Gilson PIPETMAN G Multichannel P12x200G, 20-200 uL Pipette

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Pipettor liquid Drummond PipetAid. With charger 230 V. Volume from 1 to 100 mL. Valid for glass pipe (more)ttes and plastic.

Deliver brand new Series Autoclavable 5000 ál. Tip J. Increase in 50µl. Autoclavable to 121ºC. Ergo (more)nomic design. Precise adjustment of volume on the screen of 4 digits. Stripper tips. Handle made of TPE (thermoplastic Elastomer). Accuracy in continuous use. Chemical resistance and UV. Package includes: manual, certificate of quality, fat and service tool. Each package includes: Inexatitud Volume 5000 ál ± 0,50 % Inaccuracies 5000 µl ± 0,15% All pipettes are tested acc. the standard ISO 8655 / DIN 12650 has been calibrated in an accredited laboratory with ISO / IEC 17025. Manufactured in accordance with the standard ISO 9001: 2008 and ISO 13485: 2003 quality standards.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson PIPETMAN M P10mLM BT Connected, 1-10mL Pipette Volume Range 1-10mL Adjustable or Fixed Volume (more) Adjustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P10mLM BT Connected, 1-10mL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson Pipetman L P10 mL 1 - 10 mL Pipette Designed for performance and comfort, PIPETMAN® L comesin (more) a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P10 mL 1 - 10 mL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P10 mL 1 - 10 mL Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 10 mLPipette ModelP10LPipette RangePIPETMAN LNumber of Channels1Ejector TypePlasticPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(9) { background-color: #fffacd; }Request a Formal Quote

PR423 Ohaus precision balance The PR Series has been designed for competitive performance at an affo (more)rdable price and offers accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Featuring RS232 connectivity for easy communication, a backlit display and simple interface for smooth operation, the PR Series scales are perfectly designed for your workstation. Applications Basic Weighing, Parts Counting, Percent Weighing Display Backlit liquid crystal display (LCD). Operation AC adapter (included) Communication RS232 (one port included) Framework ABS top housing, removable stainless steel pan, removable glass draft shield with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dim, user selectable span setpoints, software lockout and reset menu, user selectable communication settings and print options , user-configurable project and user IDs, software overload and underload protection indicator, stability indicator. Learn how to navigate the Ohaus PR Series menu:

Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity for flexible storage and temperature control - Setting temperature range from 0°C to +70°C with 0.1°C accuracy - Energy-saving Peltier heating/cooling system integrated in the rear - ControlCOCKPIT with adaptive multifunctional PID-microprocessor controller and high-definition TFT-color display - Process time starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration values for precise control - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel exterior The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V offers precise temperature control with an energy-efficient Peltier heating and cooling system. Designed for laboratory environments, this incubator features a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, ensuring consistent results across a variety of applications. The ControlCOCKPIT adaptive multifunctional PID-microprocessor controller with a high-definition TFT-color display provides intuitive control, while the SetpointWAIT function ensures that processes only begin once the desired temperature is reached. Built with a 53-liter stainless steel interior, this incubator is both robust and easy to clean, making it ideal for long-term use. It supports up to four shelves with a maximum chamber load of 176 lbs, providing ample space for different sample sizes. Safety is a priority with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and an autodiagnostic system for fault analysis. With its durable textured stainless steel exterior, the IPP55 is built to withstand the rigors of daily laboratory use while maintaining high performance and reliability. INCLUDED: The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Ohaus ISLDMPHDG Incubating Shaker The Ohaus ISLDMPHDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLDMPHDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLDMPHDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload. The Ohaus ISLDMPHDG Incubating Shaker is brand-new . Includes: Power Cord Operator's Guide Manufacturer's Documentation Full 2 Year Parts and Labor Warranty Ohaus ISLDMPHDG Incubating Shaker SpecificationsTemperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Labconco RapidVap N2 Evaporation SystemChoice of two end-of-run signals: Timed signal: electric time (more)r pauses system, alerts user when set time has elapsed Temperature signal: system monitors temperature difference between sample block and heater caused by evaporative cooling; when evaporation is nearly complete, the two temperatures equalize, causing alarm to sound and PREHEAT/END ALARM light to flash Available with RS-232 Link on rear of unit for two-way communication Ideal for toxicology testing and environmental analysis Speeds evaporation by introducing nitrogen to the sample surface, an efficient alternative to Kuderna-Danish evaporators Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 500rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7910000 RapidVap N2 Evaporation System, 115V, 60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Matrix Orbital Delta FP Thermoshaker Speed Range 0 - 1500 rpm Time Setting Max. 6000 min Heat O (more)utput 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ FP is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ FP mixes, heats and has a universal holder for microtiter plates. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result. In addition, IKA Matrix Orbital Δ FP comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta FP Thermoshaker includes: - MATRIX Orbital Delta FP - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta FP Thermoshaker SpecificationsType of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 2000 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control10 RPM StepsTimeryesTimer displayTFTTime setting min. 1 sTime setting max. 6000 minOperating mode timer, continuous and program operationWorking with microtiter platesyesNumber of microtiter plates1Heating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy1.0 (@ 20°C … 45°C); 4.0 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate18 °C/minTemperature displayyesNumber of PCR plates1Number of Deep Well Plates (DWP)1Dimensions (W x H x D)216 x 147 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; }