Gilson PIPETMAN M Multichannel P8x300M BT Connected Pipette

BIOMERIEUX V1222 GRAM POS (+) laboratory pipette 280 µl Fixed volume pipette: 280 µl Not calibrated

Laboratory pipette SARTORIUS PROLINE BIOHIT 1000 µl - fixed volume Equipment never used Fixed volume (more) micropipette: 1000 µl

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

IKA Pette Vario 2 - 20ul Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 2 - 20ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 2 - 20ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range2 - 20 µlIncrements0.02 µlAccuracy (Nominal Volume µl / %) ± 0.2 µl / 1%Precision (Nominal Volume µl / %)± 0.06 µl / 0.3%Accuracy (50% of Nominal Volume µl / %)± 0.12 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 0.06 µl / 0.6%Accuracy (10% of Nominal Volume µl / %)± 0.1 µl / 5%Precision (10% of Nominal Volume µl / %)± 0.03 µl / 1.5%

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

Yamato SDP-400 Vacuum Oven 127.4L, 110-120V Operating Temperature Range +10-220°C Operating Pressu (more)re Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Discover the ultimate solution for precise temperature control and reliable vacuum performance with the SDP Series Vacuum Oven, now available in SDP400 and SDP410 models. Offering an impressive operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, this oven is a versatile addition to any laboratory. The EZ-ZONE Watlow controls ensure ease of operation, and the KF25 access port provides convenient access. Enjoy exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.2°C at 80°C, ± 0.25°C at 150°C, and ± 0.3°C at 220°C. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior features 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W457 x D610 x H457 mm provide ample room for your samples. With a generous internal capacity of 127.4L, six sturdy shelves, each capable of holding up to 15.8 kg, and a maximum total load of 47.6 kg, this oven is ideal for a wide range of applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 13A or AC220 - 240V 7A) and is a robust and dependable workhorse for your lab, weighing in at ~144kg. It comes complete with three shelves, 12 shelf clips, a power cord, and four leveling feet, making it an essential asset for your laboratory needs.INCLUDED: The Yamato SDP-400 Vacuum Oven 127.4L, 110-120V includes: - 3 Shelves - 4 Leveling Feet - 12 Shelf Clips - Power Cord - One Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Julabo MAGIO MS-601F Refrigerated Circulator, 115V/60Hz Working Temperature Range -35°C to 200°C Co (more)oling Capacity 600W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-601F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BSH300 MyBlock Mini Dry Bath with Cooling Temperature Range Ambient -25°C to 100°C Tempera (more)ture Uniformity ± 0.2°C Ramp Time (20°C to 100°C) < 20 Minutes Features - Provides accurate and uniformtemperature control with powerful heating andcooling capabilities - Compact, fits on any crowded benchtop - Exchangeable blocks for 0.2 to 50ml tubes - Simple touchpad, digital control - Link two consecutive programs at once - Blocks sold separately (please view the Accessories tab) - 2 Year Manufacturer's Warranty