Gilson Pipetman L P200L 20 - 200 uL, Metal Ejector Pipette

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

The BBP300 +4ºC & -35ºC combination refrigerator / freezer offers 2x 286 liters of safe and reliable (more) storage capacity. The inner fans with forced air circulation ensure superior temperature uniformity and fast temperature recovery. The upper chamber standard comes with a double layer glass door where the bottom compartment comes with a stainless steel door. Both chambers have their own independent cooling system, controller and power. The BBP300 is the combination blood & plasma system and comes with 2 x 3 stainless steel roll-out drawers and standard 2 chart recorders. Capacity: 2x 286 l Doors: upper -1 glass door (double layer), bottom – 1 stainless steel door for both parts Air circulation: forced air circulation by inner fan Defrost: fully automatic defrost cycle Temperature range: +4ºC upper part / -35ºC lower part Temperature precision: ± 0.5ºC Temperature stability: ± 1ºC Temperature uniformity: ± 2ºC Microprocessor: adjustable set-point, high alarm, low alarm, door alarm, 2 separate and independent (audible, visual and remote alarm) Chart recorder: 2x 7- day chart recorder, factory installed in top panel Cabinet material: stainless steel inside and outside Dimensions (WxDxH): 710 x 800 x 1985 mm Internal dimensions (WxDxH): 590 x 675 x 590 mm (x 2 compartments) Drawers (WxDxH): 490 x 610 x 150 mm Weight: 190 kg

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 200 g for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator XA 5Y.KO series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The comparator features an aesthetic, large weighing chamber and a glass draft shield in one. Its asset is an automatic door opening system. The XA 5Y.KO series features an intuitive menu supporting a user in instrument operation.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA Vortex 3 Vortexer Shaking Movement Orbital Orbit Diameter 4 mm Speed Range 500-2,500 rpm Featu (more)res - Suitable for short-time (touch function) or continuous operation. - Wide, infinitely adjustable speed range. - Attachments and inserts available for tubes, microplates, and flasks - Attachments securely click onto appliance; special strap available for easy handling of flasks. - Sturdy zinc die cast casing with a compact design. - Stable at high speeds; ultra-high vibration damping and low self-heating motor. The vortex shaker is designed for both short-time (touch function) and continuous operation, making it versatile and efficient for various laboratory needs. Its wide, infinitely adjustable speed range and compatibility with multiple attachments and inserts (such as Eppendorf tubes, microtiter plates, and 250 ml Erlenmeyer flasks) allow for a wide range of applications. The shaker features a sturdy zinc die cast casing, a compact design, and stability at high speeds thanks to its special feet with ultra-high vibration damping and a self-ventilating motor for low self-heating.