Radwag 5Y.10.PM Precision Balance

F2 Mass Standard - knob weights, service case. Nominal value - 250 kg.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 11 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

M1 Mass Standard - knob weights. Nominal value - 500 kg.

Special holders in RADWAG balances enable weighing of a wide range of microscale glassware, includin (more)g test tubes, flasks, vials, etc. The holders have been designed to increase ergonomics and minimize the risk of contamination during sample application. They have the ability to tilt the microscale glassware, allowing it to be placed at any angle, depending on the application. The set includes dedicated draft shields, to stabilise the conditions inside the weighing chamber, and a stand, to store the holders.

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39922 Disov3ry Paste Extruder ITEM-39923 Ci Robal SystemITEM-39924 Various CryotanksITEM-39925 Stuens Knuth Rotor ITEM-39927 Pyrex Freeze dryer chamber ITEM-39074 Eppendorf Minispin ITEM-39076 Sprout Centrifuge ITEM-39075 Start see-saw rocker SSL4 ITEM-39073 Capex 2dc ITEM-39930 Russel Hobbs MicrowaveITEM-39966 FisherBrand FB 70155 x 2 ITEM-39962 Nalgene Bottle x 2ITEM-39072 Gilson Pipet StandITEM-41032 2 x Boxes Gilson Pipetman kits ITEM-41042 2 x Boxes VWR Weigh BoatsITEM-41043 Mixed Miscellaneous plasticware ITEM-41044 Box of Thermo Scientific Nunclon PlatesITEM-41045 Applied Biosystems 96 Well Starter KitITEM-41046 4 x Mettler Toledo SensorsITEM-41047 Bio-Rad Bio-Dot ApparatusITEM-41048 Bio-Bin Pipet/Sharps Bins with Z stands ITEM-41049 Box of mixed assorted Plastic Syringes ITEM-41050 Box of mixed brand assorted plastic tubes/vials ITEM-41051 5 x Nalgene 1000ml Plastic BottlesITEM-41052 Pack of 4 Corning 500ml Centrifuge TubesITEM-41053 Corning 2L Erlenmeyer Flask ITEM-41054 Azlon 2000:20ml Plastic Flask ITEM-40939 IKA RCT basic Magnetic stirrer with heatingITEM-40940 Lafert D/351VM/7 Pump ITEM-40941 Lafert D/351VM/7 Pump ITEM-31370 Maps Trainer Telestrator System

Julabo CF31 Cryo-Compact Refrigerated Circulator, 115V/60Hz Working Temperature Range -30°C to 200° (more)C Cooling Capacity 320W at 20°C Refrigerant R134a Features - Ergonomic design and easy operation - Small overall dimensions for lowest space requirement - Splash-proof keypad - Bright VFD display and interactive LCD dialog display - Highly precise ICC cascade temperature control - RS232/RS485 interface for PC connection - Electronically adjustable pump stages - External Pt100 sensor connection - Integrated programmer with 6x60 program steps - Early warning system for low liquid level - 3-point calibration - TCF Temperature Control Features - Adjustable high temperature cut-off - Classification 3 according to DIN12876-1 - Pump connections for external temperature applications - Bath opening for temperature control of small objects in the bath - Front drain The CF Cryo-Compact refrigerated/heating circulators have a very small footprint which is ideal for placing on a benchtop or in a fume hood with limited space. Models feature M16x1 male pump connections for external temperature applications with 8 and 12 mm hose barbs. The HighTech CF31/CF41 units have a working temperature range from -30(-40) to +200°C and include a dual screen display with numeric keypad for easy data entry and instrument reading. RS232 port for external communication and Pt100 sensor connection for external monitoring and control. A 4-speed centrifugal pressure / suction pump provides 22-26 L/min flow with 5.8-10.2 psi pressure / 2.9-5.6 psi suction. Integrated programmer with 6 x 60 program steps. INCLUDED: The Julabo CF31 Cryo-Compact Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo DYNEO DD-450F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V (more)/60Hz Refrigerant R290 Working Temperature Range -30°C - 200°C Cooling Capacity 440W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-450F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.44kW cooling power at 20 °C with 60W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-450F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dimensions (HxWxD): 620 x 900 x 500 mm Internal dimensions (HxWxD): 580 x 860 x 475 mm

Precision Balance WTC Fast and accurate mass determination both in the lab and in the factory. Energ (more)y-efficient electronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Anything else? Plenty! Printer, computer, USB flash drive, additional display – the WTC balance can work with them through communication interfaces. In addition, a real-time clock and ALIBI memory. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a balance. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

For sale: NEW Agilent 7820 FID