Dendroscope

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) Working Temperature Range 20°C to 99°C Sh (more)aking Speed Range 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 0226 (more)39277 are for use with the Eppendorf A-4-38 Swing Bucket Rotor for the Eppendorf 5702/R Centrifuges. These adapters feature a capacity for 4 x 1.5/2.0ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 43mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf A-4-38 Swing Bucket Rotor

Accuris Analytical Balance, series Dx, Internal Calibration w/ Graphical Display, 220g The Accuris S (more)eries Dx Analytical Balances are robust, workhorse instruments that utilize Electromagnetic Force Restoration (EFR) technology. EFR is the gold standard for fast and reliable sub milligram mass determinations. The waterproof and wear resistant front panel has been designed to hold up to spills and years of constant use. A brightly lit, dot matrix graphical display clearly shows weighing results and also enables an intuitive menu system that’s easy to work with. Useful features such as dynamic animal weighing, piece counting, percentage weighing and more are quickly accessible. The front feet of the Dx balances are adjustable for proper leveling of the on a stable surface, and a leveling bubble behind the weighing chamber confirms proper installation. A Quik-Cal™ calibration system helps ensure that the balance is always calibrated and ready for use. Simply press the CAL button to perform an automatic calibration using the internal precision calibration weight. Auto calibration can also be set to occur at specific time intervals depending on user preference. INCLUDED: The Accuris Analytical Balance, series Dx, Internal Calibration w/ Graphical Display, 220g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Clean Air DLF series is a high quality vertical laminar flow workbench range for handling non-hazard (more)ous materials that require a clean working environment. DLF PCR Series is designed to perform PCR. These cabinets ambient air entering the work area, ensures product protection. Air speed: 0.35 m/s Lighting: >800 lux Noise level: <58 dB(A) Filters: Downflow HEPA filter (EN 1822), H14, efficiency 99.995% MPPS, Pre-filter efficient (EN 779): G3, efficiency 90% Am Dimensions (WxDxH): 1290 x 740 x 1360 mm Internal dimensions (WxDxH): 1190 x 600 x 685 mm Weight: 170 kg Including support frame