Adam Equipment LPB 623E Luna Precision Balance, 620g, 0.001g

Maximum Capacity: 6.1 kg Readability: 5 mg Repeatability: 3 mg Linearity: ±7 mg Settling Time: 2 s A (more)djustment: Internal / proFACT Advanced Weighing Pan Dimensions (WxD): 205 mm x 172 mm Dimensions (HxWxD): 102 x 214 x 411 mm

A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg Capacity 220 g Readability 0.000 (more)1 g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AE Analytical Balance ensures high-precision measurements with a capacity of 220 g and a readability of 0.0001 g. This balance features a fanless ionizer, standard in AE models, which effectively neutralizes static charges without physical contact, ensuring disturbance-free weighing. Additionally, it comes with an external IR sensor that facilitates precise and convenient measurements by enabling users to interact with the balance without direct contact, thus maintaining cleanliness and accuracy. Its Electronically Controlled Load (ECL) management allows for repeatability testing and automatic precision checks without the need for external weights, further enhancing the reliability of measurements. The balance is designed with a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput environments where time and accuracy are paramount. This advanced analytical tool simplifies daily operations and compliance with USP41 standards by alerting users when sample sizes are below minimum weight, which minimizes waste and maximizes efficiency. The balance's impact shock detection and overload protection systems safeguard the unit from accidental damage, ensuring long-term reliability and consistent performance. Additionally, operational simplicity is achieved through six straightforward keys and a quick toggle function that allows seamless switching between USB and RS-232C communications, catering to various laboratory data management systems. Further enhancing its usability, the GX-224AE is equipped with an illuminated, front-mounted level for easy leveling even when wearing gloves, and it offers both automatic self-calibration and one-touch internal/external calibration to guarantee valid results. The balance's extensive range of measurement units and its ability to perform percent calculations and piece counting adds to its versatility, making it suitable for a wide range of scientific applications. With its robust design and advanced features, including the supplemental IR sensor, the A&D Weighing Apollo GX-224AE Analytical Balance is a superior choice for professionals seeking precise analytical capabilities. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 1 kg), plastic box Number of pi (more)eces in the set: 13 Weights 1 g i 2 g – solid masses without adjusting chamber

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 1 mg Material: aluminum What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Ohaus EX124/AD Explorer Analytical Balance Introducing the OHAUS EX214/AD Explorer Balance: high-per (more)formance laboratory equipment that redefines the standard for analytical balances. This top-tier balance is part of the OHAUS Explorer Series, a unique line that seamlessly combines modern features with an intelligent design, promising to simplify even the most complex laboratory measurements.The EX214/AD Explorer Balance stands out with its large color touchscreen, providing intuitive navigation and convenient access to the system's advanced application modes. It has an icon-driven application software that includes features such as user management, a comprehensive library, and a minimum weight indication. These smart features make the balance not just a tool but a helpful assistant in your laboratory work.The Explorer Balance prioritizes accuracy with its fast stabilization times, optimized linearity, and excellent repeatability specifications. It includes enhanced vibration filtering, which guarantees precise results under different working conditions. Another standout feature is the AutoCal™ calibration system, ensuring the accuracy of your measurements is maintained over time and across a wide range of environmental conditions.The EX214/AD model incorporates an ingenious draftshield that offers easy entry to the weighing chamber. This draftshield can be accessed through a flip or sliding top door and the top-mounted side doors. Notably, these doors can be automatically controlled in /AD models, offering additional convenience and efficiency to your weighing process.Discover the future of laboratory measurements with the OHAUS EX214/AD Explorer Balance, a high-performance balance that offers unmatched functionality, ensuring precise and reliable results every time.INCLUDED: The Ohaus EX124/AD Explorer Analytical Balance includes: - Power Cord - One Year Manufacturer's Warranty

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System This system was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes: HAZMAT-0100045 Calmix Working Solution Bottle Expires : 11/30/2023

This item has just arrived in our stock. Please enquire for further details.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Hermle 50ml Inserts for Z326-100H Rotor (2pk) The Hermle 50ml Inserts are for use with the 4 x 100H  (more)Swing Out Rotor for the Z326 and Z326 K centrifuges. The Hermle 50ml Inserts for Z326-100H Rotor (2pk) are discounted, brand-new, and includes free shipping with a 3 year warranty. These adapters are ready for immediate shipment.