Randox RX Daytona Automated Biochemistry Analyser w/ PC & Software Lab

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

Bio-Rad Phd System laboratory analyzer for parts BIORAD PHD Without a computer For pieces

This Roche Reflotron Plus Dry Chemistry Analyser was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with some fairly minor marks from use.

BIOBASE BKM-P18III tabletop autoclave. Capacity 18L. Chamber size: Φ260x270mm. Self-adjustment of te (more)mperature and sterilization time, audible alarm at the end of the cycle. Possibility of manual adjustment of these parameters. Working temperature of 126℃. Working pressure 1.42 bar. Timer from 1 to 99 min. Double slot manometer, double temperature and pressure scale. Automatic protection against overtemperature and overpressure. Water level indicator with anti-drying protection. Power supply: AC 220V / 50Hz. Power consumption 2Kw. Weight 12 kg. User manual. The Biobase BKM-P18III portable autoclave is a reliable and efficient sterilization equipment. With a capacity of 18 liters, this autoclave is perfect for small to medium-sized laboratories, clinics and hospitals. It features a compact and portable design, making it easy to transport and use in different locations. In addition, it offers a wide range of sterilization functions, With its intuitive control panel and LCD display, it is easy to operate and monitor. The Biobase BKM-P18III portable autoclave is an ideal choice to ensure effective and safe sterilization of medical instruments and materials.

Olympus FV10-FIR Light Source w/ Stand Lab This item was removed from a university where it was surp (more)lus to requirement. It is in very good cosmetic condition with mechanical elements in good working order. We are unable to test it as it does not include a power supply cable.

This Dionex UltiMate 3000 HPLC System was removed from a university lab where it was surplus to requ (more)irements. This system has been inspected and tested by a qualified engineer. As a whole the system has passed. All modules that require software have been tested with Chromeleon v 6.8 and all modules communicate successfully. This system comes with Chromeleon v 6.8 installed on a PC but does not include a license and dongle. 1x Thermo Dionex AXP Metering Auxiliary PumpS/N Z0040311Powers on - Tested 2.5ml to over 1000 psi working as should no leaks 1x Dionex UltiMate 3000 Variable Wavelength Detector VWD-3100P/N 5074.0005S/N 8022629Powers on Status ok 1x Dionex UltiMate 3000 Pump LPG-3400 ABP/N 5037.0015S/N 8022830Firmware 3.05The system has been modified by a client from a quaternary to a binary pump. Pump tested at 2.5ml a minute, pressure steady at 12000psi, no leaks.All ok 1x Dionex UltiMate 3000 SR-3000 Solvent Tray without DegasserP/N 5035.9200 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 8019828Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 1050601Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 Analytical Autosampler WPS-3000 TP/N 5820.0020S/N 1000605Powers on. Self-check ok. Status ok. 1x Dionex UltiMate 3000 Column Compartment TCC-3000 SDP/N5730.0010S/N 8021955Firmware 1.20. Passed all functions test. Both switching valves work. The temperature cools and heats as should. The temperature is stable 1x Dionex UltiMate 3000 Fraction CollectorS/N 12904 AFC 3000Powers on. Connects with software. USB works but driver not present in the software 1 x Dionex UCI-50 Universal Chromatography InterfaceP/N 5911.0005S/N 8022442Powers on.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

M1 Mass Standard - rectangular weights. Nominal value - 50 kg.

IKA Dry Block Heater 2 Dry block heater, 2 blocks Number of Blocks 2 Blocks Heating Temp. Range Room (more) Temp. +5°C to 120°C Setup Plate Material Aluminum Alloy Features - Stepless adjustable temperature up to 120 °C - Timer: Countdown, adjustable from 1 min to 99h 59min - Counter: Display of heating time - Highly versatile with a large number of blocks - Error code display - Fixed safety circuit - Acoustic signal at end of test Digital block heater for three aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media test, coagulation test, blood-urea-nitrogen determination and in situ hybridizations.INCLUDED: The IKA Dry Block Heater 2 Dry block heater, 2 blocks includes: - Dry Block Heater 2 - Block remove tool - PT 1000.60 Temperature sensor, stainless steel - Two Year Manufacturer's Warranty