Hoefer EPS 2A200

Amersham ECL Gel Box is a mini-gel system for high quality separation of proteins. Amersham ECL Gel  (more)is compatible with Tris-Glycine buffer and contain no SDS, makingit ideal for protein analysis under both native and denaturing conditions. Amersham ECL Gel is compatible with standard protein detection protocols.

The nanoPAC Mini Power supplies are an ultra compact and economic unit ideal for use with DNA (Horiz (more)ontal) and Protein (Vertical) electrophoresis systems. With enhanced features, such as a maximum constant voltage up to 300 and maximum constant current output of 400mA. The nanoPAC’s user- friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required. Its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. Maximum Voltage: 300 V Maximum Current: 400 mA Maximum Power: 60 W Number of Output Pairs: 2

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-36591 Hybaid Maxi 14 Rotisserie Hybridisation Oven ITEM-36595 Hybaid Shake 'n' Stack Hybridisation Oven [condition: Used]ITEM-36596 Fisherbrand HU10 Mini-Plus Horizontal Gel Electrophoresis Unit [condition: Used]ITEM-36597 Hoefer Electrophoresis Unit [condition: Used]ITEM-36598 Hoefer Electrophoresis Unit [condition: Used]ITEM-36599 Luckham 4RT Rocking Table [condition: Used]ITEM-36607 UVP Transilluminator [condition: Used]ITEM-36608 Compaq TFT7010 Monitor [condition: Used]ITEM-36609 Thermo Hybaid PCR Express With Spare PCR Block [condition: Used]ITEM-39835 Hanna Instruments Water Test ITEM-39836 Jenway 9200 DO2 Meter ITEM-39766 Extech 407510 Heavy Duty Dissolved Oxygen Meter ITEM-39767 Job lot of Hanna Instruments Pocket PH Meters ITEM-38983 FluidX Xcap Microplate capper [condition: Used]ITEM-23169 Small desk fan SFE/1 [condition: Used]ITEM-39770 Hybaid PCR Express ITEM-39771 MJ Research PTC-225 Thermal Cycler ITEM-39772 Grant W6 Sonic Bath ITEM-37438 CBS Scientific EPS-300 X Power supply [condition: Used]ITEM-37439 SS 3H Hotplate Stirrer [condition: Used]ITEM-39774 Spectra Physics SP8480XR Scanning Detector ITEM-39775 Tyco Electronics LVC2KW Power Supply ITEM-39776 GS Laboratories 6593-10 CO2 Control Backup System Lab ITEM-39777 Spectra System AS3000 ITEM-39778 Test Tubes w/ Holding Rack ITEM-39779 Perkin Elmer L226-0103 Model LC-240ITEM-39101 Vevor Rolling Mill [condition: Used]ITEM-37443 Jenway 1000 Hotplate Stirrer [condition: Used]ITEM-39782 Pyrex 20L FlaskITEM-39783 Zippette Flask and Dispenser

Hoefer PS600 Electrophoresis Power Supply Voltage 10 to 600 V in 1 V step Current 4 to 750 mA in 1 m (more)A steps Maximum Wattage 150 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 600 V, 3 to 750 mA, 150 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS600 Electrophoresis Power Supply is a robust midrange solution designed for a wide range of electrophoresis and blotting techniques, including large format and high throughput applications. Featuring a compact design, large handle, and user-friendly interface, the PS600 is easy to set up and operate in any lab setting. Its large, easy-to-read LED display allows for simple configuration of constant voltage or current parameters, timer settings up to 999 minutes, and effortless initiation of runs. With a power output range of 5 to 600 V and 3 to 750 mA, this unit provides a dependable 150 W of maximum power. The PS600 supports three key modes of operation: Constant Voltage Mode, where the power supply maintains the user-selected voltage by adjusting the current flow; Constant Current Mode, where the supply maintains the chosen current by modulating the voltage supplied; and Automatic Crossover, which seamlessly shifts between modes when the constant parameter cannot be sustained due to power limits. Additional features such as automatic recovery after power failure, short circuit and open circuit protection, and four sets of 4 mm output jacks add to its versatility and safety. Ideal for both continuous and timed operations, the Hoefer PS600 ensures reliable performance for various electrophoresis applications. INCLUDED: The Hoefer PS600 Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

kuroGEL Verti 1010YK. Refrigerated dual vertical electrophoresis system for two 10*10 cm gels, with  (more)mounting bracket. Includes 2 plain glass plates, 2 cut glass plates, 1 mock plate, 1.0mm spacers, 2 12-well 1.0mm combs, silicone tubing. Connector diameter 4 mm. Recommended voltage 100 - 150 V. User manual. The kuroGEL Verti 1010YK dual refrigerated vertical electrophoresis system has a novel type of clamping that allows it to work with most precast polyacrylamide gels, whether they are 8×10 cm or 10×10 cm and in a wide range of thicknesses. cassette. Two screws simplify clamping without using spacers. Self-sealing push-in connectors prevent spills that commonly occur when disconnecting coolant.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university (more) lab where it was surplus to requirements. The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable). 2 Shelves - 52 x 49cm It is in good cosmetic condition but has some minor marks from use

Zeiss Axiovert 200M Fluorescence Microscope This was removed from a university lab where it was surp (more)lus to requirements. The unit powered up but failed a service for the following reasons. • Microscope in poor condition – broken (motorisation fault).• Motorised base mirror will not move. It is sold for spares/repairs.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.