Ugo Basile DPA 37450-001 Dynamic Plantar Aesthesiometer Ästhesiometer 37400-002

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Huntleigh Nesbit Evans BirthRight Cervical Examination Stirrups Ths unit is in good cosmetic conditi (more)on and is mechanically sound.

Terumo TSCD-II Terumo Sterile Tubing Welder Lab This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition and powered on, we are unable to test it further at our facility. Model: TSCD-IIS/N: 202004580REF: ME-SC203AHTotal Welds: 00001994

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. It is in good cosmetic condition with marks from use. The system consists of: 1 x CAS1200 RobotSN - A110618 1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.All leads needed are included.

Agilent 2100 Bioanalyzer System with Software & Accessories This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and passes all diagnostic tests when connected to the laptop. The unit does require a service as it has exceeded 1000 hours since the last one. The included software has the licences for 2100 Electrophoresis & 2100 Instrument control. The included IKA mixer is specific for the chips this system uses. Includes: -HP ProBook 6560b Laptop With Power Cable -Agilent Bayonet Electrode CartridgePart no- 5065-4413 -Agilent test Chip Kit (Expired on 11/5/14)Part no- G2938-68300 -Safe lock tubes -14 RNA Nano Chips (Expired on 3/5/13) -Electrode Cleaner -STD Accessory Kit Series C -All relevant guides, manuals and information booklets -Agilent 2100 Expert Software -Agilent Chip Priming Station With Syringes -Agilent IKA MS 3 VortexerModel- MS 3 B S36

Gilson PIPETMAN M Multichannel P8x100M BT Connected Pipette PIPETMAN M Connected is a Bluetooth enab (more)led electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P8x100M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty