Adam Equipment ETB 6202E Equinox Precision Balance, 6200g, 0.01g

Accuris Precision Balance, 320 Grams Accuris Precision balances quickly and accurately display sampl (more)e measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams. Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The smaller capacity models (120g, 320g, and 500g) include a glass draft shield with 3 sliding doors for easy access the weighing chamber. These models offer readability to .001g (1mg). All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection.INCLUDED: The Accuris Precision Balance, 320 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

F1 class standard: knob weight Nominal value: 5 kg Material: stainless steel Knob weight is exceptio (more)nal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 4 mass standards and 1 pair of gloves.

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5" (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.

This listing is for 1 of 2 Scientific Industries SI-300X MultiMagstir Magnetic Stirrer. The unit is (more) in full working condition and is ready for immediate release. Four Position Multi Mag Stir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility. May be used with up to four 1 L flasks/beakers or three 1 L spinner flasks and a maximum sample weight of 10.0 Kg High and low speed range from 10-1200 rpm including reverse and interval stirring Provides low to high speed stirring and editable memory profiles Low/Medium/High power levels available for various sample viscosity Uses microprocessor control for precise and reproducible operation Manual Mode provides stir, stir reverse, and time functions Profiles Mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps Up to 4 stirring profiles can be saved Automatic Mode recalls and executes one of up to 4 user-defined profiles Stirring Positions 4 Display LCD (2 lines by 16 characters) Wattage 460 w Height (Metric) 48 mm Length (Metric) 375 mm Width (Metric) 325 mm

Hermle Z496-K Tissue Culture Bundle The Z496-K centrifuges offer the highest tube/bottle capacity in (more) our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K Tissue Culture Bundle includes: - Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) - Z496-1000 4 x 1000ml Swing Out Rotor with Rectangular Buckets - 1 Set of Z496-1000-A50 15ml Adapters - 1 Set of Z496-1000-A15 50ml Adapters - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

IKA Eurostar 40 Digital Overhead Stirrer Speed Range 0/30 to 2,000 RPM Viscosity Max. 30,000 mPas  (more)Stirring Quantity Max. 25 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universal laboratory stirrer designed for simple stirring tasks for quantities up to 25 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

Simultaneously perform dewaxing and antigen retrieval on slides prior to immunohistochemical stainin (more)g. Module offers consistent antigen retrieval for high quality immunohistochemistry. Using gentle heat, the retrieval device quickly produces outstanding results while maintaining the integrity of delicate tissue. In addition, most users can streamline testing practices by consolidating various antigen retrieval methods into only one or two PT Module antigen retrieval device procedures that can be run simultaneously. Precise temperature control without the damaging effects of temperature variations, microwaves or pressure delivers a level of consistency unmatched by any other instrument available. Easy to use, one-touch operation via built-in touchscreen Operator defined, preprogrammed time and temperature settings Dual reaction baths, each with 24-slide capacity, for simultaneous operation of two independent procedures Proprietary epitope recovery solutions for safe, nontoxic, solvent-free and environmentally improved dewaxing Provides for rapid, gentle heating, eliminating microwave and pressure cooker variability Maintains excellent tissue/cellular morphology Efficient, time-saving transfer of fully compatible slide racks directly to any Autostainer after treatment to avoid slide manipulation Fully programmable for overnight operation or delayed-start, early-morning pre-heating Can be connected to a remote computer to monitor and log antigen retrieval reports for regulatory compliance. The PT Module is fully automated and includes PT Monitor software for printing/maintenance of regulatory compliant procedural reports. Slide Capacity: 48 Glass slides (2 tanks of 24 slides) Reagent Capacity: 1.5 L Including PC

The Accutrend Plus meter is a combined meter for determining Glucose, Trygliceride, Lactate and Tota (more)l Cholesterol in blood. With the choice of strip, you also determine the research to be carried out. The Accutrend Plus system supports early recognition of cardiometabolic risks and the follow-up of the results of fat or blood sugar correcting therapy in the treatment room or at home by the patient himself. Can be used anywhere small, mobile pocket device. Immediate availability of results: therapeutic advice is immediately available Low-impact determination of cholesterol, triglycerides, glucose and lactate using proven capillary blood test strip technology Automatic performance and device self-check, code bars with positive bar identification and parameter recognition Storage possibility of up to 100 readings per parameter, with date, time and other characteristics High accuracy over the entire measurement path for all parameters