Gilson CARROUSEL Pipette Stand

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

IKA Pette Vario 20 - 200ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 20 - 200ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 20 - 200ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range20 - 200 µlIncrements0.2 µlAccuracy (Nominal Volume µl / %) ± 1.2 µl / 0.6%Precision (Nominal Volume µl / %)± 0.4 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 1 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.3 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.5 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.14 µl / 0.7%

Gilson MyPIPETMAN Select P10mL, 1-10 mL PipetteFeatures - Designed to be ergonomic, safe, and reliab (more)le while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 1 to 10 mL - 3 Year Manufacturer's Warranty

Boekel Scientific 1372 Laboratory Pipette Dryer, 115VThe Boekel Scientific 1372 Laboratory Pipette D (more)ryer, 115V can process up to 200 pipets from 7mm diameter by 375mm long. The vented top and base provide continuous flow of air through drying chamber and pipettes dry in approximately one hour. Complete with neon pilot light, toggle switch and grounded plug. INCLUDED: The Boekel Scientific 1372 Laboratory Pipette Dryer, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Scilogex Plastic Rotor capacity: 8 x 15ml / 12 x 10ml/7ml/5ml vacutainer used with DM0412 / DM0412E  (more) INCLUDED: The Scilogex Plastic Rotor capacity: 8 x 15ml / 12 x 10ml/7ml/5ml vacutainer used with DM0412 / DM0412E includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic BA310E LED Trinocular + BTI10 Camera Bundle The BA310E model introduces superior improvements  (more)both in optical and mechanical performance. The ELITE model's addition of a new rackless stage concept without prominent gear rack allows an even more convenient use of the x/y movement. For full freedom of illumination options, the new model has a complete and easy interchangeability of its 6V/30W Halogen bulb with LED modules. The Moticam BTI10 combines a space-saving camera hardware with new Wi-Fi technology. The 4MP Wi-Fi camera comes together with an 10” Android tablet to deliver fast live images (up to 30 fps) on any microscope with a vertical photo tube.INCLUDED: The Motic BA310E LED Trinocular + BTI10 Camera Bundle includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - 3W LED Module - USB cable - N-WF10X 20mm eyepieces - Moticam BTI10 - 0.35X C-Mount camera adapter - Abbe condenser with iris diaphragm and slot - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Julabo DYNEO DD-310F Refrigerated Circulator with Digital Output and Synthetic Refrigerant (R449A),  (more)115V/60Hz Refrigerant R449A Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Digital Output and Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 5800 Series Ultrasonic Cleaner 2.5 Gallon.