Gilson PIPETMAN L Multichannel P12x300L with V-Rings, 20-300 uL Pipette

Digital dispenser BRAND DISPENSETTE S 1-10ML Brand reference: 4600340 volume range: 1-10ml Accuracy  (more)in % (+/-): 0.5% Accuracy in µl (+/-): 50 µl coefficient of variation in %: 0.1% coefficient of variation in µl: 10 µl Without purge valve

This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good cosmetic condition. We are unable to test this item further at our facility.

XA11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA microbalance. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 11 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson Pipetman L P200L 20 - 200 uL, Metal Ejector Pipette Designed for performance and comfort, PIP (more)ETMAN® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. Click Here to View Product Video CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P200L 20 - 200 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P200L 20 - 200 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range20 - 200 µLPipette ModelP200LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(6) { background-color: #fffacd; }Request a Formal Quote

Accuris P7700-20 NextPette Variable Volume Pipette, 2 to 20ul Inaccuracy ± 3 to 0.8% Imprecision ± 3 (more) to 0.8% Compatible Tip Size 200ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-20 NextPette Variable Volume Pipette, 2 to 20ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves Gilson 306 pump Gilson 1 (more)59 UV-Vis detector Gilson 321 pump Software

VACUUBRAND VACUU-Select, VSP 3000, and KF DN 16 Package for Fine Vacuum Control Upper Measuring Limi (more)t 750 torr Lower Measuring Limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from 5 mbar to fine vacuum (10-3 mbar) - Graphic user interface for simple operation - Predefined applications for quick, reproducible results - Application editor allows easy customization - Proprietary Pirani-type fine vacuum gauge offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VSP 3000, and KF DN 16 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with VSP 3000 and power supply - Solenoid valve VV-B 15C KF DN 16 - T-piece KF DN 16 - Hose nozzle DN 10 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Ohaus DFD32M500ES Defender 3000 Drum Floor Scale, 500 lb., 0.1 lb. Maximum Capacity 500 lb. (250 kg) (more) Readability 0.1 lb. (0.05 kg) Platform Size 30 x 30 in. (762 x 762 mm) Features - Weighing, Counting Parts, Checkweighing, Accumulation, Dynamic/Display Hold - Backlit liquid crystal display (LCD) - AC adapter with Auto Shut-off feature - Easy access communication port including RS232 interface - Constructed of mild steel with an epoxy paint finish - Convenient portability with polyurethane wheels - Low-profile design - 2 Year Manufacturer's Warranty