MultiScan MS20

HANNA HI97713 phosphate photometer, up to 2.50 mg/L New equipment in its original packaging HI97713  (more)comes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 0.08 to 2.50 mg/L Resolution: 0.01 mg/L Accuracy at 25°C: ±0.04 mg/L ± 4% of reading Method: Ascorbic acid Light source: LED with 610 nm narrow-bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

Pharmacia BIAcore Processing Unit Surface Plasmon Resonance System This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Pharmacia Thermo Block A.Pharmacia Thermo Block B.Pharmacia Thermo Block C.BIAcore upgrade kit.BIAcore software July 2021.BIAcore Advisor Tutorial.BIAcore Advisor Kinetics.BIAcore Preventive Maintenance Kit 4.BIAlogue Software set:BIAcore 1000 Control Software version 1.3 Disc 1 to 3BIAlogue System Specific Data.BIAapplications Handbook.BIAcore Upgrade Instrument Handbook.BIAevaluation 2.1 Software Handbook.BIAcore Getting Started 2000 Hand Book.BIAtechnology Handbook.BIAcore Qflex Kit Vitamin B12 Handbook.BIAcore Quant Biotin Kit Users Guide.BIAcore Quant Folic Acid Kit Users Guide.BIAcore Sensor Surface Hand Book.

This ILab 650 Automatic Biochemistry Analyzer Clinical Chemistry System was removed from a universit (more)y lab where it was surplus to requirements. The system is in full working order and was in use right up until its removal. We have a video of it working prior to removal. It comes with the following parts/accessories/spares PC Accessories include:-PC - See photos of software working in attachmentsViewSonic 17" MonitorKeyboard, Mouse & USB Cable Power supplyPN - 241-03110SN - 62R1753 6/8KD Sample Wheel Holds 75 x 5ml tubes2 x Cuvette Carousels Bottle/ContainerPN - 241-01000-51SN - U00704000496C1 Other Accessories/Consumables:-2 x Shimadzu Lamp - PG-64258/ME-MLP2 x Reagent Probes - 0018470500Box of 20 x RGT Bottle 25mlBox of 10 x RGT Bottle 20mlBag of 6 x Brown 20ml BottlesBag of 10 x RGT Bottle 50mlBag of 19 x RGT Bottle 25mlBag of 4 x 25ml RGT AdaptorsBag of 12 x 50ml RGT AdaptorsBox 3 x 5X5 CuvettesBox of 30+ Assorted size bottles it is in reasonably good cosmetic condition but has some marks from use.

Biobase BJPX-I Series refrigerated incubator. Capacity of 80, 100, 150, 200, 250, 300 or 400 L. Forc (more)ed ventilation. Temperature range from 0℃ to 65℃. Stability ±1℃; uniformity ± 2℃. Overtemperature alarm. Timer from 0 to 9999 min. Liquid crystal display. Internal glass door. Stainless steel interior. Shelves 2 pcs/adjustable. White light and internal socket. Wheels. User manual. Optional: microprinter and USB port. The Biobase BJPX-I refrigerated incubator is suitable for water analysis and determination of BOD, bacteria, mold, microorganism cultivation, conservation, plant cultivation and reproduction experiments.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), plastic box Number of  (more)pieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber

Application: Automatic mass comparator AK-4/10000 series is intended to automatic determination of w (more)eights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/10000 is designed to compare weights from 1 kg to 10 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets (500g)Researchers trust Benchmark’s Ag (more)arose LE to meet their electrophoreticneeds for a variety of applications. Now the same agarose is availablein a convenient, no mess tablet. The low EEO of the agarose promotes increased electrophoretic mobility,yielding improved resolution and shorter run times. This also allowsmacromolecules and larger particles (subcellular fragments, viruses, etc.)to migrate more freely through the gel matrix. The consistently low EEOreduces band distortion (caused by counter flow) that can result fromthe presence of excessive sulfate-rich negative ions. The quick dissolving EZ Pack tablet contains 0.5g (500mg) ofAgarose LE, eliminating the hands-on time and inaccuraciesnormally associated with weighing. Use of the tablet is not onlyconvenient and cleaner, it also provides better consistency andreproducibility gel to gel. Gel preparation is simple – add the desirednumber of tablets to electrophoresis buffer, allow to sit for twominutes and then heat and pour as usual. The resulting gels arehighly transparent, have exceptional thermal stability (ensuring safeand easy handling) and exhibit exceptionally low absorption ofchemical staining agents. INCLUDED: The Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets (500g) includes: - Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty