Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Supplier
Marshall Scientific
Location
Hampton - United States
Price
$8,028.00 
(ex. VAT)
This item is
for sale
State of item
new
Categories

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V

Marshall Scientific$8,028.00 (ex VAT)
item image

Description by the supplier

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V



Internal Capacity

300L

Temperature Range

Ambient +10-210°C

Temperature Accuracy

±1°C (at 210°C)



Features

- Programmable

- High precision controller with improved display visibility and operability

- Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information

- Maximum 99 steps, 99 patterns, repeat operation

- Easy sample data collection with cable port

- Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker






Semi automatic benchtop glassware washer with upward and downward two-way pressurized water with rotating jet nozzles bringing high level cleaning. Easy to to operate by simply setting time then start. With built-in water heater, no boiler piping and water heating system are required. Optional jet rack is available for hard to clean targets, such as glassware with narrow neck or body. Washing water temp. range: ambient ~60°C.INCLUDED:

The Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V includes:

- Power Cord

- Operator's Manual

- Manufacturer's Documentation

- 1 Year Manufacturer's Warranty

Product details
Cleaning methodUpward and downward two-way pressurized water jet method; Rotating jet nozzles (fixed when using jet rack)
Washing water temp.Room temp. ~ 60°C
Water heaterBuilt-in heater 1kW, room temperature to 60°C
Supply water pressure0.1~0.3MPa
Glassware standTable (Standard), racks (optional)
Water supplyElectromagnetic valve open/close
Water drainNatural drainage by water level gap
Exterior materialChrome-free electric galvanized steel plate, chemical-resistant paint
Interior materialStainless steel
External dimensions*W450 x D490 x H875mm
Internal dimensionsW420 x D450 x H570mm
Pump200W
Spin tableDia. 420mm
DoorDrop down style
Weight~43kg
Power source (50/60Hz)AC115V 13A AC220V 7Awith external transformer
Included accessories1 pc. water supply hose (with coupler) 2m, 1 pc. drain hose (I.D.25.4mm) 1.5m, 1 pc. vinyl cover, water supply unit
ConsumablePhosphorus-free detergent
About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:
Ohaus EX225D Explorer Semi-Micro Dual Range Analytical Balance, 51 g/120 g, 0.00001 g/0.0001 g-cover
Ohaus EX225D Explorer Semi-Micro Dual Range Analytical Balance, 51 g/120 g, 0.00001 g/0.0001 g

Ohaus EX225D Explorer Semi-Micro Dual Range Analytical Balance The OHAUS EX225D Explorer semi-micro  (more)balance has been designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max dual weight capacity of up to 120 g/220 grams, and a dual readability of 0.01mg/0.1mg. Internal CalibrationOHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX225D includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX225D Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX225D Explorer Semi-Micro Dual Range Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$7,869.00 ex VAT
United States
scanning electron microscopes, balances, electron microscopes, scales
Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz-cover
Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz

Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

$20,024.00 ex VAT
United States
electron microscopes, safety cabinets, safety equipment, transmission electron microscopes
Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet-cover
Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet

Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room T (more)emperature (CRT) Cabinet Temperature Setpoint Range 20°C to 25°C Capacity 5.2 cu. ft. (147.2L) Defrost Method Cycle Features - Microprocessor temperature controller with digital display for precise temperature management - Interior fan-driven, forced-draft air circulation system for excellent temperature uniformity and recovery - Audible and visual high/low temperature alarms with remote alarm contacts - Three adjustable shelves with guard rails and a bottom footed shelf for air circulation - Right-hinged solid swing door with keyed lock and magnetic gasket for security - LED interior light with switch activation and probe access port - Freestanding thermometer with 3-year calibration certificate and min/max memory - Environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation The Corepoint Scientific CRTPR061WWW-0 20°C to 25°C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet is designed for precise temperature control and reliable storage. This 5.2 cu. ft. capacity cabinet features a microprocessor temperature controller with a digital display, ensuring accurate temperature management within the adjustable range of 20°C to 25°C. An interior fan-driven, forced-draft air circulation system provides excellent temperature uniformity and recovery after door openings. The cabinet is equipped with audible and visual high/low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) for enhanced monitoring. Additional features include a right-hinged solid swing door, three adjustable shelves with guard rails, a bottom footed shelf for air circulation, and a back wall evaporator cover. Security is ensured with a keyed door lock and magnetic door gasket. The unit also includes a freestanding thermometer with a 3-year calibration certificate, min/max memory, switchable °F/°C, an LED interior light, switch-activated light, probe access port, leveling legs, and a powder-coated exterior. It uses environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation. This cabinet is ideal for storing medications and other sensitive products, preventing unnecessary expenses and product recalls. INCLUDED: The Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet includes: - Key for Door Lock - 3 x Adjustable Shelves - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

$1,531.00 ex VAT
United States
transmission electron microscopes, electron microscopes
People are watching right now:
Agilent 5975B inert EI/CI MSD with SIM Direct Inlet Probe-cover
Agilent 5975B inert EI/CI MSD with SIM Direct Inlet Probe

For sale: refurbished Agilent GCMS including:  – Agilent 5975B inert EI/CI MSD with Turbo pump – Agi (more)lent 7890B GC with Split/Splitless inlet and FID Detector – Agilent 7693 – G4513A autoinjector and 150 vial tray – G4514A – SIM Direct Inlet Probe – complete with software and computer Also available: Agilent 5793N, 5975A, 5975C MSD Complete Agilent GC or MS systems Used Parts for Agilent 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! For sale: refurbished Agilent GCMS including:  – Agilent 5975B inert EI/CI MSD with Turbo pump – Agilent 7890B GC with Split/Splitless inlet and FID Detector – Agilent 7693 – G4513A autoinjector and 150 vial tray – G4514A – SIM Direct Inlet Probe – complete with software and computer Also available: Agilent 5793N, 5975A, 5975C MSD Complete Agilent GC or MS systems Used Parts for Agilent 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! For sale: refurbished Agilent GCMS including:  – Agilent 5975B inert EI/CI MSD with Turbo pump – Agilent 7890B GC with Split/Splitless inlet and FID Detector – Agilent 7693 – G4513A autoinjector and 150 vial tray – G4514A – SIM Direct Inlet Probe – complete with software and computer Also available: Agilent 5793N, 5975A, 5975C MSD Complete Agilent GC or MS systems Used Parts for Agilent 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty!

Netherlands
general laboratory equipment other
IKA MultiDrive basic M20 Successor Package-cover
IKA MultiDrive basic M20 Successor Package

IKA MultiDrive basic M20 Successor Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC (more) Process type Batch Features - Performs a wide range of crushing tasks on hard, soft, or fibrous samples - Suitable for dry grinding of hard and brittle substances with MI 250-S milling chamber - Interval operation benefits coarse crushing of hard samples and thorough blending - Integrated cooling in the milling cup for indirect heat dissipation; supports dry ice use - Batch processing with cutting, impact, blending, and dispersing capabilities - Brushless DC motor for reliable operation - Equipped with a USB interface for connectivity Regardless of whether samples are hard, soft or fibrous – IKA MultiDrive basic performs a wide range of crushing tasks. In combination with the milling chamber MI 250-S MultiDrive basic is perfectly suitable for dry grinding of hard and brittle substances. - High performance: 1000 Watt output and variable rotational speeds ranging from 3000 rpm to 20 000 rpm guarantee excellent crushing results. - Interval operation: Is an asset during the coarse crushing of hard samples or for extra thorough blending. - Integrated cooling: A cooling system is integrated in the milling cup, which allows indirect heat dissipation. In addition, dry ice can be used for cooling. INCLUDED: The IKA MultiDrive basic M20 Successor Package includes: - IKA MultiDrive basic - MultiDrive MI 250 – S - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$4,362.00 ex VAT
United States
general laboratory equipment other
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]