Perkin Elmer Luminescence Spectrometer LS50B Lab

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System This was removed from a univer (more)sity lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility. All the units are in good cosmetic condition with minor marks. Included are; 1 x Thermo Finnigan LCQ Advantage Mass Spectrometer SystemSerial No. LAD00300 1 x Surveyor PDA DetectorPart No. SRVYR-PDA5Serial No. 56866 1 x Surveyor AutosamplerPart No. SRVYR-ASSerial No. 77269 1 x Surveyor MS PumpPart No. SRVYR-LPUMPSerial No. 62615 1 x Edwards 28 Vacuum PumpModel E2M28Serial No. 170517841 Supplied with:1 x Xcalibur LCQ Advantage Revision 1.3.1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.1 x Xcalibur Core Data System Software Revision 1.3.1 x Thermo MSQ 2.0 SP2 Instrument Control.1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.1 x Thermo Xcalibur LC Devices 2.4.0.2 x Thermo Xcalibur LC Devices 2.3.0 Software.1 x Thermo TSQ Series 2.1.1.1 x Thermo SurveyorPlus Manual Set.1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.1 x Emerson Industrial Automation Leroy-Somer Engine;2 x Spark Generators;1 x PULNIX 20mm CCD Camera;5 x Cables;3 x Spacer 7.7x3.2;1 x Spacer 6.3x3.2;2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;2 x Storer: TFS;1 x ThermoFisher Scientific Insulator Heater APCI;1 x O-Ring;1 x Plunger.

GBC Cintra 10 UV-Visible Spectrometer This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in good cosmetic condition with minor marks.

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 327.12

This Thermo Spectronic Genesys 10 VIS Spectrometer was removed from a university lab where it was su (more)rplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 1022.60

The single quad VERITY 1920 Mass Spectrometer is ideal for laboratories seeking effective MS detecti (more)on to isolate pure compounds. The versatile VERITY 1920 MS can utilize electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) ion sources, providing application flexibility. The detector can be combined with various Gilson Purification systems and selectively purifies active ingredients from small to large molecules and natural products from lab-to pilot-scale. Gas Supply: 4.1–6.9 bar, > 98% pure Nitrogen, < 8 L/min – Practical 5 L/min Mass Resolution: ± 1 m/z Sensitivity: 100:1 (ESI+ at 10 pg reserpine) Scan Rate: 10,000 m/z sec-1 Scan Modes: Positive and/or negative ESI, Positive and/or negative APCI Mass Range: 10–2000 m/z Detector Single: Quadrupole Mass Accuracy: ± 0.1 m/z Dynamic Range: 4.5 orders of magnitude Dimensions (LxWxH): 560 x 280 x 660 mm Weight: 32 kg

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

This listing is for a Sartorius LA4200S Balance. The unit is in full working condition and is ready (more) for immediate release. Achieve unparalleled accuracy in your laboratory with the Sartorius LA4200S Precision Top-Loading Balance. Designed for a wide range of applications, this high-performance balance offers exceptional precision and versatility, making it an essential tool for scientists and technicians alike. Key Features: High Capacity and Readability: With a maximum capacity of 4200 g and a readability of 0.01 g, the LA4200S ensures precise measurements for even the most demanding weighing tasks. Multiple Weight Modes: This balance supports various units of measurement, including Carats, Grains, Milligrams, Pounds, Ounces, Pennyweight, Grams, and Troy Ounces, allowing for flexibility in your weighing processes. Advanced Functions: Equipped with Averaging, Formulation, and Percent Weighing functions, the LA4200S is ideal for diverse laboratory applications, enhancing your workflow efficiency. Durable Construction: Built with a solid diecast metal base and a stainless steel weighing pan, this balance offers exceptional durability and resistance to corrosion, ensuring long-lasting performance. Technical Specifications: Calibration: Features motorized automatic internal calibration for easy and accurate adjustments. Communication: RS-232 communication capabilities allow for seamless data transfer, compatible with an aftermarket DB9 RS-232 adaptor converter with USB cable (available separately). Dimensions: Platform size of 8.6 x 7.9 inches (216 x 200 mm). Power Requirements: Operates with a 120V AC adaptor, included with your purchase. Protection Rating: IP54 protection against dust and spills, ensuring reliability in various environments. Benefits: User-Friendly Operation: The intuitive design and advanced features make the LA4200S easy to use, providing accurate results for research, quality control, and educational purposes. Choose the Sartorius LA4200S Precision Top-Loading Balance for a reliable, accurate, and versatile weighing solution that meets the high standards of modern laboratory environments. Experience the difference in your weighing tasks today!

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

Optika Inverted Microscope XDS-2 This item was removed from a university laboratory where it was sur (more)plus to requirements. The microscope is in very good used cosmetic condition, showing signs of general use. The lamp powers up and works as intended, and the lenses and objectives appear clear and functional. Specifications: - Model: XDS-2 Included Objectives: - 1 x Optika Plan 4x/0.10 ∞/1.2 - 1 x Optika Plan PH10x/0.25 ∞/1.2 - 1 x Optika Plan PH20x/0.40 ∞/1.2 - 1 x Optika Plan 40x/0.60 ∞/1.2 Eyepieces: - Pair of EW10X/22 Other Features: - Microplate-type sample holder fitted on the stage - Phototube extension for camera attachment

Eppendorf A-4-44 Swing Bucket Rotor with Buckets Eppendorf A-4-44 Swing Bucket Rotor with Buckets, C (more)at # 022638602, never used in box. The Eppendorf A-4-44 Swing Bucket Rotor with Buckets is used in the Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. (Adapters are not included) INCLUDED: The Eppendorf A-4-44 Swing Bucket Rotor with Buckets includes: - Buckets - Full 6 Month Parts and Labor Warranty Eppendorf A-4-44 Rotor SpecificationsCapacity4 x 100 mLMax Speed5,000 RPMMax RCF4,500 x g

Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette Designed for performance and comfort, PIPETM (more)AN® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 10 µLPipette ModelP10LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(3) { background-color: #fffacd; }Request a Formal Quote

Ohaus SHHD4525DG Heavy Duty Shaker The Ohaus SHHD4525DG Digital 45 kg Capacity Orbital Shaker is a l (more)arge capacity shaker with and orbit of 1 inch. They have a more powerful drive mechanism and larger orbits for optimal shaking of large vessels. With a load capacity up to 100 lbs and over 70 accessory options, and with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted. Built-in tray and non-slip rubber mat included with the SHHD4525DG. The exclusive Accu-Drive shaking system on digital models utilizes dual-speed sensors to continuously monitor and maintain shaking speed - delivering exceptional speed control, accuracy &amp; durability. Touchpad controls with independent LEDs for speed/time allow operator to view all settings at once. Timer displays elapsed time or when programmed to a set time, will turn off when time reaches zero. Speed ramping feature slowly increases the speed to desired setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD4525DG Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty