Varian Saturn 2000/2000R Mass Spec Lab Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

This Severn Analytical SA 6500 UV/VIS Absorbance Detector was removed from a university lab where it (more) was surplus to requirements The unit powers on and is in reasonable cosmetic condition. There are some surface marks and paint chipping around the unit from general use. There is a user manual included with it. It was not tested further.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Integra Biosciences Modell: Fireboy Plus Sicherheitsbunsenbrenner mit Gaskartuschenadapt (more)er für Campingaz CV 360 Art.Nr. (Bunsenbrenner): 144 000 Art.Nr. (Gaskartuschenadapter): 144 050 Beschreibung: Die Arbeit mit offener Flamme ist Bestandteil vieler Routineanwendungen in biologischen und chemischen Laboren. Doch die Gefahren im Umgang mit Spiritusbrennern, gewöhnlichen Gaskochern oder Standard-Bunsenbrennern, die am Gassystem des Gebäudes angeschlossen werden. Der Sicherheits-Bunsenbrenner Fireboy wurde entwickelt, um diese Gefahren zu beseitigen. Er ist schnell und sicher – Sie brauchen weder Streichhölzer noch ein Feuerzeug. Der Fireboy plus ist ein automatischer Bunsenbrenner zum Ausglühen und Abflammen von Labormaterialien aus Glas oder Metall. Eigenschaften: - Einfache Handhabung- Unabhängig und mobil- Klein und kompakt Technische Daten: - Düsen: 3, für Propan-/Butan-, Stadt- und Erdgas- Nennwärmebelastung: 1kW- Stromversorgung: Netzteil, 240V, 50/60 Hz, 12V, 5W- Abmessungen (BxTxH): 90mm x 180mm x 70mm Lieferumfang: - Integra Biosciences Fireboy Plus Sicherheitsbunsenbrenner mit Gaskartuschenadapter für Campingaz CV 360- Netzadapter Das Gerät ist in gutem Zusatand, 100% auf Funktion getestet und vollkommen einsatzbereit.

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

Izon Science Ltd - qViro Virus Viral  Particle Analysis System This was removed from a univers (more)ity lab where it was surplus to requirements. The item powers on and comes with a USB cable and power supply. It is in good used cosmetic condition.

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

HEIDOLPH BIOBLOCK SCIENTIFIC 94360 Magnetic Stirrer Speed ​​- Rpm: 0-1250 (infinitely variable) 140m (more)m Top Plate Diameter Stirring Volume (H2O): 15 Liters With Power Cable Good Working Condition

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System Collector Temperature -85 (more)°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. The included Edwards RV8 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System includes: - Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty