Radwag RADWAG Remote Desktop

LabSystems IEMS Reader MF 1401 with Genesis Software This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with minor marks. It comes with;-LabSystems Genesis software-Dust cover

This ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirem (more)ents. The unit had previously been in use up until the day it was removed. It was replaced with a new system. It is fully working. The unit powered on with no problems at our facility. It is in excellent cosmetic condition. It comes supplied with the PSU, USB lead, software CD, manuals and data books.

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

This Leco AMA254 Mercury Analyzer was removed from a university lab where it was surplus to requirem (more)ents. The unit powers on and is in reasonably good cosmetic condition but there is some surface rust visible on some of the components inside the unit. The glass window has been previously damaged, but has been repaired to a good standard. The Quicksilver software has been loaded onto a PC and communicates with the instrument. Included with it are; Manuals: 1x AMA254 Advanced Mercury Analyzer Operating manualWindows version 5.03 1x LECO AMA254 Advanced Mercury Analyzer Instruction manualSoftware Version 4.0X 1X ALTEC Quality Control Report on AMA254The unit is in good cosmetic condition it is not clear if any bits of the report are missing. CDs: 1x LECO AMA254 Mercury AnalyzerVersion 4.04Part No. 159-136-404 1x AMA254 (CD copy)Version 5.0.3-3Ser No. 216051145 3x LECO Coal Reference Material contents weight 50g Part Nos.502-685Sulfur % 1.16 ± 0.05ppm Mercury 0.040 ± 0.008 502-686Sulfur % 4.16 ± 0.14ppm Mercury 0.065 ± 0.017 502-687Sulfur % 2.06 ± 0.07ppm Mercury 0.130 ± 0.011

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Moisture Analyzer module, you can: read moisture analyzer data and store it in the MS SQL database; due to the possibility of online operation, monitor the parameters of currently running drying processes from a computer; display information about current measurements as well as the status and outcome of the drying process in real time; generate online graphs in relation to drying time; have access to the reports generated by moisture analyzers; operate and monitor up to 16 moisture analyzers; automatically start the connection of the moisture analyzers with the database after the computer is switched on (operation in system service mode); connect the moisture analyzers to the Ethernet network using an RS232 multiport card and an Ethernet/RS232 converter; filter dates and records, as well as group and sort orders and individual measurements; generate archived reports and graphs; define the permission levels for specific operators; select the language of each of the system components; customize the program’s graphical interface and modify reports and graphs; work over an Ethernet network.

The Alibi Reader is intended to read measurements stored in the ALIBI memory that were carried out v (more)ia the following balances and terminals: X2 series balances R series balances MA X2.A moisture analyzers MA R moisture analyzers PUE C32 terminal PUE HX5.EX terminal PUE HX7 terminal ALIBI Memory The ALIBI memory stores all measurements carried out by the X2 and R series balances and moisture analyzers. The ALIBI memory cannot be modified or deleted, therefore it may be called a black box of the balance. It is possible to export the ALIBI memory and other databases of a given balance to a USB flash drive. A previously exported file with the ALIBI memory saved to it can be read on a PC computer using the Alibi Reader. The data can be filtered (e.g. by date, by user code, by product etc.) The data are saved to CSV file. The Alibi Reader not only presents measurement readouts but it also enables reports generation. The reports can be generated from selected measurements and saved as XLS, DOC or PDF files. The latest software version: 0.0.5.6 Functions: Any previously exported file containing the ALIBI memory can be read on a PC computer; Operation of weighing instruments equipped with the PUE C32 terminal; Data filtering and reports generation; Saving ALIBI database to CSV file; Databases filtering; Language versions available: Polish, English, German, French, Spanish.

Esco Laminar Ductless Flow Cabinet Clean Bench Model AHC-4D1-1 Lab This item was removed from a univ (more)ersity where it was surplus to requirement. In excellent cosmetic condition with very little signs of previous use. This unit is in full working order. The previous owner reported the cabinet had done very little work and was working normally. It was last serviced by on 18-04-2024 Please take note of the following specifications: - Usable work area: 0.59 m^2- Air volume: 815 cm^3/h- Work height: 77 cm from the floor- Prewired and fittings for UV lamp (UV lamp not included)- The cabinet is mounted on a sturdy trolley with four castors, two of which can be locked.- Two pre-filters are installed in the roof panel. Order Code CR/PF-2 for a pack of 6.

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In video, the animation shows the ST2 refrigerated incubator with the possible shelves available: shelf with compartments; perforated shelf; grill shelf. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

COMBISTORAGE UNDERBENCH Optimize the space in your laboratory thanks to the COMBISTORAGE under hoods (more). Replace your furniture in the laboratory with useful safety cabinets for acids, bases and flammables. Features of models for flammable products: - Construction in electro-galvanized steel sheet with thicknesses from 1 to 1.5 mm cold bent - gray - External finish in acid-resistant epoxy resin and passage in a thermal tunnel at 200°C - Insulation with high density rock wool panels and calcium sulphate panels - Automatic closing of the doors when the ambient temperature reaches 50°C - 30mm thermo-expanding insulating gaskets - Air inlet and outlet with certified fire grids that close the ducts when the temperature reaches 70°C - Anti-spark brass hinge - Panels made of HPL (High Pressure Laminate) with high resistance to chemical and aggressive vapors - Structure that provides for replacements with spare parts. - Predisposition for ventilation with 100Ø mm flange for external connection or filtration ventilation system - Equipped with grounding - Adjustable feet - Key lock - Shelves made of plasticized steel or stainless steel with adjustable height - Model with chest of drawers made of plasticized steel - Shelves fixing with non-sparking aluminum pegs - Signage with pictograms according to ISO 3864 - 90 minutes fire resistance certificate EN14470-1 BV certified - EN16121 BV certification HOW TO CHOOSE YOUR SECURITY CABINET IN 3 SIMPLE STEPS? 1 - Measure the space you have available in your laboratory: under the hood, instead of a simple piece of furniture, in a space you do not use. 2 - Think about if you will need a particular support base 3 - Choose the cabinet model for acid chemicals, bases or for flammable products THE VERSATILITY OF COMBISTORAGE MODELS COMBISTORAGE UNDERBENCH safety cabinets can be combined on bases of different lengths. (It allows to have a single base for composition: ACIDS + BASES + FLAMMABLES). As an option, electric fans are available for ventilation, - Left, right or drawer door. - 13 widths available - 70 mm support bases - All models available in 620 or 720mm heights DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. CONTACTS US ➞

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 &times; 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7&rdquo; graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Accuris Precision Balance, 5000 Grams Accuris Precision balances quickly and accurately display samp (more)le measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams. Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The larger capacity models (1200g, 3200g, and 5000g) feature a more traditional top-loading design, come with larger weigh pans and have readability to 0.01g All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection. INCLUDED: The Accuris Precision Balance, 5000 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty