Environics IUT Medical ENVI-Air GC-IMS-Analyzer Ultra-Low Level Gas Detection

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Tenenergy 10,000 mAh NiMH rechargeable battery1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

This listing is for a Drager Accuro Gas Detector Pump.The unit is in full working condition and is r (more)eady for immediate release.The Drager Accuro Gas Detector Pump is a robust and versatile manually operated bellows pump, tailored for effective gas detection in challenging environments.Key Features:Manual Operation:Designed for manual use, this pump requires no external power supply, making it ideal for potentially explosive atmospheres where electrical equipment may pose a risk.One-Handed Operation:Its ergonomic design allows users to operate the pump with one hand, facilitating gas detection in confined or hard-to-reach spaces, such as narrow pipelines or cramped industrial areas.Calibrated 100 mL Sample:The pump accurately draws a 100 mL sample through the gas detection tube, ensuring precise measurements for a wide range of gases.Pressure-Controlled End of Stroke Indication:This feature provides a clear signal when the sample has been drawn, enhancing user confidence that the measurement is complete and accurate.Compatibility:The pump is compatible with over 500 different short-term gas detection tubes, offering extensive versatility across various applications.Benefits:Fast Measurement:Users can perform gas measurements quickly, which is critical in time-sensitive situations such as emergency response or environmental monitoring.Reliable Measurements:The design ensures dependable operation, even in difficult-to-access locations, making it suitable for a range of industries, including manufacturing, construction, and environmental science.Cost-Effective:The manual operation and compatibility with numerous gas detection tubes provide a budget-friendly solution for regular gas monitoring without needing elaborate electronic equipment.Easy to Use:Minimal training is required to operate the pump, making it accessible to a broader range of users and reducing downtime.Applications:Industrial Safety: Ideal for monitoring gas levels in manufacturing plants, warehouses, and construction sites.Environmental Monitoring: Useful for assessing air quality in potentially hazardous or remote locations.Emergency Response: Essential for first responders evaluating hazardous gas situations in emergencies.

Perkin Elmer Model Clarus 500 Gas Chromatograph (FID Detector) Lab This item was removed from a univ (more)ersity lab where it was surplus t requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. The previous client has stated it was in working order when it was last in use.

This RAE Systems QRAE+ PGM2000 Multiple Gas Detector was removed from a university lab where it was  (more)surplus to requirements. The item powers on and is in reasonable used cosmetic condition. We were unable to test it further at our facility. It comes in carry case with:Alkaline Battery 4.5v (PN-015-3052)12vdc Power SupplyCableBag of small filtersCalibration Adapter (PN-015-3008-100)

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

17 Boxes of Mixed FisherBrand SureOne Pipet Tips Non filter + Aerosol Barrier Individually sealed a (more)nd brand new. 10 packs of 96 tips per box amounting to 960 tips per box Sizes are as follows: 100µl- 5 boxes (4800 tips)300µl- 3 boxes (2880 tips)10µl- 3 boxes (2880 tips)200µl- 1 box (960 tips)20µl- 2 boxes (1920 tips)1000µl -3 boxes (2880 tips) Also individually theres an additional: 10µl- 3 packs (288 tips)20µl- 3 packs (288 tips)200µl- 3 packs (288 tips)100µl- 6 packs (576 tips)300µl- 5 packs (480 tips) Mixed expiry dates between 2026-2028

VACUUBRAND ME 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Spee (more)d 1.4 cfm Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Outstanding chemical resistance. - Long diaphragm life, maintenance-free drive system. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. One-stage chemistry diaphragm vacuum pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. Typical applications are vacuum ovens, filtrations as well as concentration of solvents with low boiling points. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. The well proven robust PTFE sandwich diaphragm provides outstanding reliability and operating life. INCLUDED: The VACUUBRAND ME 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg