - Mettler Toledo FiveEasy F30 - Brand New. - LE Sensors Cat no. 51340335 - Opened/Excellent Condition. - The five series operating & installation instructions cd - Brand New. - 12V Power supply with adaptors - Brand New.

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

Suitable with API 4000, 4000 Qtrap, 3200, 3200 Qtrap, 5000, 5500, 5500 Qtrap.

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 The Eppendorf Plat (more)e Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are designed for use with the Eppendorf S-4-104 Swing Bucket Rotor. These plate buckets feature an aerosol-tight capable cap design (aerosol-tight caps not included), ensuring that samples remain safe and secure during centrifugation. With a maximum capacity of 4 microplates per bucket, 2 cell culture plates per bucket, or 1 deepwell plate per bucket, these plate buckets are ideal for a wide range of applications, including cell culture, protein purification, and nucleic acid isolation. The plate buckets' maximum speed of 3,900 RPM and maximum RCF of 2,568 x g make them capable of high-speed separations, while their 15.1 cm maximum radius ensures efficient sample processing. Overall, the Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are a valuable accessory for researchers and scientists who require efficient, safe, and reliable plate buckets for use within the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity4 x Microplates Per Bucket2 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius15.1 cmRotor CompatibilityEppendorf S-4-104 Swing Bucket Rotor