Thermo Spectronic Genesys 10 UV Spectrometer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HortiSpec+ equipped with a NR Lite2 Net Radiometer probe. The HortiSpec was developed to measure the (more) light intensity and spectral distribution in the visible and NIR range inside greenhouses. Plant growth and the photo synthesis depends very much on light intensisty and spectral distribution of the light intensity. The light intensity can be measured with the HortiSpec in Photons or other parameter, specific for the Horticulture. NR Lite2 is designed for routine measurement of net radiation which is the balance between incoming and outgoing radiation under outdoor conditions. The design of the NR Lite2 is unique. The double-sided detector has black conical absorbers with an anti-stick weather resistant protective coating. In contrast to other sensor designs, NR Lite2 requires no fragile plastic domes. This results in a virtually maintenance free design. The vertical stick prevents birds from affecting the output signal. Spectrometer: AvaSpec – 2048, CCD linear array 2048 pixels Grating VA, wavelength range (300 – 1100 nm) 200 µm slit, Detector collection lens, Order sorting coating Data communicaton: USB version 2.0, 480 mbps Aperture: Diffusor, diameter 3.9 mm Software: HortiSpec Irradiance software Measurement units: photon flux in µmol/s.m² Parameters: Lux, PAR, Blue, Yellow/Green, Red, Far red Specifications NR Lite2: Spectral range (overall): 0.2 to 100 µm Sensitivity: 10 µV/W/m² Response time: < 20 s Operational temperature range: -30 °C to +70 °C

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition with minor marks from use.

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use.

Varian SpectrAA 220Z Atomic Absorption Spectrometer &amp; Accessories This was removed from a univer (more)sity lab where it was surplus to requirements. Included are; Varian SpectrAA 220Z Atomic Absorption SpectrometerSN - EL01065204 Varian Graphite Tube AtomizerModel - GTA 110Z (100 Series)SN - EL0106407 Varian UltrAA Lamps 1 &amp; 2 Control ModuleSN - EL97063260Powers on Varian VGA 77SN - EL01114913Powers on Electrothermal Temperature Controller &amp; Cell Heater MK2Model - ETC060SN - 94029227Powers on and appears to be in working order with cell heater getting hot. Varian Sample DispenserSN - EL01064640 Applied Thermal Control ChillerPart no. KTD2000SN - 010385Powers on Hollow Cathode Lamps by brand:-Varian SpectAA Lamps:-MercuryArsenicCalcium/Magnesium/AluminiumCobalt/Chromium/Copper/Iron/Manganese/Nickel Varian UltrAA Lamps:-LeadSeleniumArsenicCobalt/Chromium/Copper/Iron/Manganese/NickelSilver/Cadmium/Lead/Zinc 12 x S&amp;J Juniper:-2 x Copper1 x Nickel1 x Tellurium1 x Maganese1 x Potassium1 x Lead1 x Zirconium1 x Cadmium1 x Zinc1 x Iron1 x Sodium 4 x Corning:-1 x Zinc1 x Cobalt1 x Potassium1 x Molybdenum 3 x Activion:-1 x Iron1 x Aluminium1 x Sodium 3 x Southern Spectral Sources:-2 x Neon1 x Argon ASL11 X Neon 6 x Varian Techtron:-MolybdenumTinCopperLeadNickelCadmium 1 x Southern Shandon Neon1 x Baird Atomic Neon2 x Neon Cathodeon1 x Rank Hilger Neon Box full of various small parts including tubing, cables and:-Varian Kit Mixer Paddles MK7 Qty 5Varian UV Lamp3 x Varian Kit MK7 Aqueous Spray Chamber O ringVarian Kit Neb Capillary for MK72 x Boxes of Glassware (99-1000400-00)Box of Kit spares &amp; tools (98-100239-00)Box of 2 Glass Parts (66-100082-00)Box of spares (02-101494-00)Yellow Cell Heater Temperature Sensor PN - 01-106549-90 Software/Discs:-SpectrAA Help &amp; VideosVarian PatchesVarian Atomic Spectroscopy PublicationsVarian Windows UpdateVarian SpectrAA Software BaseVarian SpectrAA Software ProVarian Basic Atomic Absorption Theory Manuals:-Varian SpectrAA Operation ManualVarian OSI Optical Spectroscopy Instruments Log BookVarian Atomic Absorption Maintenance GuideVarian Atomic Absorption Technical PresentationVarian Analytical MethodsVarian Techniques of Graphite Furnace AA Spectroscopy Course ManualVarian Analytical Methods for Graphite Tube AtomizersVarian AA Introducing Atomic Absorption AnalysisApplied Thermal Control Manual

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Working temperature range: 20 to 120°C Temperature stability: ±0.02K Pump pressure max: 0.4 bar Pump (more) flow max: 17 L/min Volume: 12 to 18 L Dimensions (WxDxH): 331 x 536 x 349 mm Bath opening (WxD): 300 x 365 mm Bath height: 150 mm Large LCD display for actual and set values, setting and display resolution of 0.1°C Easy input of set value for temperature and Vario pump via three function keys Automatic safety and warning function in case of low liquid level in the bath Overtemperature protection with automatic cut-out (safety class III, FL for operation with flammable liquids) Audible error alarm Malfunction indicator with automatic diagnosis Calibration and adjustment option

Milipore Steritest Compact In good condition

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Boekel Scientific 301200 Small Platelet Agitator The Boekel Scientific 301200 Small Platelet Agitato (more)r is designed for continuous quiet operation and to meet mixing requirements in the storage of platelets. For use with Boekel Scientific Platelet Incubator. Easy sliding and removable agitator shelves Rotation Failure alarm if not connected to Boekel Platelet Incubator Non-slide feet to alleviate unit walking on the bench as well as for placement within the Boekel Platelet Incubator Click Here to View Product Video INCLUDED: The Boekel Scientific 301200 Small Platelet Agitator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty