Shimadzu Axima Confidence MALDI TOF2 High Energy Mass Spectrometer NOTE - THIS IS A SPARES/REPAIRS ITEM

Innovative MALDI-TOF and TOF/TOF technology designed and optimized to be easy-to-use; robust systems (more) for both traditional MALDI applications (reliable and detailed protein/peptide characterization, and polymer analysis) as well as cutting edge work (high resolution MALDI Tissue Imaging, glycan analysis or high-throughput MALDI Biotyper microbial identification). The new autoflex speed incorporates a number of key features which enhance its capabilities and value including: Enhanced Speed with a 2 kHz (kiloHertz) proprietary smartbeam-II solid-state laser and electronics for high throughput applications including LC-MALDI, MALDI Imaging, and high-throughput microbiology ID Unique FAST-SRM mode provides single reaction monitoring capabilities for imaging of drugs and metabolites in tissue Expanded High-Resolution Mass Range for analysis of polymers and Top-Down, intact protein sequencing for long sequence readouts FlashDetector technology to increase resolution and prevent signal saturation for complex samples Self-cleaning Ion Source cleans the instrument source in minutes to improve system up-time and with minimal operator maintenance Optimized Software packages for numerous applications e.g. Protein-, Peptide-, Polymer-Analyses, and MALDI Imaging, clinical research methods and the MALDI Biotyper IVD-CE workflow. The most flexible autoflex instruments are available in linear only mode, high resolution reflectron mode and the latest TOF/TOF technology (LIFT) which enables the use of various MS/MS techniques (e.g. LID, high energy CID) for fast and sensitive MS/MS experiments. Including PC and several sample plates

Applied Biosystems NanoSpray II  MDS SCIEX  Assy no. 1014665 This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Applied Biosystems NanoSpray IIMDS SCIEXAssy no. 1014665SN - 0001042805

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

Bruker Microtof Bench Top ESI-TOF MS Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed. It powers on, but we are unable to conduct further at our facility. The power supply cable is included.

Seaward Stomacher Model: 80 Biomaster Lab System Lab This item was removed from a university where i (more)t was surplus to requirement. It is in very good cosmetic condition and powered on, we are unable to test it further at our facility.

Bruker Ultraflex TOF/TOF Mass Spectrometer This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further at our facility. The unit has some faults as confirmed by the lab On arrival system was in fault mode with 'laser interlock' error. Restarted the laser through marathon control and tested. The laser started to fire but then the high voltage switched off. Tested HV supplies and found that the ISS could only reach 19kv instead of the required 25kv. Suddenly the system started working again and peaks were seen on the sample BUT the system has 2 issues that are intermittent. 1. 30kv supply 2. Laser

This listing is for 1 of 4 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full workin (more)g condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Interface Box IF 2 enables the recording or control of instruments that are not supported by the (more) KNAUER software over four channels. It can be used for detector recording over the analog inputs, it can control the flow rate for HPLC pumps over the analog outputs, or it can switch valves over the digital outputs. However, the respective instrument must support this option. Please refer to the respective instrument manual regarding this option. The Interface Box IF 2 does not have a stand-alone function; therefore, control software (KNAUER ChromGate as of version 3.1 or KNAUER EuroChrom 2000 for Windows as of version 3.05) is mandatory.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Scilogex SK-O330-Pro Orbital LCD Digital ShakerThe Scilogex SK-O330-Pro Orbital LCD Digital Shaker f (more)eatures a backlit LCD display for speed and timer, maximum shaking weight of 16.5lbs, 100-500 rpm shaking speed range, and timer or continuous operation. INCLUDED: The Scilogex SK-O330-Pro Orbital LCD Digital Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty