A&D Weighing Apollo GX-124AE Analytical Balance, 120 g, 0.1 mg

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Ohaus ST400D-G Portable DO Meter Measurement Range 0.00 – 20.0 mg/L(ppm); 0 – 50°C Measurement Accu (more)racy ±0.2 mg/L(< 8 mg/L) or ±0.3 mg/L(8~20 mg/L); ±0.3 °C Battery Life 12 hours with Disposable Batteries Features - Intuitive Software that Powers the Starter Series—Intuitive software and a well-organized display work in tandem to make operating the Starter Series a simple and straightforward task. - Compact and Ergonomic Design Creates a User-Friendly Experience—Starter portable meters fit comfortably in the palm of your hand. - Each meter comes equipped with a retractable built-in stand that can be used to prop it up on a flat surface. - Reliable Calibration Results for Accurate Measurement—Starter portable meters track the accuracy of the calibration process right on the display, so that you can measure with peace-of-mind. - Auto Barometric Pressure Measurement. - Auto Temperature Compensation with manual salinity compensation. - 99 measurement memory. - Last calibration data recall function. The OHAUS Starter Series Portable Dissolved Oxygen Meter is a compact and user-friendly meter, ideal for both field and lab measurements. It boasts a wide measurement range of 0.00 mg/L to 20.0 mg/L (ppm) and a temperature range of 0 to 50°C. The meter offers high accuracy with automatic temperature compensation and can store up to 99 readings along with the last calibration data. An easy-to-read color LCD screen displays readings clearly, while the intuitive software and ergonomic design ensure user-friendly operation. With features like auto barometric pressure measurement and manual salinity compensation, this meter offers reliable and accurate dissolved oxygen measurement in various environments. INCLUDED: The Ohaus ST400D-G Portable DO Meter includes: - 4 AAA Batteries - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap -105 C Cold Trap Brushed, stainless steel and glacier white, epoxy-coated ste (more)el exterior with blue accents; Temperature graph illuminates green when collector coil reaches operating temperature of -65C HCFC-free refrigeration system with two 1/3 hp compressors lowers cold trap to -105C (-157°F) in less than 40 min. 4L stainless steel collector Arylic lid with two Quick-Disconnect fittings for connection to a CentriVap Concentrator Stainless steel drain port with corrosion-resistant, nylon valve Grounding clip and ON/OFF power switch INCLUDED: The Labconco 7385020 CentriVap -105 C Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Reax 20/12 Overhead Shaker Introducing the Heidolph Reax 20 Overhead Shaker, a reliable, ro (more)bust solution designed to handle your most demanding sedimenting sample requirements. Boasting a carrying capacity of up to 12 bottles, the Reax 20 is ideal for a wide range of applications including environmental technology, paint processing, and materials industry quality assurance.The Reax 20 stands out with its considerable maximum permissible weight of 30 kg, allowing for the proper mixing of samples with a high solid content. Its impressive load-bearing capability, combined with versatile accommodation for different vessels, makes it an indispensable tool for laboratories and industrial settings alike.Safety has been given top priority with the Reax 20. Due to the powerful forces it can set in motion, this overhead shaker is equipped with an emergency stop switch, ensuring user safety at all times. It's suitable for mixing cylinders or wide-neck bottles, offering versatile usage for a variety of sample types. This device makes attaching bottles easy and fast, providing a seamless, user-friendly experience.Offering a variable speed set by a user-friendly analog control knob, the Reax 20 allows continuous adjustment from 1 to 16 rpm, enabling precise control over your sample processing.Its versatility extends to the range of vessels it can accommodate. With the use of attachments, it can hold other vessels with heights ranging from 160-270mm and a maximum diameter of 136mm.Invest in the Heidolph Reax 20 Overhead Shaker, a resilient, reliable, and adaptable solution for your sample processing and storage needs. Handle your sediment-prone samples with the ease and precision this robust device offers, and achieve outstanding results every time.Click Here to View Product Video INCLUDED: The Heidolph Reax 20/12 Overhead Shaker includes: - Power Cord - Three Year Manufacturer's Warranty

Accuris MR9620 SmartReader Multimode Microplate Reader w/ PC Software Included Detection Modes Absor (more)bance, Fluorescence, Luminescence Microplate Formats 6, 12, 24, 48, 96, and 384-well Plate Incubation Ambient +4°C to 45°C Features - Intuitive, 10-inch color touch screen - Stand-alone system with optional PC software (FDA CFR Part 11) - Monochromator-based system for UV through visible absorbance - Filter module system for fluorescence assays - Advanced PMT detector for luminescence assays - Optional automatic injection modules for flash luminescence - 2 Year Manufacturer's Warranty