Shimadzu RF-20A Prominence Fluorescence Detector

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Jobin Yvon Horiba CCD-3000V Detection Unit was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requi (more)rements. The unit powers on and is in good cosmetic condition. Revision. 4.44Interface: 1.228x WDM sources It comes with; 1 x Kaba Micro- E Key Model No. ED9001

This Jobin Yvon Symphony Solo Fast CCD Detector was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in good cosmetic condition with minor marks from use. Model number- SYMPHONY-SOLO-FASTSerial number- 1074

OAI  Optical Associates Model J500/VIS Mask Aligner This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but will require a level of refurbishment to get i back into working order. The system powered on but only one of the two optical microscope lights illuminated and displayed an image of the surface of the work platform on the monitor. The optical cables were swapped over to test the other monitor and microscope, these also worked. A new bulb is required in the light box marked "Bulb Blown".The extractor fan works well.The UV Light Controller would not power up properly when connected, making loud clicking noises, this controller did work on another OAI system of the same model which suggests there is a problem in the main mask aligner unit with the UV feature.The microscope moved around smoothly on the mounting slides but could not be moved by the joystick. It is i good cosmetic condition with minor marks.

This listing is for a Jenway 7305 UV/Visible Spectrophotometer. The unit is in full working conditi (more)on and is ready for immidate realese. The Jenway 73 Series Single-Beam Spectrophotometers are designed for precise and versatile optical measurements across a range of applications. Featuring improved optics, these spectrophotometers deliver enhanced performance with a narrow spectral bandwidth of 5 nm and an absorbance range of 0.3 to 2.5 A, ensuring accurate and reliable results. Available in both visible and UV/visible spectrum models, the 73 Series offers a range of capabilities from basic absorbance measurements to advanced functionality, such as spectrum scanning, quantitation, and kinetics. Key Features: Improved Optics: The enhanced optical design delivers superior accuracy with a narrow 5 nm spectral bandwidth, providing clear and precise readings. Measurement Modes: Standard modes include absorbance, % transmittance, and concentration, allowing for a wide range of applications. Advanced Models: Higher-end models in the series add functionality for spectrum scanning, quantitation, and kinetics, expanding the range of experimental capabilities. Lamp Systems: Visible Models: Equipped with a tungsten halogen lamp for the visible spectrum, featuring a "lamp save" function that turns off the lamp during periods of inactivity to prolong lamp life. UV/Visible Models: Feature a xenon lamp with a "press to read" system, which only activates the lamp during measurements, ensuring accurate readings and extending the lifespan of the lamp. RS-232 Port and Software: Easily control and collect data via the RS-232 port, with software included for seamless integration into laboratory data management systems.

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Included are the following: 1 x GeoTech G100 Co2 AnalyserS/N - IN171951 x HygroClip 2 Advanced seriesS/N - 20684187 1 x GeoTech Cary Case 1 x Sample Tube Kit

This Zeiss LSM 510 Meta Confocal High Resolution Microscope System was removed from a university lab (more) as it developed a fault. The university reported: "We have a confocal microscope (Zeiss LSM510 Meta) which we are hoping to sell. It powers up but doesn’t fully work, there must be a loose connection somewhere but I don’t have the time or space to work out where." The units are all generally in reasonable used cosmetic condition. All parts do power up individually but we could not get the system to run either. We believe there should be a PC containing software that we do not have. The system is sold for spares/repairs. The system consists of: 1 x Zeiss Axiovert 200M Microscope (1312-732)Fitted with:1 x Zeiss 1269-455 Dual Illumination Source Motorised Mirror Switch.1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal.2 x Zeiss 1016-758 W-PI 10x /23 eyepieces.1 x HBO 100 Lamp 098.0042.000 (01/03163).1 x HAL 100 Lamp 42 30 00.With EBQ 100 Isolated Lamp PSU. 1 x Zeiss Laser Module 1294-260.Two of the wheels are broken, so they have all been removed and it has been put on a pallet. 1 x Zeiss LSM510 Meta System.Release 3.5 META 1305-593.With Zeiss Remote 1260-157. 1 x Microscope isolation table. Measures: 150cm L x 80cm W x 77cm H. 1 x Zeiss Temperature Control - 37 (0115.000). 1 x Zeiss AIM-SYSTEM Interface box 2436000101.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.