Gilson MyPIPETMAN Select Multichannel P8x20, 2-20 uL Pipette

Carousel and loading stand for 1 pipette SARTORIUS 730981 New equipment in its original box For one  (more)pipette For use with PICUS and eLINE mechanical and electronic pipettes

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette PIPETMAN M Connected is a Bluetooth ena (more)bled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select P200, 20-200 uL, Metal Ejector PipetteFeatures - Designed to be ergonomic,  (more)safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 200 uL - 3 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select Multichannel P12x200, 20-200 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 200 uL - 3 Year Manufacturer's Warranty

Gilson Microman M100E Pipette, 10-100ul The ergonomically designed MICROMAN® E positive displacement (more) pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M100E Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

The Frontier™ 5000 Series FC5707-K Kit is a reliable, compact, low-speed multifunction centrifuge id (more)eal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5707-K model you will have the angular rotor with a maximum capacity of 8 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.445 g; maximum speed 6,800 rpm; tube diameter without adapter 18mm / 15ml, 1.5ml; outer/inner radius 86 mm; angle 32°. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN Compact design saves bench space: By packing all of its functionality into a small footprint, the FC5707 saves bench space in the laboratory. STRUCTURE AND FUNCTIONALITY Modern touch-wheel control and elegant waterproof interface: Designed for ease of use, the FC5707 features a convenient control on a waterproof user interface, which allows effective operation, even when gloves are worn. Simple and flexible operation for a wide range of applications: 8 x 15 mL angular rotor accommodates round bottom tubes or conical bottom tubes (only 4 conical bottom), including common blood tubes. Additionally, it can also be easily adapted with accessories to accommodate smaller tubes such as 7.5 and 1.5/2ml. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.800 rpm Maximum relative centrifugal force: 4.445 g Maximum flow rate (rotor): 8 x 15 ml Program memories: 99 Rotor Packaging: Angled Rotor: Rotore Angolare 8 x 15ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 15 ml Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

Genlab SP/LCI/320/SS/DIG Laboratory Incubator This was removed from a working lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks 6 Baskets/Drawers - 51 x 50 x 15cm

This was removed from a university facility where it was surplus to requirements. The unit is in ful (more)l working order but has not been run since 2020. It is in good cosmetic condition with minor marks.

Upright ultra-low freezer Thermo Forma 907. Volume 792 L. Range of Temperature of -50 to -86 ºC. A d (more)oor external and 5 internal. Display with microprocessor. Alarm system. Trays and instruction manual. Specifications: 230 V; 50-60 Hz Internal measures AnchxFxAlt cm: 93x68,5x130,8 External measures AnchxFxAlt cm: 118,9x94x197,6 Weight: 444,5 kg

IKA RCT basic Synthesis Solution 1000 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310  (more)°C Setting accuracy speed 10 rpm Features - Reduces hazard potential compared to oil baths, ensuring safe synthesis in 500 ml round-bottom flasks. - Made of solid anodized aluminum, withstands temperatures up to 300 °C. - Versatile Usage: Optional stand rod allows secure attachment of reflux condenser. - LED display for set and actual values, with temperature setting range from 0 to 310 °C. - ±5 K heat control accuracy at 100°C, ensuring precise temperature regulation. The RCT basic Synthesis Solution 100, designed for safe synthesis in 1000 ml round-bottom flasks. This system significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C. Optional stand rod securely attaches a reflux condenser. The perfect solution for cost-effective synthesis.INCLUDED: The RCT basic Synthesis Solution 1000 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.40 Flask carrier 1000 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf A-4-62Swing Bucket Rotor (buckets not included) for 5810/R The Eppendorf A-4-62 Rotor is a (more)n all-in-one swinging bucketrotor with a maximum speed of 4,000 rpm and RCFof 3,200 x g. The A-4-62 has awide range of adapters available to accommodate varying tube sizes. This rotoris used with Eppendorf centrifuge models 5810 and 5810R. Buckets are not included. INCLUDED: The Eppendorf A-4-62 Swing Bucket Rotor for 5810/R includes: - Full 1 Year Parts and Labor Warranty Eppendorf A-4-62 Rotor SpecificationsMax Rotational Speed4,000 rpmMax RCF3,200 x gCapacity4 x 250 mlCompatibilityEppendorf 5810/ 5810RAutoclavable121°C for 20 min