29x ADInstruments PowerLab/200 with Software Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

15 x Extreme Networks LX4 XENPAK Model - 10114 Modules These were removed from a university AV depar (more)tment where they were surplus to requirements. They are all brand new and sealed in the boxes.

29x ADInstruments PowerLab/200 with Software Lab All items have been removed from a university where (more) it was surplus to requirement. They are all in good cosmetic condition and power on, we are unable to test them further at our facility.

This Solartron SI 1280 Electrochemical Measurement Unit  Model - 1280A was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

Thermo Scientific Heraeus CO2 Incubator This item was removed from a university laboratory where it  (more)was surplus to requirements. It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off. Therefore, it is listed as Spares/Repair. The incubator is in excellent cosmetic condition. Includes:- 3 shelves (47 x 43 cm) - Manuals - Sample holders Model: BB15Serial No.: 40998054Internal dimensions: D51 W47 H60 cm

This DEA Swift Coordinate Measuring Machine was removed from a university where it was surplus to re (more)quirement. This item is in reasonably good cosmetic condition but has not been tested at our facility. The previous client has deemed it faulty, so it is listed as Spares/Repairs. Table dimensions: 90 x 90cm Thickness 10cm

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor. The rotor is not included.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Labconco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer The Lab (more)conco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer includes the Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector, Labconco 794801010 Stoppering Tray Dryer, and an Edwards RV12 Vacuum Pump. The Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 794801010 Stoppering Tray Dryer lyophilizes moderate to large loads of vials or serum bottles and stopper them under vacuum. They offer temperature control from -40 to +40° C. Options include a 6-port manifold, isolation valve and sample trays. A pneumatic mechanism stoppers containers under vacuum on three large adjustable processing shelves, 16.5” x 12” each. An HCFC/CFC-free refrigeration system and electric heater cool and heat fluid medium that is circulated through the shelves to maintain shelf temperatures within ±1° C. The Edwards RV12 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer includes: - Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector - Labconco 794801010 Stoppering Tray Dryer - Edwards RV12 Vacuum Pump - All Vacuum Tubing - Edwards EMF 20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty