Mettler ME-36400 PowerPac Power Supply

Olympus BH-2 Microscope With Power Supply and Camera This was removed from a university lab where i (more)t was surplus to requirements. The unit powers on and is in good working order, however we were unable to test the camera. It is in good cosmetic condition with minor marks. Model- BH-2S/N- 1K0501 Olympus power supply includedModel- BH2-RFL-T3S/N- 08077 Microfire Camera includedS/N- AE623980-H Olympus 100W lamp Item includes the following: 2 x Olympus WHK 10x/20 Eyepiece Olympus SPlan 100PL 1.25 oil 160/0.17Serial#: 802664 Olympus SPlan 20PL 0.46 160/0.17Serial#: 805913 Olympus SPlan 40PL 0.70 160/0.17Serial#: 809756 Olympus SPlan 10PL 0.30 160/0.17Serial#: 814305

This listing is for 1 of 11 . The unit is in full working condition and is ready for immidate reale (more)se.

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

2 pair banana jack sockets Voltage: 0 – 8 V Amperage: 6.3 A

Bruker Ultraflex TOF/TOF Mass Spectrometer This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further at our facility. The unit has some faults as confirmed by the lab On arrival system was in fault mode with 'laser interlock' error. Restarted the laser through marathon control and tested. The laser started to fire but then the high voltage switched off. Tested HV supplies and found that the ISS could only reach 19kv instead of the required 25kv. Suddenly the system started working again and peaks were seen on the sample BUT the system has 2 issues that are intermittent. 1. 30kv supply 2. Laser

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Bed scales series is a precise weighing instruments verified in class III, designed for weighing a p (more)atient who lies on a bed. Four weighing modules connected through cables enable placing the scale under a bed of optional size. Lifting the bed is very simple with a jack specially designed for this purpose (it is designed for wheels size between 100 and 200 mm). The scales comes standard with an indicator PUE C315 series comprising a backlit LCD display and 5-button keyboard for simple operation of basic scale functions. Scale is transported on a trolley, which is simultaneously a stand for the scale indicator.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

M1 Mass Standard - knob weights. Nominal value - 250 kg.

Tuttnauer 5075ELP Lab Line Benchtop AutoclaveFeatures - Designed to autoclave everything in your lab (more), including liquids - Take advantage of Tuttnauer’s state-of-the-art control system with multi-color display - Automatic pressure locking system, door will not open when the chamber is over pressured - Integrated printer documents date, time, temperature and pressure - No water utility connections needed, just plug in and add water - Two integrated temperature probes for complete sterilization of liquids - Four validated cycles (glass, plastic, liquid A and liquid B-waste) - Stores up to 200 past cycles you can open on your PC - Create up to 16 custom cycles - Comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers - Optional biohazard filter (BH) prevents contaminated air from exhausting into the lab Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 5075ELP is a front-loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 5075ELP has an advanced multi-color control panel and a chamber made of 316 Ti stainless steel. Each model has several optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, F0 control, and more. INCLUDED: The Tuttnauer 5075ELP Lab Line Benchtop Autoclave includes: - 3 Trays - Tray Holder - Base Plate - Autoclave Stand - 2 Buck Boost Transformers - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty