HPLC pumps

This Shimadzu LC10-AS Liquid Chromatograph System was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with minor marks from use. It has not been tested further. It is supplied with a Shimadzu Syringe Unit .XL. We were unable to power this as it requires a 20-pin connecter.

Jasco PU-1580 Intelligent HPLC Pump And TP Cell Unit Lab These items were removed from a university  (more)lab where they were surplus to requirement. Both items are in reasonably good cosmetic condition and power on, we are unable to test them further at our facility.

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus  (more)to requirements. The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point. The system is comprised of the following modules. 1 x Biotage SPXE 10810016;1 x Ecom Fixed Wavelength UV Detector ;1 x Biotage SP1 System & Monitor.

Waters 2525 Binary Gradient Module Lab This item was removed from a university where it was surplus  (more)to requirement. It is in reasonably good cosmetic condition but does not power on. Therefore, we are unable to test it, and it is listed as Spares/Repair.

Waters 2525 Binary Gradient Module This item was removed from a university lab where it was surplus  (more)to requirements. The module powers on but cannot be testing further at our facility. The previous client has stated it is not in working order. They were unable to elaborate further on the fault. Therefore, it is listed as Spares/Repair. Model: 2525Serial No.: G03APP 330M

Perkin Elmer Flexar Solvent Manager This was removed from a university lab where it was surplus to  (more)requirements. The unit is in good cosmetic condition with minor marks.

Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager – Spares/Repairs This system was removed from a un (more)iversity lab where it was surplus to requirements. All included units are in good cosmetic condition and power on. However, due to the following issue, the system is being sold as Spares/Repair: The FLM-3100 displays a valve error. Both valve bodies are missing, and the left-hand valve does not operate. This system comprises the following: Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager 2 x - IonPac CG5A 4 X 50mm Dionex FLM-3100 Flow Manager (top) Dionex FLM-3100 Flow Manager (bottom)

Gynkotek  P 580 A HPLC Pump & Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard & MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD & Tutorial

This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus (more) to requirements. All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use. The lab informed us that it was working fine before it was put away about 5 years ago. There are a number of consumables included with it. The system includes; 1x LC 100Part No. 182.0035 1x AC 100Part No. 183.0035 1x LC 110Part No. 193.0035 1x AS 100Part No. 181.0037 1x Decade IIPart No. 171.0035 1x OPRPart No. 184.0035

Amersham Biosciences AKTA FPLC System UPC-900 P-920 INV-907 M-925 Frac-950 This was removed from a u (more)niversity lab where it was surplus to requirements. The unit has been professionally serviced and is in full working order. It will require an interface box to connect it to a PC. It is in good cosmetic condition with minor marks from use. Included are; P-920 -Serial number- 01155727Code number- 18-1164-68 AKTA FPLCserial number- 01160429Code number- 18-6083-20 UPC-900Serial number- 01159938Code number- 18-1128-95 INV-907Serial number- 01158917Code number- 18-1108-40 M-925Serial number- 01160502Code number- 18-1118-89

This item has just arrived in our stock. Please enquire for further details.

Dionex IC Ion Chromatography System The system has been professionally serviced and is in good work (more)ing order. It is in good cosmetic condition with minor marks. Included are; 1x Dionex P680 LPG-4 HPLC PumpS/N: 4940419P/N: 5030.0015 1x Dionex UCI-50 Chromatography InterfaceS/N: 3040415P/N: 5911.0005 1x Dionex Solvant Rack SOR-100S/N: 4870402P/N: 5030.9200 1x Dionex P680 instruction manual. 1x Dionex CM DongleS/N: 30044

Hewlett Packard 1100 Series System G1313A, G1312A, G4212B, G1316A, G1322A Lab This system was remove (more)d from a university where it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility. System comprises: Hewlett Packard G1313A ALS ExchAgilant 1100 series G1312A BinPumpHewlett Packard G1316A ColcomHP ProDisplay P201 MonitorAntec Computer Tower (Software already Installed on item)HP KeyboardMouse Software:ChemStationAgilent LabAdvisor

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace depar (more)tment. The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft. In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft. Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students. This is a genuine full size jet engine. Its an extremely rare opportunity to acquire a unit like this. General Electric Model: CF6-6D1A Jet EngineRemoved from retired DC10-10 AircraftHas flown about 40 million miles in its 20-year working life. Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts. There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage. It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

This was removed from a university lab where it was surplus to requirements. The lab informed us tha (more)t it was in use until December 2022 and was fully serviced by Waters up to Feb 2023. All modules are in excellent cosmetic condition with only minor marks from use. Included are; 1 x Waters Sampler ManagerPart Number: 186016007S/N: J10NPS 788M The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays.  1 x Waters Binary Solvent ManagerPart Number: 186016002S/N: H10NPB 923NThe unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility. 1 x Waters Auxiliary Solvent ManagerPart Number: 186016021S/N: H10NPA 505NThe unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility. There is also a network switch on the top of the stack. It is untested. It comes with 5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020. A set of bagged tubes that are labelled as "solvent aux".

Shimadzu FVC-10ADvp gradient unit.

Moisture analyzer Radwag MA 50.R. Max weight 50 g. Readability 1 mg. Plate size 90 mm. Fast and unif (more)orm heating with infrared. Drying temperature up to 160 ºC with four standard measurement profiles, fast, stepped, smooth. High repeatability +/- 0.05% (~ 2g sample), +/- 0.01% (~ 10g sample). RS232, USB type A, USB type B and Wi-Fi interface. Suitable for measurements in solids and liquids. Exportable data to Excel or Word.

Nahita Quartz water distiller. Production 4 L/h. Conductivity at 20ºC 2 µS/cm. Water consumption 1.0 (more) l/min. Made of borosilicate glass. Quartz heater to obtain high purity water. With safety device (flow sensor). Resistance 1x 2500 W. User manual. The Nahita Quartz automatic water distiller. and continuous production, with quartz resistance, it provides us with high quality distilled water given the great purity of the water obtained, free of metal ions and pyrogenic substances, suitable for the preparation of reagents, bacteriological culture media, final washing of glass etc It is made entirely of high quality borosilicate glass, which allows continued use of the equipment and guarantees its durability. It has a safety mechanism that automatically disconnects the quartz resistance when the pressure of the cooling water decreases, and connects it again when it recovers. It has a support adapted for coupling to the wall and its reduced dimensions allow easy handling and cleaning. The equipment finds its application in clinics, hospitals and laboratories in general, located in the research departments of agri-food, pharmaceutical, environmental companies, etc. as well as in schools and universities. In case of deterioration, accidental breakage, etc, of the parts that make up the equipment, the following components are available below for replacement:

HPLC Waters 600 system. Includes a Waters Delta 600 multi-solvent quaternary pump, CPG column, a Wat (more)ers photodiode array detector (PDA) 2996, a Waters 600 controller, a Waters 717 autosampler, a PC with a PCI card and Empower software 3. Pump head volume of 225 μL at a flow rate of 45 ml / min or a pump head volume of 100 μL at a flow rate of 20 μl. ml / min It has an operating flow range of 0.01 to 45.0 mL / min, adjustable in increments of 0.01 mL / min.

Agilent 1100 Series HPLC System consisting of: 1100 Series Degasser G1379A S / N: JP40716471. Binary (more) Pump 1100 Series G1312A FW: A.07.01 S / N: DE43616890. Automated injector Series 1000 G1313A FW: A.07.02 S / N: DE23920959. Thermostated column compartment G1316A 1100 Series FW: A.07.02 S / N: DE43643595. 1100 Series UV Detector G1314A with 10mm cell and G1369A LAN card FW: A.07.02 S / N: JP24020131. Windows 7 PC with Chemstation B.04.03-SP1 Agilent 1100 Series HPLCs are considered the most popular HPLCs in the world. They are robust, durable and versatile systems. Our instruments are restored according to the manufacturer's specifications to provide the best performance. They have a one year warranty. The 1100 HPLC series supports efficient pump action as well as advanced data analysis and diagnostic software. The system is easy to use and has a low cost. Looking for a more personalized product? All of our Agilent HPLC systems can be configured to your specific requirements.

Fungilab Thermovisc 100-F8 Refrigerated Re-Circulation Thermostat. Working volume 8 L. Range -10 to  (more)+ 100 ° C. Integrated cooling unit for measurement at 20 ° C without external cooling by circulating water. Stability ± 0.05 ° C to 100 ° C and ± 0.1 ° C to -10 ° C. Construction adapted to the rotary viscometer Fungilab: the measuring head fits perfectly on the sample holder. Integrated support for 2 beakers 600 mL. Opening 94 mm with locking device. Used to thermostate a second sample while measuring on the first. User manual.

Bunsen Vortex Shaker - AGT9 tube mixer. Speed range from 50 to 2600 rpm. Head stock for mixing test  (more)tubes of up to Ø 20 mm. Specifications: • It has two switchable working modes: - Continuous mode for uninterrupted mixing. - Manual mode in which mixing is activated automatically by slightpressure from the tube on the head stock. • Metal housing painted in epoxy. • Electronically regulated speed control. Stirring speed Variable between 50 and 2600 r.p.m Power 48 W Dimensions (W x H x D) 140 x 100 x 155 mm Weight 4 kg Eccentricity 6 mm

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

TSP HPLC P4000 + AS3000

Solvent delivery method: Parallel-type double plunger Plunger capacity: 10µL Maximum discharge press (more)ure: 40MPa Flow-rate setting range: 0.0001 to 10.0000 mL/min Flow-rate accuracy: No more than 1% or 0.5µL/min, whichever is greater (0.01 to 2 mL/min.) Flow-rate precision: No more than 0.06% RSD or 0.02 min SD, whichever is greater Pulsation: 0.1 MPa (for water at 1.0 mL/min. and 7MPa) Constant-pressure solvent delivery: Supported Plunger rinsing mechanism: Manual rinsing or automatic rinsing using optional product Safety measures: Liquid-leakage sensor, high-pressure/low-pressure limits Gradient type: Low-pressure mixing Number of mixed solvents: 4 max Dimensions (WxHxD): 260 x 140 x 420 mm Weight: 10 kg