pruebaTRVQ

Voltaire ISR-9288 Grid Director This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616 This was removed from a university where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly. The fans are working but it has not been tested further.

This listing is for a DELL PowerConnect 2808 Smart Switch. The unit is in full working condition an (more)d is ready for immediate release. DELL PowerConnect 2808 Smart Switch The PowerConnect 2808 is an 8-port web-managed switch designed for diverse networking needs, from small workgroups to branch office aggregations. Key Features: Gigabit Ethernet Ports: 8 x 10/100/1000Base-T auto-sensing ports, ensuring high-speed connectivity for devices. Power Efficiency: Incorporates power reduction for short cables or inactive connections, contributing to energy savings. Auto-Negotiation: Automatically negotiates speed, duplex mode, and flow control for optimal performance. Virtual Cable Diagnostics: Uses Marvell’s technology for diagnostics, allowing for easier troubleshooting of connectivity issues. Visual Monitoring: Equipped with integrated LEDs for real-time monitoring of switch status and port activity. High Capacity: Switch Fabric Capacity: Up to 16 Gbps Forwarding Rate: 11.9 Mpps, supporting smooth data transmission. VLAN Support: Supports up to 64 port-based VLANs, enhancing network segmentation and security. Quality of Service (QoS): Provides 4 priority queues per port, utilizing 802.1p and IP DSCP values for traffic prioritization. Link Aggregation: Adheres to IEEE 802.3ad standards, supporting up to 4 link aggregation groups with 4 ports each, improving bandwidth utilization. Security Features: Local passwords and restricted IP addresses ensure secure switch access. Port Mirroring: Allows mirroring of four source ports for effective network traffic monitoring and troubleshooting. DHCP Support: Includes an internal DHCP server and client support for simplified IP address management. User-Friendly Management: Easily configurable via an intuitive web-management interface, with easy upload/download of configurations and switch software. Enhanced Performance: Jumbo frame support for packets up to 9000 bytes, optimizing large data transfers. Network Stability:

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

IKA RV 3 V-C Rotary Evaporator Features - Locking mechanism: red indicator shows unlocked position o (more)f vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-level model of the IKA rotary evaporator portfolio. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the transparent vertical coated condenser makes extremely efficient use of the 1500 cm² cooling surface. INCLUDED The IKA RV 3 V-C Rotary Evaporator includes: - RV 3 ECO - RV 3 eco drive - HB eco S099 Heating Bath - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 10.910 coated glassware set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 V-C Rotary Evaporator SpecificationsType of cooling verticalCooling surface 1500 cm2 Motor principleDCSpeed range20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight22.31 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V-CRV 10 Auto V-CRV 10 Digital V-CRV 3 V-CRV 8 V-CType of CoolingVertical CondenserVertical Condenser CoatedVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CVacuum Controller IntegratedYesYesN/AN/AN/ATimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.65 kg31.56 kg32.67 kg22.31 kg26.07 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle Chamber Volume (more) 3850ELP 65L Sterilization Temperature Range 105°C to 138°C Chamber Dimensions Hei-Clean 21.7 x 23.6 x 19.7 in. Features - Efficiently cleans and dries various labware including beakers, bottles, flasks, and test tubes - HEPA-filtered forced air drying for thorough sanitization - 20 preset programs with capacity for 20 custom cycles - User-friendly color touch screen for easy operation and control - Lower spindle rack with 25 positions and 10 glassware holders - Purified water rinse and built-in water softener - Spray arm and conductivity monitoring - No plumbing required for autoclave operation - 65L chamber volume for large batch sterilization - The 3850ELP Recycles water for efficient operation Introducing the Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle—your comprehensive solution for laboratory sanitation and sterilization. The Hei-Dro Clean 165UC Glassware Washer efficiently cleans and dries various labware, including beakers, bottles, flasks, and test tubes, with HEPA-filtered forced air drying, customizable programs, and a user-friendly touch screen. It features a lower spindle rack with 25 positions, purified water rinse, and built-in water softener. The 3850ELP Autoclave, with a 65L chamber volume, operates without plumbing, recycles water, and offers 4 validated cycles and 16 custom cycles for versatile sterilization. Together, they ensure thorough cleaning and reliable sterilization for all your labware and research needs. INCLUDED: The Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle includes: - Hei-Dro Clean 165UC Glassware Washer - Tuttnauer 3850ELP Autoclave - Lower Spindle Rack W/ 25 Positions - 10 Glassware Holders - Upper Standard Rack - Purified Water Rinse - Spray Arm Monitoring - Autoclave Stand - Detergent: 023213791 - Neutralizer: 023213793 - Water Softener Salt - Chamber Brite: 023212803 - Printer Paper (Pkg. of 5): 023212200 - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. - Recommended for standard applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW