Radwag F1 Mass Standard - Flat Polygonal Sheet - 20 mg

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 10 kg), wooden box Number of pi (more)eces in the set: 17 Weights 1 g i 2 g – solid masses without adjusting chamber

F2 Mass Standard - knob weights, service case. Nominal value - 1000 kg.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), wooden box Number of p (more)ieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 50 mg Material: Nickel silver High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 5 mg Material: aluminum M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 12 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves.

LAUDA LOOP: Compact circulation thermostat for constant temperature applications from 4° to 80°C Ove (more)r a two-year period of intensive research and development, LAUDA has reinvented Peltier technology. Based on this proven technology, LAUDA LOOP, a new type of unrivaled thermoelectric circulation thermostat, has been developed. The positive response from industry customers confirms that the design of a location-independent, space-saving and environmentally friendly temperature control meets the growing demands of modern work processes in terms of flexibility, independence and versatility. A practical, lightweight tool with a smart design for all types of applications. The two versions: LOOP 100 and LOOP 250 The two types of air-cooled devices, L 100 and L 250, provide cooling capacities of 120 and 250 Watts and a heating power of 0.2 and 0.4 Kw. The focus is on applications that require a constant temperature with low energy consumption. Both types of devices are exceptionally efficient in part load operation. Notable features - Small size, low weight - Thermostating with temperature control without refrigerants thanks to Peltier technology - Electrically adjustable fan - Exceptionally energy efficient in part load operation - 3 button control with OLED display - Voltage: 100-240V, 50 / 60Hz - RS 232 interface as standard - Very quiet and barely perceptible vibrations - Under / over temperature alarms Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections. Simple control panel with large TFT display with extensive information; easy to navigate and change settings. Tank cover elegantly hidden and protected in the structure of the instrument. Serial connection on the back: RS232; pump outlet and inlet connections. Chart of the LOOP LAUDA pump characteristics and the two LOOP LAUDA models available. 1 - Controller with temperature display and control buttons (soft buttons) 2 - Cover over the tank lid 3 - Ventilation openings 4 - 4 feet 1 - Ventilator fan on the underside. - The device sucks up fresh air from below! a. - Tank with filler nozzle and cover 1 - Pump connection IN inlet (back from consumer) 2 - Pump connection OUT outflow (to consumer) 3 - RS 232 interface (socket) 4 - Device panel plug 5 - Box for 2 safety fuses 6 - Mains switch 7 - Rating label

This listing is for a Vibra HTR-220E Balance

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Gilson Pipetman Neo P8x200 Multichannel PipetteFeatures - Redesigned tip ejector and ejection spring (more)s reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo 8x200 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P8x200 Multichannel Pipette Specifications Model8x200 Cat # F14403Volume (ul)20100200Max. Permissible Systemic Error (ul)± 0.50± 1.00± 2.00Max. Permissible Random Error (ul)≤ 0.25≤ 0.40≤ 0.60Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul) 22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul) ≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Complete rotation evaporation system consisting of: IKA RV 10 Auto rotary evaporator IKA HB Digital  (more)waterbath IKA RC 2 Control recirculating chiller IKA Vacstar Digital vacuum pump IKA RV 10 Auto: The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. Type of cooling: Vertical condenser Cooling surface: 1500 cm2 Speed range: 5 – 300 rpm Reversible direction of rotation: yes Speed tolerance set rotation speed < 100rpm: ±1 rpm Speed tolerance set rotation speed > 100rpm: ±1 % Lift: Motor Stroke: 140 mm Vacuum controller integrated: yes Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 34.96 kg IKA HB Digital: Compact and ergonomic heating safety bath for all tempering media. Heating temperature range: Ambient – 180°C Heat control: Turning knob Set temperature resolution: ±1 K Filling volume max.: 4 l Filling point min.: 60 mm Material in contact with medium: stainless steel 1.4404 Fixed safety circuit: 190°C Adjustable safety circuit: 50 – 190°C Outer diameter: 257 mm Inner diameter: 225 mm Outer height: 190 mm Inner height: 130 mm Dimensions (WxHxD): 330 x 190 x 325 mm Weight: 3.9 kg IKA RC 2 Control: High efficient and temperature-stable circulating chiller with unique wireless controller. Designed for cooling applications up to -30 °C with powerful 400 W cooling capacity. The speed-controlled PEEK pump allows an indirect continuous adjustment of the maximum pressure and flow rate. Due to its outstanding temperature stability of about ± 0.05 K (at -10 °C), the RC can handle even the most demanding applications. Via the connection socket for an external PT 100 temperature sensor, it is possible to measure and control temperature directly in the working medium. An external PT 100 temperature sensor is included in scope of delivery. With the wireless controller (WiCo), it is possible to operate the RC 2 safely and comfortably independent of the device position. The included feed hopper and bleed valve enable the safe and clean handling of the thermofluid. An easy to open front hood allows for convenient cleaning of the air filter. The high quality insulated 4-liter bath reservoir allows the use of up to 2.5 liters of thermofluid in the external cooling circle without refilling. Cooling agent pressure max.: 20 bar Cooling capacity (20°C): 400 W Cooling capacity (10°C): 370 W Cooling capacity (0°C): 320 W Cooling capacity (-10°C): 240 W Cooling capacity (-20°C): 130 W Operating temperature min.: -30 °C Operating temperature max. (with external heating): 80 °C Temperature display: yes Temperature control: PT 100 Connection for ext. temperature sensor: PT 100 Display resolution: 0.01 K Display for operation with ext. sensor: yes Warning function optical: yes Warning function acoustic: yes Warning function excess temperature: yes Warning function insufficient temperature: yes Sub-level protection: yes Filling volume: 1.4 – 4.0 l Pump type: Pressure- / suction pump Pump capacity adjustable: yes Pump pressure max. (0 liters discharge flow): 0.3 bar Pressure pump (suction side) (0 liter flow): 0.2 bar Flow rate max. (0 bar back pressure): 18 l/min Calibration option: yes Dimensions (WxHxD): 220 x 475 x 525 mm Weight: 28.5 kg IKA Vacstar Digital: The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant. Pump rate max.: 1.32 m³/h Pump rate max.: 22 l/min Final pressure without gas ballast: 2 mbar Suction levels: 4 Cylinder: 4 Two-point control: yes Analog speed vacuum control: yes Speed control: Turning knob Speed range: 285 – 1200 rpm Material in contact with medium: Al2O3, PTFE, FFPM, PPS, NBR Dimensions (WxHxD): 150 x 375 x 370 mm Weight: 11.5 kg