Agilent 6850 GC Gas Chromatography System Lab

Varian 450 GC-MS System with 300-SQ Mass Spectrometer & CP 8410 Autosampler This system was remo (more)ved from a university lab where it was surplus to requirements. It was reported by the previous client to be working when it was last in use. All units power up and appear to connect to the PC and Software. The system consists of: 1 x Varian 450 GC-MS Gas Chromatographwith CP-8410 Autosampler. 1 x Varian 300-MS SQ Mass Spectrometerwith Varian pump. 1 x Dell Optiplex 960with keyboard, monitor & mouse.PC is running Windows XP SP3.And Varian MS Workstation System Control Version 6.9.2.

For sale: NEW Agilent 7820 FID

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

This was removed form a unuiversity lab where it was surplus to requirements. The unit did not power (more) up in testing. We are advised it has a board fault. It is sold for spares/repairs.

Shimadzu GC-2010 Plus Gas Chromatograph With Computer System This system was removed from a universi (more)ty where it was surplus to requirement. All units are in good cosmetic condition and power on independently. The lab confirmed it was in full working order prior to removal. This system includes a PC set-up with the following software installed:Shimadzu AFT Launcher The system comprises the following: Shimadzu GC-2010 Plus HP ProDesk PC with softwareHP MouseMicrosoft KeyboardAcer Led Monitor

This Planer Kryosave Compact K250/1.7 & Temperature Gauge Model K51-230-N-F-H were removed from  (more)a university lab where tey were surplus t requirements. Both units are in reasonably good cosmetic condition but they both have various marks and scrapes. The KS1 has a chip out of the bottom plate. They both power up and appear to work together. The system comprises of; 1 x Planer Kryosave Compact K250/1.7 - Powers up and the motor starts spinning. It is in good cosmetic condition. 1 x Planer Kryosave Temperature Gauge Model K51-230-N-F-H. - The unit powers up and displays the message "EE.E". It is in reasonable condition but has a chipped frame at the bottom.

GE AKTA Purifier UPC 10 FPLC System with FRAC-950 Fraction Collector This system was removed from a  (more)university laboratory where it was surplus to requirements. All included units power on and pair successfully, we could not test the system further at our facility. They are all in good cosmetic condition. Includes: - AKTApurifier - Box-900 - UFC-900 - P-900 - Frac-950

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

This Miltenyi Biotec autoMACS Cell Separator Model 003 was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with marks from use. It comes with 4 x 1000ml Glass Bottles

Carl Zeiss Axiovert 35M Inverted Microscope This was removed from a university lab where it was sur (more)plus to requirements. The unit was tested with a PSU from another unit. It powers up and the lamps work. We build a makeshift stage and the objectives are clear and in good working order. The microscope has no stage. It is in good cosmetic condiiton with minor marks. Includes the following: PL 10x/20 Eyepiece x 2 Objectives: Zeiss Plan-Neflaur 2,5x/0,75 Zeiss Achrostigmat 5x/0,12 -/∞ Zeiss Achrostigmat 10x/0,25 Zeiss Achrostigmat 20x/0,30 Ph1 Zeiss Achrostigmat 20x/0,40 Ph1

Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5  (more)x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for high vacuum applications. It offers user-friendly operation via a 7-inch touch display, with remote control capabilities through a web server. Designed for reliability and versatility, this system handles a wide range of demanding tasks. Featuring a final pressure of 1 x 10⁻⁷ mbar (7.5 x 10⁻⁸ Torr) and a maximum pumping speed of 1.8 m³/h, it ensures efficient and consistent vacuum generation. Equipped with the Pfeiffer MVP 030-3 diaphragm backing pump and the HiPace 80 Neo turbopump, this unit provides a pumping speed of 67 l/s for nitrogen. It operates quietly, with an emission sound pressure level of ≤50 dB(A), and is suitable for worldwide use with its wide range of input voltages (100-240 V AC). The air-cooled system, compact design, and flexible connection options make it an ideal solution for various high-vacuum needs. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty