Radwag WLY 12/F1/R Precision Balance

PM Balances by RADWAG Laboratory Precision Under Industrial Conditions. New technology The ability t (more)o weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 30 mm, length: 150 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

ZD421t (ZD4A042-30EM00EZ) - printer suitable for printing thermal and thermal transfer self-adhesive (more) labels. The maximum width of the media is 108 mm, with the maximum print on the width of 104 mm. As standard, it has a built-in movable label sensor. Printing takes place at speeds up to 152 mm / s, printing resolution 203 dpi. The printer is equipped with a USB port. The basic version of the printer does not include a dispenser and a cutter.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The case is designed for safe transportation of PS and WLC (A1 and A2) series balances. It was made  (more)of 6-millimeter-thick plywood. It has reinforced corners, an aluminum finish and a filling of hard dark foam. It is equipped with one handle for convenient carrying by one person and two locks with key locking capability.

Precision Balance for statistic control The purpose of the scale is the packaged goods control (PGC) (more), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization). PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOCK technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

Level sensor / regulator

Stirring rod with propeller ideal for very low/medium viscosity range at medium/high speed range. Co (more)mpatible for use with ES, LS, DLS, LH, DLH, PW, OHS series pole stirrers. It is a standard stirring rod which generates an axial flow in the container with the suction of the substance from the bottom upwards. All VELP stirring rods are made of stainless steel. When choosing the correct stirring rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

Labconco 7814800 Acid Trap Insert The Labconco 7814800 Acid Trap Insert Traps is connected between a (more)n evaporator and vacuum pump to provide additional protection to the pump. The insert contains acid neutralizing desiccant that changes from off white to purple when exhausted. Please Note: This includes the insert ONLY and requires a Clear Polypropylene Canister with mounting bracket or Clear Polypropylene Canister with stand for proper use. INCLUDED: The Labconco 7814800 Acid Trap Insert includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty